Closed pkucmus closed 3 years ago
This maybe a more of a BLV project than EVA project but for the sake of tracking I'll leave this here
After your upgrade to EVA 2 and support of the Mosquito Hotend (Thanks a lot) i have printed all parts and have also encountered this problem. Mirroring the front helps but for the rear side this is not possible because the fan is the wrong way round. It looks like it is a problem with the BLV Cube design, because the belts are guided differently.
Here are two quick changes for the BLV Cube EVA2_BLV.zip
Hey I have a hevort not a BLV but the belt path is similar. I have a problem, the rear belts are flipped so that the teeth side faces away from the 2020 extrusion. The belt holders are designed for the belts facing the other way around. Is there a way to mitigate that or do i have to modify the belt holders so that they have teeth on the other side of the channel for the belt? ps. im using 6mm belts
Hey I have a hevort not a BLV but the belt path is similar. I have a problem, the rear belts are flipped so that the teeth side faces away from the 2020 extrusion. The belt holders are designed for the belts facing the other way around. Is there a way to mitigate that or do i have to modify the belt holders so that they have teeth on the other side of the channel for the belt? ps. im using 6mm belts
Please check in the Onshape document in the 'backs' folder. There's a high chance those are already there.
Finally published the conversion kit for the BLV MGN Cube on the contributions repo https://contrib.eva-3d.page/printer-compatibility/blv-mgn-cube/
Thank you, i will base my hevort adaptation upon your design. Thanks for uploadimg the STEP's, i was about to work on converted stl's
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
Moved from EVA 1: https://github.com/pkucmus/EVA/issues/32