issue for soaretx menu

[Tonyevoleurt]

Is there an existing issue for this problem?

• [X] I have searched the existing issues

What part of EdgeTX is the focus of this bug?

Transmitter firmware

Current Behavior

On switching on my radio and clicking on second, left hand button, below SYS, which opens settings/menu for Outputs, Wing Alignment, Mixes and batt, Switches, Centre ailerons, and Graph. Instead of the above each box of each widget says " ERROR in background ○: ?:0: attempt to perform arithmetic on a nil value". When no widget on screen it shows 9 of these messages. Sometimes on switching on some of the boxes are displayed but cannot be opened, it's also random as to which box appears. Jesper Frickman gave me a partial fix which returned the page to normal but still could not open the widgets Hope someone can help?

Expected Behavior

To work as before the update

Steps To Reproduce

See error

Version

2.9.4

Transmitter

RadioMaster TX16S / TX16SMK2

Operating System (OS)

No response

OS Version

No response

Anything else?

[pfeerick]

What version of the SD card pack are you using? And this is definitely 2.9.4, not 2.10.0-rc1 or a nightly firmware?

[Tonyevoleurt]

Hi, sorry for late reply, your message came in during the night. I'm in UK I can confirm that the firmware is v1.3.3.31 and edge-tx vers v2.9.4 " Providence. Regards Tony

On Sun, Mar 10, 2024, 11:44 PM Peter Feerick @.***> wrote:

What version of the SD card pack are you using? And this is definitely 2.9.4, not 2.10.0-rc1 or a nightly firmware?

— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1987415026, or unsubscribe https://github.com/notifications/unsubscribe-auth/BG2IJHAFMEHOYKBSS3TZBETYXTV4XAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGQYTKMBSGY . You are receiving this because you authored the thread.Message ID: @.***>

[Tonyevoleurt]

Further to you question I'm not sure about "sd card pack" but these are the headings of what I updated. Edge-tx firmware v2.9.4 Zip file c480x267 Edge-tx - cpn-win64-v2.9.4 Edge-tx-sdcard-sounds2.9.0 Egdetx themes

Just to mention, I put this on RC forums and it seems a few folks are having the same issue.

On Mon, Mar 11, 2024, 8:31 AM Tony Truelove @.***> wrote:

Hi, sorry for late reply, your message came in during the night. I'm in UK I can confirm that the firmware is v1.3.3.31 and edge-tx vers v2.9.4 " Providence. Regards Tony

On Sun, Mar 10, 2024, 11:44 PM Peter Feerick @.***> wrote:

What version of the SD card pack are you using? And this is definitely 2.9.4, not 2.10.0-rc1 or a nightly firmware?

— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1987415026, or unsubscribe https://github.com/notifications/unsubscribe-auth/BG2IJHAFMEHOYKBSS3TZBETYXTV4XAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGQYTKMBSGY . You are receiving this because you authored the thread.Message ID: @.***>

[jfrickmann]

I believe that the issue with the Lua scripts crashing was fixed and merged with #118. I don't know why it hasn't made it into the release.

When I used fixed scripts in Companion 2.9.4, another issue appeared where the Lua widgets apparently froze/did not respond to fullscreen mode.

You may find his report and the discussion on RCGroups here: https://www.rcgroups.com/forums/showthread.php?4515145-2-9-4-Edge-tx-update%21-No-soarETX-menu%21

[Tonyevoleurt]

Thanks, I'll check it out! Cheers

On Mon, 11 Mar 2024, 7:09 pm Jesper Frickmann, @.***> wrote:

I believe that the issue with the Lua scripts crashing was fixed and merged with #118 https://github.com/EdgeTX/edgetx-sdcard/pull/118. I don't know why it hasn't made it into the release.

When I used fixed scripts in Companion 2.9.4, another issue appeared where the Lua widgets apparently froze/did not respond to fullscreen mode.

