Closed Upperspace closed 2 years ago
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.***> skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA . You are receiving this because you are subscribed to this thread.Message ID: @.***>
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.***
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto:@.>> skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA . You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.>>
- Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006508102&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=s0hkd%2BdV0OfnqQMoNZ4v%2FUPppc3qVA4Q2Pj1ujlgW6I%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLKZSPUBKIESUMWEPM3UUV5NTANCNFSM5LLNWZDA&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=o7R2oB9tb0%2B0OLwYDqryKOLUyjKIO2J0AwyPJN2i5y0%3D&reserved=0. Triage notifications on the go with GitHub Mobile for iOShttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=EbMPe%2F0Wzt74dktfcYt7uE5y4L0OhtncdJpU%2FDIutK4%3D&reserved=0 or Androidhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=89Ot4x0kpcTd1S0MsNXI9PgXJHjVvFnStB0M8JYLKY4%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.***> skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.***
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto:@.>> skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.>>
- Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006508102&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=s0hkd%2BdV0OfnqQMoNZ4v%2FUPppc3qVA4Q2Pj1ujlgW6I%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLKZSPUBKIESUMWEPM3UUV5NTANCNFSM5LLNWZDA&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=o7R2oB9tb0%2B0OLwYDqryKOLUyjKIO2J0AwyPJN2i5y0%3D&reserved=0
. Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=EbMPe%2F0Wzt74dktfcYt7uE5y4L0OhtncdJpU%2FDIutK4%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=89Ot4x0kpcTd1S0MsNXI9PgXJHjVvFnStB0M8JYLKY4%3D&reserved=0 . You are receiving this because you authored the thread.Message ID: @.**@.>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.***>
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto:@.>> skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
- Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006508102&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=s0hkd%2BdV0OfnqQMoNZ4v%2FUPppc3qVA4Q2Pj1ujlgW6I%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLKZSPUBKIESUMWEPM3UUV5NTANCNFSM5LLNWZDA&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=o7R2oB9tb0%2B0OLwYDqryKOLUyjKIO2J0AwyPJN2i5y0%3D&reserved=0
. Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=EbMPe%2F0Wzt74dktfcYt7uE5y4L0OhtncdJpU%2FDIutK4%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=89Ot4x0kpcTd1S0MsNXI9PgXJHjVvFnStB0M8JYLKY4%3D&reserved=0 . You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.<mailto:@.>>
- Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006561324&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177218247%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=uC66A86GT13fF%2BxDM1XYaII4P1dH8N6PBdPz3MiiTvw%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLMKQ2324R42FN3MIG3UUWFSHANCNFSM5LLNWZDA&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177218247%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=QdIAJFSK29q1oGGWc2L6ZJcrufmB8ACNtmj7QigQw%2Fc%3D&reserved=0. Triage notifications on the go with GitHub Mobile for iOShttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177374029%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=6KBRuNYxpP1BA4DCHMmnn%2FAVm%2BrajrvmpcyqZ43LP6E%3D&reserved=0 or Androidhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177374029%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=o34s4s%2FjBuGor%2F6OZetlA%2B126q7oc%2FR2tBrI2v54HMc%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
Yes correct.
https://docs.microsoft.com/en-us/dotnet/standard/frameworks
In the above link possible framework names are listed.
Start with just building the base, familytreelibrary. Then add other modules.
