search

EdgeTX / edgetx

EdgeTX is the cutting edge open source firmware for your R/C radio
https://edgetx.org
GNU General Public License v2.0
1.56k stars 333 forks source link

[TX12] Remote control channel settings issue #2213

Open lida2003 opened 2 years ago

lida2003 commented 2 years ago

Is there an existing issue for this problem?

What part of EdgeTX is the focus of this bug?

Transmitter firmware

Current Behavior

  1. Under the [mixs] page, assign SB to ch6 through the roller; edgetx 2.7.1 doesn't work and opentx 2.3.11 works.
  2. Under the [logical switch] page, use the SA key to assign V1 and V2; edgetx 2.7.1 doesn't work and opentx 2.3.11 works.

Anything or way of channel settings changed in edgetx?

Expected Behavior

edgetx does the work as opentx 2.3.11 did.

Steps To Reproduce

  1. Flash TX12 with default configuration (OpenTx 2.3.11 or EdgeTx 2.7.1) (or remove all channel setting except pitch/yaw/roll/throttle)
  2. go to [logical switch] page, add L01 --> sticky, SA(down) to V1, V2 (OpenTx select V1 and V2, press SA button to do the work)
  3. go to [mixs] page, assign SB to ch6 (OpenTx use roller to select and save the settings; EdgeTx doesn't find SB)

Note: Step 2/3 EdgeTx doesn't work as OpenTx did.

Version

2.7.1

Transmitter

RadioMaster TX12 / TX12MK2

Anything else?

No response

gagarinlg commented 1 year ago

is this still an issue with 2.9?

lida2003 commented 1 year ago

is this still an issue with 2.9?

I didn't see any other feedback about this issue. I'm using OpenTx 2.3.11, and so fa so good.