I go to flash it with r3dusb first release, and it doesn't work, the USB gets formatted as blank and nothing else happens
When I flash the same image with Rufus 3.22 (last version to work on Windows 7), it works fine.
Log
R3dusb x64 v4.6.2182
Windows version: Windows 7 SP1 x64 (Build 7601.27170)
Syslinux versions: 4.07/2013-07-25, 6.04/pre1
Grub versions: 0.4.6a, 2.12
System locale ID: 0x0415 (pl-PL)
Will use default UI locale 0x0415
SetLGP: Successfully set NoDriveTypeAutorun policy to 0x0000009E
Localization set to 'pl-PL'
Found 517 officially revoked UEFI bootloaders from embedded list
WARNING: Could not parse this system's SkuSiPolicy.p7b for additional revoked UEFI bootloaders
Found USB 2.0 device 'Kingston DataTraveler 3.0 USB Device' (0951:1666)
Found USB 2.0 device 'Seagate Expansion+ USB Device' (0BC2:2323)
Device eliminated because it was detected as a Hard Drive (score 53 > 0)
If this device is not a Hard Drive, please e-mail the author of this application
NOTE: You can enable the listing of Hard Drives under 'advanced drive properties'
1 device found
Disk type: Removable, Disk size: 32 GB, Sector size: 512 bytes
Cylinders: 3762, Tracks per cylinder: 255, Sectors per track: 63
Partition type: MBR, NB Partitions: 1
Disk ID: 0x00000000
Drive has an unknown Master Boot Record
Partition 1:
Type: FAT32 LBA (0x0c)
Detected File System: FAT32
Size: 28.8 GB (30942429184 bytes)
Start Sector: 2048, Boot: No
Scanning image...
ISO analysis:
Image is an ISO9660 image
Disk image analysis:
Image has an unknown Master Boot Record
Image is a bootable disk image
ISO label: 'haiku-r1~beta4-x86_64'
Size: 8.4 MB (Projected)
Note: File on disk is larger than reported ISO size by 1.4 GB...
Note: DD image mode enforced since this ISOHybrid is not ISO mode compatible.
Using image: haiku-r1beta4-x86_64-anyboot.iso (1.4 GB)
Format operation started
Requesting disk access...
No drive letter was assigned...
Will use 'E:' as volume mountpoint
Opened \\.\PhysicalDrive2 for exclusive write access
Requesting logical volume handle...
Opened \\.\PhysicalDrive2 for shared write access
Found USB 2.0 device 'Kingston DataTraveler 3.0 USB Device' (0951:1666)
Found USB 2.0 device 'Seagate Expansion+ USB Device' (0BC2:2323)
Device eliminated because it was detected as a Hard Drive (score 53 > 0)
If this device is not a Hard Drive, please e-mail the author of this application
NOTE: You can enable the listing of Hard Drives under 'advanced drive properties'
1 device found
No volume information for drive 0x82
Disk type: Removable, Disk size: 32 GB, Sector size: 512 bytes
Cylinders: 3762, Tracks per cylinder: 255, Sectors per track: 63
Partition type: MBR, NB Partitions: 0
Disk ID: 0x00000000
Drive has an unknown Master Boot Record
Issue description
I downloaded Haiku OS image from https://www.haiku-os.org/get-haiku/r1beta4/
File name: haiku-r1beta4-x86_64-anyboot.iso
SHA-256:
6E4B33045A0C36EFB2B8FE758EF3550BF87298A0C5A7C2FBDF4B155E19397AC7
I go to flash it with r3dusb first release, and it doesn't work, the USB gets formatted as blank and nothing else happens
When I flash the same image with Rufus 3.22 (last version to work on Windows 7), it works fine.
Log