Den tors 6 jan. 2022 13:56Upperspace @.***> skrev:
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto:@.>> skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.<mailto: @.%3cmailto:@.>>>
- Reply to this email directly, view it on GitHub<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
- Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.>>
- Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006561324&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177218247%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=uC66A86GT13fF%2BxDM1XYaII4P1dH8N6PBdPz3MiiTvw%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLMKQ2324R42FN3MIG3UUWFSHANCNFSM5LLNWZDA&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177218247%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=QdIAJFSK29q1oGGWc2L6ZJcrufmB8ACNtmj7QigQw%2Fc%3D&reserved=0
. Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177374029%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=6KBRuNYxpP1BA4DCHMmnn%2FAVm%2BrajrvmpcyqZ43LP6E%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177374029%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=o34s4s%2FjBuGor%2F6OZetlA%2B126q7oc%2FR2tBrI2v54HMc%3D&reserved=0 . You are receiving this because you authored the thread.Message ID: @.**@.>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006567871, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUFT2J6E3SUWGQUUT23UUWGRVANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.***>
By the way,
@.*** The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.>; Ekmansoft/FamilyTreeCodecText @.> A/c: Author @.***> Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.>> Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.>> A/c: Upperspace @.**@.>>; Author @.**@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto:@.>> skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
- Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006508102&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=s0hkd%2BdV0OfnqQMoNZ4v%2FUPppc3qVA4Q2Pj1ujlgW6I%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLKZSPUBKIESUMWEPM3UUV5NTANCNFSM5LLNWZDA&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=o7R2oB9tb0%2B0OLwYDqryKOLUyjKIO2J0AwyPJN2i5y0%3D&reserved=0
. Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=EbMPe%2F0Wzt74dktfcYt7uE5y4L0OhtncdJpU%2FDIutK4%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7Cefaace0a265b4126fda508d9d1092592%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770659472185218%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=89Ot4x0kpcTd1S0MsNXI9PgXJHjVvFnStB0M8JYLKY4%3D&reserved=0 . You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.<mailto:@.>>
- Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006561324&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177218247%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=uC66A86GT13fF%2BxDM1XYaII4P1dH8N6PBdPz3MiiTvw%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLMKQ2324R42FN3MIG3UUWFSHANCNFSM5LLNWZDA&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177218247%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=QdIAJFSK29q1oGGWc2L6ZJcrufmB8ACNtmj7QigQw%2Fc%3D&reserved=0. Triage notifications on the go with GitHub Mobile for iOShttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177374029%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=6KBRuNYxpP1BA4DCHMmnn%2FAVm%2BrajrvmpcyqZ43LP6E%3D&reserved=0 or Androidhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177374029%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=o34s4s%2FjBuGor%2F6OZetlA%2B126q7oc%2FR2tBrI2v54HMc%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.***> skrev:
By the way,
@.*** The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.>; Ekmansoft/FamilyTreeCodecText @.> A/c: Author @.***> Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.>> Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.>> A/c: Upperspace @.**@.>>; Author @.**@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto:@.>> skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.<mailto: @.%3cmailto:@.>>>
- Reply to this email directly, view it on GitHub<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
- Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.>>
- Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006561324&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177218247%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=uC66A86GT13fF%2BxDM1XYaII4P1dH8N6PBdPz3MiiTvw%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLMKQ2324R42FN3MIG3UUWFSHANCNFSM5LLNWZDA&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177218247%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=QdIAJFSK29q1oGGWc2L6ZJcrufmB8ACNtmj7QigQw%2Fc%3D&reserved=0
. Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177374029%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=6KBRuNYxpP1BA4DCHMmnn%2FAVm%2BrajrvmpcyqZ43LP6E%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177374029%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=o34s4s%2FjBuGor%2F6OZetlA%2B126q7oc%2FR2tBrI2v54HMc%3D&reserved=0 . You are receiving this because you authored the thread.Message ID: @.**@.>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.***>
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto:@.>> skrev:
By the way,
@.<mailto:@.> The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>>; Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Author @.<mailto:@.>> Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto:***@***.******@***.***>> Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto:***@***.******@***.***>> A/c: Upperspace @.**@.mailto:***@***.******@***.***>>; Author @.**@.mailto:***@***.******@***.***>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>> skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***>>>
- Reply to this email directly, view it on GitHub<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
- Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
- Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006561324&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177218247%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=uC66A86GT13fF%2BxDM1XYaII4P1dH8N6PBdPz3MiiTvw%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLMKQ2324R42FN3MIG3UUWFSHANCNFSM5LLNWZDA&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177218247%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=QdIAJFSK29q1oGGWc2L6ZJcrufmB8ACNtmj7QigQw%2Fc%3D&reserved=0
. Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177374029%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=6KBRuNYxpP1BA4DCHMmnn%2FAVm%2BrajrvmpcyqZ43LP6E%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177374029%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=o34s4s%2FjBuGor%2F6OZetlA%2B126q7oc%2FR2tBrI2v54HMc%3D&reserved=0 . You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006598543&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609630434%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=5EMSWnpXhqJL%2FyENbwGEo60FL%2Fdqi%2BwpQS70Eanz2Qs%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLJJFTOZADM5ZXRPPILUUWLKFANCNFSM5LLNWZDA&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=QfJhAaRtXNGDVCsREJigfOlmbb%2B9MKWapUyyfQ2THEQ%3D&reserved=0. Triage notifications on the go with GitHub Mobile for iOShttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=GburYr%2FrrGW16zhRv%2FvPiUG1%2Bq%2FNJtfDuaf7SOGmcD8%3D&reserved=0 or Androidhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=SW39rDm15Y4OigqodzMPgZS9tcSqekT0BB7V3EYUSXA%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
Good evening Kenneth,
I know that by now you are fed up with my requests, and I understand.