You may find his report and the discuusion on RCGroups here: https://www.rcgroups.com/forums/showthread.php?4515145-2-9-4-Edge-tx-update%21-No-soarETX-menu%21

— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1989232351, or unsubscribe https://github.com/notifications/unsubscribe-auth/BG2IJHGQLANICP7WHG7S5I3YXYFONAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBZGIZTEMZVGE . You are receiving this because you authored the thread.Message ID: @.***>

[pfeerick]

Ok, you need the 'Latest' version of edgetx-sdcard, as the PR Jesper mentioned was done one month after the 2.9.0 sdcard pack was released, so you're probably still using the bugged widget code ;)

[Tonyevoleurt]

Ok. I only put this on last week so are you saying something has been changed since then?

[Tonyevoleurt]

Ok. I only put this on last week so are you saying something has been changed since then?

[factoryroll]

I can confirm the SoarETX GUI is back to normal for me running EdgeTX 2.9.4 and the pre-release/latest SD card files.

[Tonyevoleurt]

Thanks, can you confirm that it is the "EdgeTX "Centurion" v2.10.0-RC1 SD Card Pack" pre-release that you are now using please?

[pfeerick]

The "2.9.0" version sdcard pack is from six months ago, whereas "Latest" is regularly changing, and is, well, the latest version (i.e. it's a rolling release tag/version). Both "Latest" and ""EdgeTX "Centurion" v2.10.0-RC1" are the same at the moment, so either should do.

[Tonyevoleurt]

Thank you for your help, I will download later today and be in touch.

[Tonyevoleurt]

I don't understand what I must be doing wrong! I've just put the pre-release Centurian v2.10.-RC1 sd pack on my radio and no difference! Still can't open the widgets!

On Tue, 12 Mar 2024, 8:44 am Peter Feerick, @.***> wrote:

The "2.9.0" version sdcard pack is from six months ago, whereas "Latest" is regularly changing, and is, well, the latest version (i.e. it's a rolling release tag/version). Both "Latest" and ""EdgeTX "Centurion" v2.10.0-RC1" are the same at the moment, so either should do.

— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1991055074, or unsubscribe https://github.com/notifications/unsubscribe-auth/BG2IJHCA37GDQ73ADDXUDALYX26AXAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJRGA2TKMBXGQ . You are receiving this because you authored the thread.Message ID: @.***>

[jfrickmann]

@Tonyevoleurt is also reporting that he no longer can get fullscreen mode for his widgets. I wonder if this could be related to EdgeTX #4263? I assume it was merged into 2.9.2 and have therefore adviced him to try 2.9.1 to see if that helps.

[Tonyevoleurt]

Hi, just an update! I went to my back up v2.8.5 that I was using before updating, now that has the same issue, which it did not have before! So I went to v2.9.4 and that has the issue that I originally had, locked widgets. Its almost as if its a bug in my radio, if thats even possible and can not be removed by updating or going backwards. I put the sd card contents from v2.10.0 and the soar widgets are locked again, so are the F3K tasks and practice tabs! Video below shows state with v2.8.5. But with v2,9.4 and v2.20.0 widgets are locked

https://github.com/EdgeTX/edgetx-sdcard/assets/162825372/d64a0074-9431-4dfa-a0e5-c826e4f2fa1a

[Tonyevoleurt]

Thanks Jesper, I tried v2.9.1 but just the same, widgets locked!

On Thu, 14 Mar 2024, 1:55 pm Jesper Frickmann, @.***> wrote:

@Tonyevoleurt https://github.com/Tonyevoleurt is also reporting that he no longer can get fullscreen mode for his widgets. I wonder if this could be related to EdgeTX #4263? I assume it was merged into 2.9.2 and have therefore adviced him to try 2.9.1 to see if that helps.

— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997517468, or unsubscribe https://github.com/notifications/unsubscribe-auth/BG2IJHDPNVO5CWD3PGTNG23YYGT37AVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXGUYTONBWHA . You are receiving this because you were mentioned.Message ID: @.***>

[jfrickmann]

Have you tested any other widgets to see if it is something with my widget? ———————— Jesper Frickmann

Den 14. mar. 2024 kl. 12.03 skrev Tonyevoleurt @.***>:



Thanks Jesper, I tried v2.9.1 but just the same, widgets locked!

On Thu, 14 Mar 2024, 1:55 pm Jesper Frickmann, @.***> wrote:

@Tonyevoleurt https://github.com/Tonyevoleurt is also reporting that he no longer can get fullscreen mode for his widgets. I wonder if this could be related to EdgeTX #4263? I assume it was merged into 2.9.2 and have therefore adviced him to try 2.9.1 to see if that helps.

— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997517468, or unsubscribe https://github.com/notifications/unsubscribe-auth/BG2IJHDPNVO5CWD3PGTNG23YYGT37AVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXGUYTONBWHA . You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHubhttps://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997800163, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AD4WPG2TDM2ZMMTIOCD5XLDYYHC3LAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXHAYDAMJWGM. You are receiving this because you commented.Message ID: @.***>

[Tonyevoleurt]

Yes all other widgets and functions seem to be fine.

On Thu, 14 Mar 2024, 4:05 pm Jesper Frickmann, @.***> wrote:

Have you tested any other widgets to see if it is something with my widget? ———————— Jesper Frickmann

Den 14. mar. 2024 kl. 12.03 skrev Tonyevoleurt @.***>:



Thanks Jesper, I tried v2.9.1 but just the same, widgets locked!

On Thu, 14 Mar 2024, 1:55 pm Jesper Frickmann, @.***> wrote:

@Tonyevoleurt https://github.com/Tonyevoleurt is also reporting that he no longer can get fullscreen mode for his widgets. I wonder if this could be related to EdgeTX #4263? I assume it was merged into 2.9.2 and have therefore adviced him to try 2.9.1 to see if that helps.

— Reply to this email directly, view it on GitHub < https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997517468>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BG2IJHDPNVO5CWD3PGTNG23YYGT37AVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXGUYTONBWHA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub< https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997800163>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AD4WPG2TDM2ZMMTIOCD5XLDYYHC3LAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXHAYDAMJWGM>.

You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997805605, or unsubscribe https://github.com/notifications/unsubscribe-auth/BG2IJHDB4IBQ73XRK2NCXMTYYHDFJAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXHAYDKNRQGU . You are receiving this because you were mentioned.Message ID: @.***>

[jfrickmann]

Well what can I say - somebody messed something up. Right now I don’t even have a beater DLG to use for EdgeTX testing and I have a build and another repair I want done before I get to it.

I can’t even tell you what previous version of EdgeTX to install because they all have various bugs.

I will put it on my list but it will take some time before I get there. I will probably rewrite score keeping to have minimal dependence on other stuff and get rid of the configuration stuff. It’s just too much work to clean up when other developers break stuff. ———————— Jesper Frickmann

Den 14. mar. 2024 kl. 12.46 skrev Tonyevoleurt @.***>:



Yes all other widgets and functions seem to be fine.

On Thu, 14 Mar 2024, 4:05 pm Jesper Frickmann, @.***> wrote:

Have you tested any other widgets to see if it is something with my widget? ———————— Jesper Frickmann

Den 14. mar. 2024 kl. 12.03 skrev Tonyevoleurt @.***>:



Thanks Jesper, I tried v2.9.1 but just the same, widgets locked!

On Thu, 14 Mar 2024, 1:55 pm Jesper Frickmann, @.***> wrote:

@Tonyevoleurt https://github.com/Tonyevoleurt is also reporting that he no longer can get fullscreen mode for his widgets. I wonder if this could be related to EdgeTX #4263? I assume it was merged into 2.9.2 and have therefore adviced him to try 2.9.1 to see if that helps.

