no throttle after a certain sequence of running wizard loader LUA

ror1948 commented 1 year ago

Is there an existing issue for this problem?

[X] I have searched the existing issues

What part of EdgeTX is the focus of this bug?

Other (Please specify below)

Current Behavior

bug in WizardLoader.lua or plane.lua create new model using wizard and answer NO motor run LUA script Wizard Loader and select plane and say Motor YES when you test for a throttle output on the Rx , you will have no throttle but there is output on throttle channel in the output screen

Expected Behavior

expect there to be throttle output on Rx

Steps To Reproduce

go to manage models and select new model
then select wizard
select plane
answer motor NO
answer remaining questions any way.
finish the wizard Back on main screen on the newly created model press SYS run wizard loader LUA by default it operates on the current selected model select plane -answer motor YES
answer remaining questions any way.
finish the wizard bind model to a Rx and you will have NO throttle but you will see the throttle channel move in the output screen

Version

Nightly (Please give date/commit below)

Transmitter

Radiomaster TX16S / TX16SMK2

Operating System (OS)

No response

OS Version

No response

Anything else?

2.10.0 nightly b0e64c8d 2023;07;11 2;46;57

3djc commented 1 year ago

If it moves ok on channel monitor, then LUA did it job just fine, issue is somewhere else. Please share a copy of your SD with the radio set to the model it is happening to.

ror1948 commented 1 year ago

It is very repeatable. I did it on two different radios with different firmware and 2 DSM Rx.Orange and AR610.

Sent from Yahoo Mail on Android

On Sun, Aug 20, 2023 at 3:07 a.m., @.***> wrote:

If it moves ok on channel monitor, then LUA did it job just fine, issue is somewhere else. Please share a copy of your SD with the radio set to the model it is happening to.

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: @.***>

3djc commented 1 year ago

Can I have a picture of your module settings and the mixer screen?

ror1948 commented 1 year ago

my settings and sdcard...had to delete several dir to reduce size nothrottleSD.zip models,radio and scripts are all there no-throttle.zip

model is called nothrottle

3djc commented 1 year ago

I also need a picture of your module setup please

ror1948 commented 1 year ago

Can I have a picture of your module settings and the mixer screen?

by module settings do you mean internal RF?

ror1948 commented 1 year ago

4in1 has mm-stm-serial-aetr-v1.3.3.20

3djc commented 1 year ago

You model works fine here. I don't have any spektrum, so used frsky receivers, but clearly the multi gets what it should, not sure where it breaks after that

https://youtube.com/shorts/Ds9mGg1OLtI?feature=share

ror1948 commented 1 year ago

yes but you changed alot to set that up and rebind to frsky different mapping on frsky

ror1948 commented 1 year ago

by module settings screen do you mean internal RF screen?

From: 3djc @.> Sent: Sunday, August 20, 2023 2:12 PM To: EdgeTX/edgetx @.> Cc: ror1948 @.>; Author @.> Subject: Re: [EdgeTX/edgetx] no throttle after a certain sequence of running wizard loader LUA (Issue #3951)

I also need a picture of your module setup please

— Reply to this email directly, view it on GitHubhttps://github.com/EdgeTX/edgetx/issues/3951#issuecomment-1685357167, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AXSV3B2MSPBZ2QG6BSALISDXWJHSHANCNFSM6AAAAAA3W7VEXI. You are receiving this because you authored the thread.Message ID: @.***>

3djc commented 1 year ago

yes but you changed alot to set that up and rebind to frsky different mapping on frsky

Absolutely not, I used fully your sd, only changes are with multi settings, nothing changes edgetx side between the two. I suggest you try with another spektrum receiver, as I can see nothing wrong with your model. Please also ensure disable channel map is NOT enabled in module settings

ror1948 commented 1 year ago

well maybe bug is in the multi side. Like I said before "It is very repeatable. I did it on two different TX16s radios with different firmware and 2 different DSM Rx. one Orange and one AR610."

it maybe a DSM multi issue

3djc commented 1 year ago

Unsure, maybe another dev does have a spektrum receiver to try

EdgeTX / edgetx