However, let me tell you this:
@.***
Unfortunately, after I try to log in, it brings a 404 (https://localhost:44380/Identity/Account/Register does not work)...
Thank you for your patience and help
Best regards!
Jaume Pujol-Busquets
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 15:46 Per a: Ekmansoft/FamilyTreeCodecText @.>; Ekmansoft/FamilyTreeCodecText @.> A/c: Author @.***> Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.**@.>> Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.**@.>> A/c: Upperspace @.**@.>>; Author @.**@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto:@.>> skrev:
By the way,
@.<mailto:@.> The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>>; Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Author @.<mailto:@.>> Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto:***@***.******@***.***>> Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto:***@***.******@***.***>> A/c: Upperspace @.**@.mailto:***@***.******@***.***>>; Author @.**@.mailto:***@***.******@***.***>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>> skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***>>>
- Reply to this email directly, view it on GitHub<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
- Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
- Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006561324&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177218247%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=uC66A86GT13fF%2BxDM1XYaII4P1dH8N6PBdPz3MiiTvw%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLMKQ2324R42FN3MIG3UUWFSHANCNFSM5LLNWZDA&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177218247%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=QdIAJFSK29q1oGGWc2L6ZJcrufmB8ACNtmj7QigQw%2Fc%3D&reserved=0
. Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177374029%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=6KBRuNYxpP1BA4DCHMmnn%2FAVm%2BrajrvmpcyqZ43LP6E%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C2bf8f99c8c6941ee2a5008d9d112db17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770701177374029%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=o34s4s%2FjBuGor%2F6OZetlA%2B126q7oc%2FR2tBrI2v54HMc%3D&reserved=0 . You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006598543&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609630434%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=5EMSWnpXhqJL%2FyENbwGEo60FL%2Fdqi%2BwpQS70Eanz2Qs%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLJJFTOZADM5ZXRPPILUUWLKFANCNFSM5LLNWZDA&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=QfJhAaRtXNGDVCsREJigfOlmbb%2B9MKWapUyyfQ2THEQ%3D&reserved=0. Triage notifications on the go with GitHub Mobile for iOShttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=GburYr%2FrrGW16zhRv%2FvPiUG1%2Bq%2FNJtfDuaf7SOGmcD8%3D&reserved=0 or Androidhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=SW39rDm15Y4OigqodzMPgZS9tcSqekT0BB7V3EYUSXA%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
The only thing I can think of is you have to change the dotnet version in all csproj files
Den tors 6 jan. 2022 15:46Upperspace @.***> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto:@.>> skrev:
By the way,
@.<mailto:@.> The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>>; Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Author @.<mailto:@.>> Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto:***@***.******@***.***>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto:***@***.******@***.***>>
A/c: Upperspace @.**@.mailto:***@***.******@***.***>>; Author @.**@.mailto:***@***.******@***.***>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006598543&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609630434%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=5EMSWnpXhqJL%2FyENbwGEo60FL%2Fdqi%2BwpQS70Eanz2Qs%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLJJFTOZADM5ZXRPPILUUWLKFANCNFSM5LLNWZDA&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=QfJhAaRtXNGDVCsREJigfOlmbb%2B9MKWapUyyfQ2THEQ%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=GburYr%2FrrGW16zhRv%2FvPiUG1%2Bq%2FNJtfDuaf7SOGmcD8%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=SW39rDm15Y4OigqodzMPgZS9tcSqekT0BB7V3EYUSXA%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.**@.>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.***>
By the way how are you building the project? If you build from Windows upgrading to visual studio 2022 might solve your problems.