— Reply to this email directly, view it on GitHub < https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997517468>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BG2IJHDPNVO5CWD3PGTNG23YYGT37AVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXGUYTONBWHA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub< https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997800163>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AD4WPG2TDM2ZMMTIOCD5XLDYYHC3LAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXHAYDAMJWGM>.

You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997805605, or unsubscribe https://github.com/notifications/unsubscribe-auth/BG2IJHDB4IBQ73XRK2NCXMTYYHDFJAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXHAYDKNRQGU . You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHubhttps://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997887503, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AD4WPG7UIVNIHRPDMGTVPJLYYHH43AVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXHA4DONJQGM. You are receiving this because you commented.Message ID: @.***>

[Tonyevoleurt]

No worries Jesper, I can still fly but on my dlg's I can only adjust on the radio trims! I am still not sure that maybe I am at fault because other people are saying, for them, it's fixed! Gonna get a "child" to re load v2.9.4. ( my nephew he's a programmer and a Frsky lover, me I'm TX16s mk2,) Thanks for your help so far. Cheers Tony

On Thu, 14 Mar 2024, 5:16 pm Jesper Frickmann, @.***> wrote:

Well what can I say - somebody messed something up. Right now I don’t even have a beater DLG to use for EdgeTX testing and I have a build and another repair I want done before I get to it.

I can’t even tell you what previous version of EdgeTX to install because they all have various bugs.

I will put it on my list but it will take some time before I get there. I will probably rewrite score keeping to have minimal dependence on other stuff and get rid of the configuration stuff. It’s just too much work to clean up when other developers break stuff. ———————— Jesper Frickmann

Den 14. mar. 2024 kl. 12.46 skrev Tonyevoleurt @.***>:



Yes all other widgets and functions seem to be fine.

On Thu, 14 Mar 2024, 4:05 pm Jesper Frickmann, @.***> wrote:

Have you tested any other widgets to see if it is something with my widget? ———————— Jesper Frickmann

Den 14. mar. 2024 kl. 12.03 skrev Tonyevoleurt @.***>:



Thanks Jesper, I tried v2.9.1 but just the same, widgets locked!

On Thu, 14 Mar 2024, 1:55 pm Jesper Frickmann, @.***> wrote:

@Tonyevoleurt https://github.com/Tonyevoleurt is also reporting that he no longer can get fullscreen mode for his widgets. I wonder if this could be related to EdgeTX #4263? I assume it was merged into 2.9.2 and have therefore adviced him to try 2.9.1 to see if that helps.

— Reply to this email directly, view it on GitHub <

https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997517468>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BG2IJHDPNVO5CWD3PGTNG23YYGT37AVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXGUYTONBWHA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub<

https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997800163>,

or unsubscribe<

https://github.com/notifications/unsubscribe-auth/AD4WPG2TDM2ZMMTIOCD5XLDYYHC3LAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXHAYDAMJWGM>.

You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997805605>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BG2IJHDB4IBQ73XRK2NCXMTYYHDFJAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXHAYDKNRQGU>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub< https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997887503>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AD4WPG7UIVNIHRPDMGTVPJLYYHH43AVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXHA4DONJQGM>.

You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1997953559, or unsubscribe https://github.com/notifications/unsubscribe-auth/BG2IJHFJIOCISUAO3TY3JLTYYHLQNAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJXHE2TGNJVHE . You are receiving this because you were mentioned.Message ID: @.***>

[jfrickmann]

I pulled my TX16S out of storage, formatted the SD-card and loaded 2.9.4 and the "Centurion" v2.10.0-RC1 SD Card Pack on it.

And things worked.

Therefore the problem is something in your end. What I can think of right now is:

• Find and delete all *.luac files under the WIDGETS folder on your SD card
• If that doesn't work, take another backup, format your SD card and install what I did above.
• If that doesn't work, maybe it's a hardware failure?

