Nothing showing on Display

[etscho1st]

Hello ED., no i finaly could start the radio without reebots but now i get a new problem. I´am using a Chinese nextion like TJC. I created a HMI with the exactly configuration as yours but now when the esp32 is booting and starting nothing is happening. It only stay at page0 and not showing something. Do u may know what can i try else thx?

` D: Starting ESP32-radio running on CPU 1 at 240 MHz. Version Mon, 25 Mar 2020 10:45:00 GMT. Free memory 294196

D: Display type is NEXTION

D: Partition nvs found, 20480 bytes

D: Read 38 keys from NVS

D: pin_ir set to -1 D: pin_enc_clk set to -1 D: pin_enc_dt set to -1 D: pin_enc_sw set to -1 D: pin_tft_cs set to 15 D: pin_tft_dc set to 2 D: pin_tft_scl set to -1 D: pin_tft_sda set to -1 D: pin_tft_bl set to -1 D: pin_tft_blx set to -1 D: pin_sd_cs set to -1 D: pin_vs_cs set to 32 D: pin_vs_dcs set to 33 D: pin_vs_dreq set to 35 D: pin_shutdown set to -1 D: pin_shutdownx set to -1 D: pin_spi_sck set to 18 D: pin_spi_miso set to 19 D: pin_spi_mosi set to 23 D: GPIO0 is HIGH D: GPIO2 is LOW, probably no PULL-UP D: GPIO4 is HIGH D: GPIO5 is HIGH D: GPIO12 is HIGH D: GPIO13 is HIGH D: GPIO14 is HIGH D: GPIO15 is HIGH D: GPIO16 is HIGH D: GPIO17 is HIGH D: GPIO18 is HIGH D: GPIO19 is LOW, probably no PULL-UP D: GPIO21 is HIGH D: GPIO22 is HIGH D: GPIO23 is HIGH D: GPIO25 is HIGH D: GPIO26 is HIGH D: GPIO27 is HIGH D: GPIO32 is HIGH D: GPIO33 is HIGH D: GPIO34 is LOW, probably no PULL-UP D: GPIO35 is HIGH D: GPIO39 is LOW, probably no PULL-UP D: gpio_00 will execute uppreset = 1 D: gpio_12 will execute upvolume = 2 D: gpio_13 will execute downvolume = 2 D: Start display D: Init Nextion, pins 16,17 D: Nextion command cls BLACK D: Nextion command page 0 D: Create list with acceptable WiFi networks D: Added LizardSquad to list of networks D: Added SSID2 to list of networks D: End adding networks D: Scan Networks D: Scan completed D: Number of available networks: 7 D: 1 - LizardSquad Signal: -50 dBm, Encryption WPA2_PSK, Acceptable

D: 2 - FRITZ!Box Gastzugang Signal: -50 dBm, Encryption WPA2_PSK

D: 3 - WLAN-3CUUSS Signal: -81 dBm, Encryption WPA2_PSK,

D: 4 - LizardSquad Signal: -87 dBm, Encryption WPA2_PSK, Acceptable

D: 5 - FRITZ!Box Gastzugang Signal: -88 dBm, Encryption WPA2_PSK,

D: 6 - Telekom_FON Signal: -90 dBm, Encryption OPEN,

D: 7 - WLAN-302402 Signal: -92 dBm, Encryption WPA2_PSK,

D: End of list D: Command: clk_dst with parameter 1 D: Command: clk_offset with parameter 1 D: Command: clk_server with parameter pool.ntp.org D: Command: gpio_00 with parameter uppreset = 1

D: Command: gpio_12 with parameter upvolume = 2 D: Command: gpio_13 with parameter downvolume = 2

D: Command: ir_40bf with parameter upvolume = 2 D: Command: ir_c03f with parameter downvolume = 2 D: Command: mqttbroker with parameter 192.168.178.45

D: Command: mqttpasswd with parameter *** D: Command: mqttport with parameter 1883 D: Command: mqttprefix with parameter none D: Command: mqttuser with parameter none D: Command: pin_tft_cs with parameter 15 D: Command: pin_tft_dc with parameter 2 D: Command: pin_vs_cs with parameter 32 D: Command: pin_vs_dcs with parameter 33 D: Command: pin_vs_dreq with parameter 35 D: Command: preset with parameter 6 D: Command: preset_00 with parameter 109.206.96.34:8100

D: Command: preset_01 with parameter airspectrum.cdnstream1.com:8114/1648_128 D: Command: preset_02 with parameter us2.internet-radio.com:8050