Den tors 6 jan. 2022 15:46Upperspace @.***> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto:@.>> skrev:
By the way,
@.<mailto:@.> The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>>; Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Author @.<mailto:@.>> Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto:***@***.******@***.***>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto:***@***.******@***.***>>
A/c: Upperspace @.**@.mailto:***@***.******@***.***>>; Author @.**@.mailto:***@***.******@***.***>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006598543&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609630434%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=5EMSWnpXhqJL%2FyENbwGEo60FL%2Fdqi%2BwpQS70Eanz2Qs%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLJJFTOZADM5ZXRPPILUUWLKFANCNFSM5LLNWZDA&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=QfJhAaRtXNGDVCsREJigfOlmbb%2B9MKWapUyyfQ2THEQ%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=GburYr%2FrrGW16zhRv%2FvPiUG1%2Bq%2FNJtfDuaf7SOGmcD8%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=SW39rDm15Y4OigqodzMPgZS9tcSqekT0BB7V3EYUSXA%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.**@.>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.***>
Good evening Kenneth,
Again, thank you very much for your support!
I am Building with VS 2019.
Do you recommend going to 2022? I am a little scared of side efects. I have a productive, amateur web site on genealogy, and I fear it would “destroy” everything. Bear in mind that I have everything in Winforms (geneanet.cat, it’s all in Catalan, but just for you to check that I really have something live ! 😊) Please be indulgent as I am not a professional programmer. I do this in my spare time
Right now, I was trying to see what would be the minimal set to have a loadGedcom and a buildGedcom funcions from your code.
I see that you have precisely two funcions which seem to have that purpose, but I don’t know if I will be able to load them... Your software looks very, very professional, with many good idees, like the tree comparison... hope I can make it.!
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 19:20 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
By the way how are you building the project? If you build from Windows upgrading to visual studio 2022 might solve your problems.
Den tors 6 jan. 2022 15:46Upperspace @.<mailto:@.>> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> skrev:
By the way,
@.<mailto:@.mailto:***@***.***%3cmailto:***@***.***> The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Ekmansoft/FamilyTreeCodecText @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> A/c: Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
A/c: Upperspace @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>; Author @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>> skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006598543&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609630434%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=5EMSWnpXhqJL%2FyENbwGEo60FL%2Fdqi%2BwpQS70Eanz2Qs%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLJJFTOZADM5ZXRPPILUUWLKFANCNFSM5LLNWZDA&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=QfJhAaRtXNGDVCsREJigfOlmbb%2B9MKWapUyyfQ2THEQ%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=GburYr%2FrrGW16zhRv%2FvPiUG1%2Bq%2FNJtfDuaf7SOGmcD8%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C524394513c7d43ddb87c08d9d119b4d9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770730609786652%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=SW39rDm15Y4OigqodzMPgZS9tcSqekT0BB7V3EYUSXA%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006811963&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=589eUwAdrUib%2FP2wLFVpHw5POTS3Q6eA3t3fy72UlRg%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLOGNQASFESIIKUBSFTUUXMN3ANCNFSM5LLNWZDA&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=HBmt5Tg40iZ5ijDvboft6DdxoZBTfFaXspiTs3VINsg%3D&reserved=0. Triage notifications on the go with GitHub Mobile for iOShttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=NxTUV8yYnHKvxvtr1NRSzcRYvPF4kbop12mXQtLyrr0%3D&reserved=0 or Androidhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=ji67YefGTIIRrzq4f8AytbBXT2MCuZ5EZ4EaJHrEmTk%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
You can still keep your older visual studio even if you install the 2022 version so yes I recommend it
Den tors 6 jan. 2022 20:01Upperspace @.***> skrev:
Good evening Kenneth,
Again, thank you very much for your support!
