Closed jrwieland closed 1 year ago
Hi it is a very nice one :-)
some things to think about.
Great work!
do we really need to support the FLY-BAR? does it still popular? around me, all have flight-controller (aka: flybarless)
Most definitely. There are still a lot of heli flyers with older helis. Plus, there's the whole choice thing ;)
I put the T.Gain on trim T5
Might just have to be wary of transmitters that don't have a T5
I'll be back to look at this properly in a few days... please feel free to ping me if that is longer than a week ;)
@offer-shmuely
Thank you for the feedback, I apologize for the delay in responding I had a critical project for work that was taking all of my attention/energy.
One thing to consider with all of the wizards. They are designed to be used by new users to EdgeTX and load a basic setup for that particular model type, and get them in the air. Most experienced users will utilize their own template or copy an existing model as a starting point rather than starting from scratch using a wizard.
I thought about making the initial selection for the curves" FLAT" for all ide ups (since that is what i run on all my FM's) and the modern ESC's spool much slower than the old word counterparts. as Peter said it comes down to choice. Do I put this one or that one first. Do I impose my preferences or make them decide by the order of the curves.
Utilizing "T.Gain" instead of GYRO is a good idea, I used gyro due to its common use with other radio systems.
Using the term "banks" tells me you use a "V" or kbar. Having announcements pre-programmed takes away from the "Customizable aspect". We all came to open source due to the fact that we could make it "Your radio , your way". The more that is added to the wizards makes it more and more like futaba, spectrum etc. Doing the simple tasks of setting announcements/warnings when something is changed is the initial steps to fully customizing it IMHO.
Adding the name to the outputs is another good idea. Thank you. I'll make those changes this weekend
Thanks for good work I am using ikon2 & spirit2 and planning to give rotorflight a chance sometime
@pfeerick for uniformity should I add output names to the other wizards?
c480x272
bw128x64
bw212x64