D: Command: preset_03 with parameter airspectrum.cdnstream1.com:8000/1261_192 D: Command: preset_04 with parameter airspectrum.cdnstream1.com:8008/1604_128 D: Command: preset_05 with parameter us1.internet-radio.com:8105

D: Command: preset_06 with parameter icecast.omroep.nl:80/radio1-bb-mp3 D: Command: preset_07 with parameter 205.164.62.15:10032

D: Command: preset_08 with parameter skonto.ls.lv:8002/mp3 D: Command: preset_09 with parameter 94.23.66.155:8106

D: Command: preset_10 with parameter ihr/IHR_IEDM D: Command: preset_11 with parameter ihr/IHR_TRAN

D: Command: toneha with parameter 0 D: Command: tonehf with parameter 0 D: Command: tonela with parameter 0 D: Command: tonelf with parameter 0 D: Command: volume with parameter 72 D: Slow SPI, Testing VS1053 read/write registers... D: Fast SPI, Testing VS1053 read/write registers again... D: endFillByte is 0 D: Connect to WiFi D: Connected to LizardSquad D: IP = 192.168.178.40 D: Nextion command page 1 D: Start server for commands D: Network found. Starting mqtt and OTA D: MQTT uses prefix P2FC4F5FC D: Init MQTT D: MDNS responder started D: Rotary encoder is disabled (-1/-1/-1) D: Sync TOD D: Sync TOD, new value is 22:08:16 D: STOP requested D: New preset/file requested (6/0) from icecast.omroep.nl:80/radio1-bb-mp3 D: Connect to new host icecast.omroep.nl:80/radio1-bb-mp3 D: Connect to icecast.omroep.nl on port 80, extension /radio1-bb-mp3 D: Song stopped correctly after 0 msec D: (Re)connecting number 1 to MQTT 192.168.178.45 D: Connected to server D: Duration mp3loop 1 D: Switch to HEADER D: Headerline: Content-Type: audio/mpeg D: audio/mpeg seen. D: Headerline: icy-br:192 D: Headerline: ice-audio-info: samplerate=48000;channels=2;bitrate=192 D: Headerline: icy-br:192 D: Headerline: icy-genre:Talk D: Headerline: icy-metadata:1 D: Headerline: icy-name:NPO Radio1 D: Headerline: icy-pub:0 D: Headerline: icy-url:http://www.radio1.nl D: Headerline: Server: Icecast 2.4.0-kh13 D: Headerline: Cache-Control: no-cache, no-store D: Headerline: Access-Control-Allow-Origin: * D: Headerline: Access-Control-Allow-Headers: Origin, Accept, X-Requested-With, Content-Type D: l-Allow-Headers: Origin, Accept, X-Requested-With, Content-Type seen. D: Headerline: Access-Control-Allow-Methods: GET, OPTIONS, HEAD D: Headerline: Connection: Close D: Headerline: Expires: Mon, 26 Jul 1997 05:00:00 GMT D: Headerline: icy-metaint:16000 D: Switch to DATA, bitrate is 192, metaint is 16000 D: Duration mp3loop 73 D: Nextion t0.txt="ESP32-Radio" D: Nextion t2.txt="NPO Radio1" D: Publish to topic P2FC4F5FC/ip : 192.168.178.40 D: Publish to topic P2FC4F5FC/icy/name : NPO Radio1 D: Publish to topic P2FC4F5FC/preset : 6 D: Duration mp3loop 312 D: Metadata block 64 bytes D: Streamtitle found, 61 bytes D: StreamTitle='NPO Radio 1 - Langs de Lijn En Omstreken - NOS'; D: Nextion t1.txt="NPO Radio 1\rLangs de Lijn En Omstreken - NOS" D: Publish to topic P2FC4F5FC/icy/streamtitle : NPO Radio 1 - Langs de Lijn En Omstreken - NOS D: Publish to topic P2FC4F5FC/playing : 1 D: Publish to topic P2FC4F5FC/volume : 72 `

[etscho1st]

No one any idea what can i try? Radio is working fine.

[Edzelf]

Your logging is hard to read. I had to insert newlines to read it. D: Init Nextion, pins 16,17 D: Nextion command cls BLACK D: Nextion command page 0 . D: Nextion command page 1 . D: Nextion t0.txt="ESP32-Radio" D: Nextion t2.txt="NPO Radio1" . D: Nextion t1.txt="NPO Radio 1\rLangs de Lijn En Omstreken - NOS"

So the commands to Serial 2 are generated.

Have you connect it to Serial 2 (RX2 TX2 pins)?

[etscho1st]

Hi again, i solved the problem. Had to write in the PreinitializeEvent bauds=9600. Now its working but habe now other trouble. I make a new post. Thx for trying to help