I am Building with VS 2019.
Do you recommend going to 2022? I am a little scared of side efects. I have a productive, amateur web site on genealogy, and I fear it would “destroy” everything. Bear in mind that I have everything in Winforms ( geneanet.cat, it’s all in Catalan, but just for you to check that I really have something live ! 😊) Please be indulgent as I am not a professional programmer. I do this in my spare time
Right now, I was trying to see what would be the minimal set to have a loadGedcom and a buildGedcom funcions from your code.
I see that you have precisely two funcions which seem to have that purpose, but I don’t know if I will be able to load them... Your software looks very, very professional, with many good idees, like the tree comparison... hope I can make it.!
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 19:20 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
By the way how are you building the project? If you build from Windows upgrading to visual studio 2022 might solve your problems.
Den tors 6 jan. 2022 15:46Upperspace @.<mailto:@.>> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> skrev:
By the way,
@.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>
The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>>; Ekmansoft/FamilyTreeCodecText @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
A/c: Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.<mailto: @.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.<mailto: @.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
A/c: Upperspace @.**@.<mailto: @.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>;
Author @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>
skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>
A/c: Upperspace @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>;
Author
@.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto: @.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.<mailto<mailto: @.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.<mailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006811963&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=589eUwAdrUib%2FP2wLFVpHw5POTS3Q6eA3t3fy72UlRg%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLOGNQASFESIIKUBSFTUUXMN3ANCNFSM5LLNWZDA&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=HBmt5Tg40iZ5ijDvboft6DdxoZBTfFaXspiTs3VINsg%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=NxTUV8yYnHKvxvtr1NRSzcRYvPF4kbop12mXQtLyrr0%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=ji67YefGTIIRrzq4f8AytbBXT2MCuZ5EZ4EaJHrEmTk%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.**@.>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006840107, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUDY6ZLZTDZ5IETEVQDUUXRJRANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.***>
Good morning Kenneth,
Following your suggestion, I am now in VS 2022! 😊 Looks good!
I started over the whole process, but only with the three libràries that I see as necessary for my objective:
TreeFamilyLibrary TreeFamilyCodecGedcom TreefamilyTools
Eveything seems smooth, but... on the latest two, it is giving me this error:
Severity Code Description Project File Line Suppression State Error NU1105 Unable to find project information for 'C:\Users\jpujo\OneDrive\Documents\La meva programació\GEDCOM llibreries\FamilyTreeLibrary\FamilyTreeLibrary.csproj'. If you are using Visual Studio, this may be because the project is unloaded or not part of the current solution so run a restore from the command-line. Otherwise, the project file may be invalid or missing targets required for restore. FamilyTreeTools C:\Users\jpujo\OneDrive\Documents\La meva programació\GEDCOM llibreries\FamilyTreeTools\FamilyTreeTools.csproj 1
I haven’t touched anything from the initial installation
I don’t find this “restore” command. I have tried in all Command tools, to no avail. Do you know what is the problema and how to fix it?
Thanks in advance
Jaume Pujol-Busquets
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 20:49 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You can still keep your older visual studio even if you install the 2022 version so yes I recommend it
Den tors 6 jan. 2022 20:01Upperspace @.<mailto:@.>> skrev:
Good evening Kenneth,
Again, thank you very much for your support!
I am Building with VS 2019.
Do you recommend going to 2022? I am a little scared of side efects. I have a productive, amateur web site on genealogy, and I fear it would “destroy” everything. Bear in mind that I have everything in Winforms ( geneanet.cat, it’s all in Catalan, but just for you to check that I really have something live ! 😊) Please be indulgent as I am not a professional programmer. I do this in my spare time
Right now, I was trying to see what would be the minimal set to have a loadGedcom and a buildGedcom funcions from your code.
I see that you have precisely two funcions which seem to have that purpose, but I don’t know if I will be able to load them... Your software looks very, very professional, with many good idees, like the tree comparison... hope I can make it.!
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 19:20 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
By the way how are you building the project? If you build from Windows upgrading to visual studio 2022 might solve your problems.
