search

EVA-3D / eva-main

Main repository of the EVA project
https://main.eva-3d.page/
Other
269 stars 50 forks source link

EVA 3 - BMG vs Cable management Conflict #80

Closed bubujoe closed 2 years ago

bubujoe commented 2 years ago

BMG stepper motor is in conflict with the main cable management

image

pkucmus commented 2 years ago

There is an alternative cable mount for it, I forgot to document it

pkucmus commented 2 years ago

Fixed in 3.0.2

david-antos commented 2 years ago

The "fat" cable guide mount doesn't actually fix that completely: the BMG motor is about 2 mm too deep and conflicts even with the cable guide mount, not only with the cable guide ("the basket"). So something like, e.g. https://www.printables.com/model/203244-eva-3-modified-cable-guide-for-bmg-extruder is necessary (this solution works for 5015 fans, but conflicts with 4028, though).

olivbd commented 2 years ago

The "fat" cable guide mount doesn't actually fix that completely: the BMG motor is about 2 mm too deep and conflicts even with the cable guide mount, not only with the cable guide ("the basket"). So something like, e.g. https://www.printables.com/model/203244-eva-3-modified-cable-guide-for-bmg-extruder is necessary (this solution works for 5015 fans, but conflicts with 4028, though).

I've the same issue with 4028 fan... You can check my work here: https://www.printables.com/model/261446-eva-3-modified-cable-guide-for-bmg-extruder-with-4