[Tonyevoleurt]

Ok thanks Jesper, I have done the same already but I will do it again as you have described. Thanks Tony

On Thu, Mar 14, 2024, 6:22 PM Jesper Frickmann @.***> wrote:

I pulled my TX16S out of storage, formatted the SD-card and loaded 2.9.4 and the "Centurion" v2.10.0-RC1 SD Card Pack on it.

And things worked.

Therefore the problem is something in your end. What I can think of right now is:

• Find and delete all *.luac files under the WIDGETS folder on your SD card
• If that doesn't work, take another backup, format your SD card and install what I did above.
• If that doesn't work, maybe it's a hardware failure?

— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1998066969, or unsubscribe https://github.com/notifications/unsubscribe-auth/BG2IJHBEBY6KPB2YVP6S33LYYHTG3AVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJYGA3DMOJWHE . You are receiving this because you were mentioned.Message ID: @.***>

[jfrickmann]

Otherwise you need to get hold of your nephew! ———————— Jesper Frickmann

Den 14. mar. 2024 kl. 14.36 skrev Tonyevoleurt @.***>:



Ok thanks Jesper, I have done the same already but I will do it again as you have described. Thanks Tony

On Thu, Mar 14, 2024, 6:22 PM Jesper Frickmann @.***> wrote:

I pulled my TX16S out of storage, formatted the SD-card and loaded 2.9.4 and the "Centurion" v2.10.0-RC1 SD Card Pack on it.

And things worked.

Therefore the problem is something in your end. What I can think of right now is:

• Find and delete all *.luac files under the WIDGETS folder on your SD card
• If that doesn't work, take another backup, format your SD card and install what I did above.
• If that doesn't work, maybe it's a hardware failure?

— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1998066969, or unsubscribe https://github.com/notifications/unsubscribe-auth/BG2IJHBEBY6KPB2YVP6S33LYYHTG3AVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJYGA3DMOJWHE . You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHubhttps://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-1998087991, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AD4WPG5P777MYGLBZFC2FKTYYHU2TAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJYGA4DOOJZGE. You are receiving this because you commented.Message ID: @.***>

[frankiearzu]

Just FYI, the code in the latest sdcard is compatible with 2.8.x and 2.9.x. Took the change done by Jasper, and fixed to account for difference in behavior of model.getCurve().

Recently for 2.10, there was also a problem on the "switches" screen. The way to identify the last switch of the radio no longer works in 2.10. Just added a PR for it.. issue: #142

[Tonyevoleurt]

Thanks for the info Frankie. I've given up with my problem. Tried wiping my radio, had someone else try, now on 2.10.2. Must have tried about 15 times to get soar etx working on my radio, it's as if the bug is now in my radio, I know thats not possible but it's what it seems like. I understand its fixed for everyone else! Anyway I've redone my dlg programming myself so I learnt a lot about edge tx in the process. Thanks for all your help.

[pfeerick]

Hopefully you managed to get to the bottom of this... closing as this should have been resolved via updating the SoarETX files on your SD card.

[Tonyevoleurt]

No, Peter. I have given up on soar ETX. I've changed SD card twice, I've gone back to previous versions, I've had other guys, who know more than me try to change versions all to no result. Everything else is great it's just soar ETX! Tried everything that Jesper suggested so now just not using it! On the bright side I can now program my dlg's myself! Thanks for all your help.

On Sat, May 11, 2024, 10:05 AM Peter Feerick @.***> wrote:

Hopefully you managed to get to the bottom of this... closing as this should have been resolved via updating the SoarETX files on your SD card.

— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx-sdcard/issues/137#issuecomment-2105645957, or unsubscribe https://github.com/notifications/unsubscribe-auth/BG2IJHF4CTBJP3FVEWJXJUTZBXNNDAVCNFSM6AAAAABEPLNVN6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMBVGY2DKOJVG4 . You are receiving this because you were mentioned.Message ID: @.***>