Open Lexflyer2022 opened 1 year ago
You will probably need to upload a copy of your MODELS and RADIO folders (either zip them up, and upload here, or read the transmitter via Companion, and zip and upload the ETX file here).
It may also be worth backing up your SD card, and trying 2.8.0 to see if the issue is fixed there. Or trying with a difference SD card.
Good day Peter, I was not expecting to hear back so quickly. Amazing!! Thank you so much. I did try 2.8.0 with no success. As of right now we are in the middle of a power outage once again. I will zip them up and send them to you as soon as I can.
Cheers,
Michael
Hello again Peter, I think I have the folder here. TX16.zip
Have a new sd card in radio. But he same problem still exists. If I choose a unnamed model from model select. I can then select the model that crashes the radio into Emergency mode. I cannot go from one active model to the Apprentice S8R without the radio going into Emwercency Mode however.
Is there an existing issue for this problem?
What part of EdgeTX is the focus of this bug?
Transmitter firmware
Current Behavior
Starting my RM TX16s V2 edge TX 7.2.2 The model I currently have running and selecting another model My radio screen reads Emergency Mode. It then locks up the radio. Restarting will clear the issue once only. Then it is repeated with the above scenarioo. I have written a new bin file to the radio with no change in behavior.
Expected Behavior
The model selected should work when going to fly my plane
Steps To Reproduce
Simply change models to a different plane. Then once selected the screen goes black and emergency mode appears on screen
Version
2.7.1
Transmitter
Radiomaster TX16S / TX16SMK2
Anything else?
I can if this screen is required.