search

EVA-3D / eva-main

Main repository of the EVA project
https://main.eva-3d.page/
Other
274 stars 50 forks source link

[BUG] The bolt that secures the endstop mount to the top plate hits the MGN carriage on the Orbiter assembly #12

Closed tetele closed 3 years ago

tetele commented 3 years ago

Describe the bug

Wrong offset between the bottom plane of the top piece and the lip of the endstop groove on the top piece (the groove is too close to the bottom).

Actual behavior

The bolt that secures the endstop mount to the top plate hits the MGN carriage, so I can't secure the endstop mount to the top piece

Expected behavior

I can screw in the bolt that secures the endstop mount to the top piece all the way, so that the endstop mount is rigid against the top piece.

Pictures

https://imgur.com/a/RWgkyJs

Device

Additional context

Add any other context about the problem here.

pkucmus commented 3 years ago

Fixed, thank you: https://cad.onshape.com/documents/bb8303124bc8370b6d1924bc/w/8276a22c579374e8b02e9b96/e/09d4e72250a20923ab87fce6