Den tors 6 jan. 2022 15:46Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>> skrev:
By the way,
@.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>
The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>; Ekmansoft/FamilyTreeCodecText @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
A/c: Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
A/c: Upperspace @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>;
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto<mailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
A/c: Upperspace @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>;
Author
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>: @.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.>>>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto: @.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006811963&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=589eUwAdrUib%2FP2wLFVpHw5POTS3Q6eA3t3fy72UlRg%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLOGNQASFESIIKUBSFTUUXMN3ANCNFSM5LLNWZDA&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=HBmt5Tg40iZ5ijDvboft6DdxoZBTfFaXspiTs3VINsg%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=NxTUV8yYnHKvxvtr1NRSzcRYvPF4kbop12mXQtLyrr0%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=ji67YefGTIIRrzq4f8AytbBXT2MCuZ5EZ4EaJHrEmTk%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006840107, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUDY6ZLZTDZ5IETEVQDUUXRJRANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006887585&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=hq4M%2F6KI2yk1OTofoL8R4e8Bn40m71pdFTNuPQYYNCE%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLOLJI7LQ4ZLFJQAESDUUXW37ANCNFSM5LLNWZDA&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=gG6vOrtTtWPy5xPbD3WvcIfm9JYEz4fPc99r%2BliyPjw%3D&reserved=0. Triage notifications on the go with GitHub Mobile for iOShttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=MEb%2FYOPoAee6338V%2FQ%2F%2BYY6WU1PMM0osdgJqZRRw3O4%3D&reserved=0 or Androidhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=0nrc4TDQoCoTCUfs6vRjkJKiRRFG%2BMQn%2Fcvnya4Sa7Q%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
Hi,
I suggest you crate a VS solution, (.sln file) with all three projects loaded in VisualStudio, and it should work I think..
Den fre 7 jan. 2022 kl 12:10 skrev Upperspace @.***>:
Good morning Kenneth,
Following your suggestion, I am now in VS 2022! 😊 Looks good!
I started over the whole process, but only with the three libràries that I see as necessary for my objective:
TreeFamilyLibrary TreeFamilyCodecGedcom TreefamilyTools
Eveything seems smooth, but... on the latest two, it is giving me this error:
Severity Code Description Project File Line Suppression State Error NU1105 Unable to find project information for 'C:\Users\jpujo\OneDrive\Documents\La meva programació\GEDCOM llibreries\FamilyTreeLibrary\FamilyTreeLibrary.csproj'. If you are using Visual Studio, this may be because the project is unloaded or not part of the current solution so run a restore from the command-line. Otherwise, the project file may be invalid or missing targets required for restore. FamilyTreeTools C:\Users\jpujo\OneDrive\Documents\La meva programació\GEDCOM llibreries\FamilyTreeTools\FamilyTreeTools.csproj 1
I haven’t touched anything from the initial installation
I don’t find this “restore” command. I have tried in all Command tools, to no avail. Do you know what is the problema and how to fix it?
Thanks in advance
Jaume Pujol-Busquets
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 20:49 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You can still keep your older visual studio even if you install the 2022 version so yes I recommend it
Den tors 6 jan. 2022 20:01Upperspace @.<mailto:@.>> skrev:
Good evening Kenneth,
Again, thank you very much for your support!
I am Building with VS 2019.
Do you recommend going to 2022? I am a little scared of side efects. I have a productive, amateur web site on genealogy, and I fear it would “destroy” everything. Bear in mind that I have everything in Winforms ( geneanet.cat, it’s all in Catalan, but just for you to check that I really have something live ! 😊) Please be indulgent as I am not a professional programmer. I do this in my spare time
Right now, I was trying to see what would be the minimal set to have a loadGedcom and a buildGedcom funcions from your code.
I see that you have precisely two funcions which seem to have that purpose, but I don’t know if I will be able to load them... Your software looks very, very professional, with many good idees, like the tree comparison... hope I can make it.!
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 19:20 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
By the way how are you building the project? If you build from Windows upgrading to visual studio 2022 might solve your problems.
