heishamon.yaml - #### SENSORS BELOW ARE NOT IN FIRMWARE ####, not working

[bse4792]

heishamon.yaml sensors are giving unknown see picture i have not changed anything in yaml file all others sensor/switches works perfectly

[trsqr]

You are using Home Assistant, right? I recently committed a change that should have fixed those. Did you pull the master recently or which version are you using (this would be helpful to mention in a bug report)?

[bse4792]

Hi. Yeah updated firmware and reset settings, pulled latest yaml file yesterday.

[trsqr]

Hi, currently on mobile, but try this:

Under #Energy use/production look at places where it says sensor.heishamon_blahblah and replace those with sensor.heishamon_aquarea_blahblah. So basically just add the aquarea into the variable names for the power consumption and production.

Let me know if it works and I'll commit the fix tomorrow when back home.

[MiG-41]

@trsqr , could you in the same time change pattern of MQTT topics , from "heishamon_heat_pump/" to "panasonic_heat_pump/" ? "panasonic_heat_pump" is still standard one , with heishamon gives ,and since it is not changed till that time it will probably stay longer....

[bse4792]

@trsqr i could not get it to work last night, could not find correct sensor.bla_bla_bla. also i agree with @MiG-41 on topics

[trsqr]

@bse4792 can you please test the yaml in: https://github.com/Egyras/HeishaMon/pull/159

[geduxas]

Also there was a problem, that COP is calculated before it get's energy values. Fixed that in future release.

https://github.com/Egyras/HeishaMon/commit/e0bf1e34d510de5b1e8166a065608f40e322c8de

For my HA with that YAML everything works fine now.

[trsqr]

@bse4792, please test and close this if ok.

[bse4792]

All fixed in 1.0