search

EVA-3D / eva-main

Main repository of the EVA project
https://main.eva-3d.page/
Other
274 stars 50 forks source link

Dragon UFH support #94

Open pkucmus opened 2 years ago

pkucmus commented 2 years ago

There's the new Dragon UHF hotend that has screws instead of tubes between the heat block and the radiator cage. This ticket is to add EVA support for it. Need to remember to document the difference between UHF and UHFm and that the "volcano" (Rapido UHF) ducts work.

pkucmus commented 2 years ago

Took the official Phateus model and fixed it up a bit: onshape image image

pkucmus commented 2 years ago

And here are the tastable parts: https://cad.onshape.com/documents/cb8bd513b980b411d50cd513/w/6e64f1ba8609c44902ccf372/e/40a0f896c01ef6c441d83662

pkucmus commented 2 years ago

For the UFH variant the volcano ducts should be used, the 8mm probe mount should be able to grab the probe even if lowered by 8mm (tell me if that's not true).

pkucmus commented 2 years ago

Additionally, you can try this approach: https://cad.onshape.com/documents/cb8bd513b980b411d50cd513/w/5ab9cded4098d1052df4fbf4/e/04a1727e01ef430de292dd1c Dragon UHF is extremely close to the plastic in EVA 3.0 - it's too close in my opinion the link above is a branch link to test a change in the universal face and the bottom parts (only standard duct) to check if more room will make things less melty image image