Closed FrippeF closed 2 years ago
Don't have the module in tx auto mode.
Hi, I have a similar problem with Radiomaster Zorro combined with IRC Ghost Lite Tx as an external module. The external module is able to bind and communicate with the RC but there is no communication between the RC and IRC Ghost External Module. The problem persists on the stock firmware version as well latest version v2.8.3.
In the SYS/VERSION/Modules-RX Version/ Ext Module - "No Info" .... Seems there is some kind of communication issue between the Zorro and IRC Ghost bud not able to figure out what. any help is much appreciated.
The external module is able to bind and communicate with the RC but there is no communication between the RC and IRC Ghost External Module.
Do you mean that you were able to bind (using the module's own controls) and the module can communicate with the RX, but there is nothing happening between the module and the handset/RC?
Have you tried what the prior user mentioned - go into the menu on the module, go into Mode, and change Tx Mode from Auto to Manual, and then set the protocol to GHST. I noticed on my JR Micro sized Ghost module I was having some issues when trying that just now, and it was somehow suggesting CRSF was a valid protocol to choose when I first change it from Auto (and it was non-responsie to the handset)?! Then it correctly only offered up GHST and SBUS (1.0.5.4 firmware).
Is there an existing issue for this problem?
What part of EdgeTX is the focus of this bug?
Transmitter firmware
Current Behavior
Radiomaster Zorror elrs will not work with Irc Ghost module.
Expected Behavior
The Radiomaster zorro elrs will take with Icr Ghost module
Steps To Reproduce
It start the module. But nothing happend on the in stick on the module
Version
2.7.0
Transmitter
Radiomaster Zorro
Anything else?
No response