Den tors 6 jan. 2022 15:46Upperspace @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>
skrev:
By the way,
@.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>
The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>;
Ekmansoft/FamilyTreeCodecText @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
A/c: Author @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto<mailto:***@***.******@***.***%3cmailto:
@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
A/c: Upperspace @.**@.mailto<mailto:***@***.******@***.***%3cmailto:
@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>;
Author @.**@.<mailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto<mailto: @.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto: @.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
A/c: Upperspace @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>;
Author
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto<mailto: @.%3cmailto%3cmailto:@.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>:
@.%3cmailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.>>>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:
@.%3cmailto:@.%3cmailto<mailto: @.%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.<mailto: @.**@.mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:
@.**@.%3cmailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.%3cmailto:@.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.<mailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006840107>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUDY6ZLZTDZ5IETEVQDUUXRJRANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006887585&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=hq4M%2F6KI2yk1OTofoL8R4e8Bn40m71pdFTNuPQYYNCE%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLOLJI7LQ4ZLFJQAESDUUXW37ANCNFSM5LLNWZDA&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=gG6vOrtTtWPy5xPbD3WvcIfm9JYEz4fPc99r%2BliyPjw%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=MEb%2FYOPoAee6338V%2FQ%2F%2BYY6WU1PMM0osdgJqZRRw3O4%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=0nrc4TDQoCoTCUfs6vRjkJKiRRFG%2BMQn%2Fcvnya4Sa7Q%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.**@.>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1007325929, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUDYN4G2FEQ3IWZTWI3UU3C23ANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.***>
You may need to set a dependency from the codec and tools projects towards the FamilyTreeLibrary project...
Den fre 7 jan. 2022 kl 12:27 skrev Kenneth Ekman @.***>:
Hi,
I suggest you crate a VS solution, (.sln file) with all three projects loaded in VisualStudio, and it should work I think..
Den fre 7 jan. 2022 kl 12:10 skrev Upperspace @.***>:
Good morning Kenneth,
Following your suggestion, I am now in VS 2022! 😊 Looks good!
I started over the whole process, but only with the three libràries that I see as necessary for my objective:
TreeFamilyLibrary TreeFamilyCodecGedcom TreefamilyTools
Eveything seems smooth, but... on the latest two, it is giving me this error:
Severity Code Description Project File Line Suppression State Error NU1105 Unable to find project information for 'C:\Users\jpujo\OneDrive\Documents\La meva programació\GEDCOM llibreries\FamilyTreeLibrary\FamilyTreeLibrary.csproj'. If you are using Visual Studio, this may be because the project is unloaded or not part of the current solution so run a restore from the command-line. Otherwise, the project file may be invalid or missing targets required for restore. FamilyTreeTools C:\Users\jpujo\OneDrive\Documents\La meva programació\GEDCOM llibreries\FamilyTreeTools\FamilyTreeTools.csproj 1
I haven’t touched anything from the initial installation
I don’t find this “restore” command. I have tried in all Command tools, to no avail. Do you know what is the problema and how to fix it?
Thanks in advance
Jaume Pujol-Busquets
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 20:49 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You can still keep your older visual studio even if you install the 2022 version so yes I recommend it
Den tors 6 jan. 2022 20:01Upperspace @.<mailto:@.>> skrev:
Good evening Kenneth,
Again, thank you very much for your support!
I am Building with VS 2019.
Do you recommend going to 2022? I am a little scared of side efects. I have a productive, amateur web site on genealogy, and I fear it would “destroy” everything. Bear in mind that I have everything in Winforms ( geneanet.cat, it’s all in Catalan, but just for you to check that I really have something live ! 😊) Please be indulgent as I am not a professional programmer. I do this in my spare time
Right now, I was trying to see what would be the minimal set to have a loadGedcom and a buildGedcom funcions from your code.
I see that you have precisely two funcions which seem to have that purpose, but I don’t know if I will be able to load them... Your software looks very, very professional, with many good idees, like the tree comparison... hope I can make it.!
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 19:20 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
By the way how are you building the project? If you build from Windows upgrading to visual studio 2022 might solve your problems.
Den tors 6 jan. 2022 15:46Upperspace @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>
skrev:
By the way,
@.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>
The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>;
Ekmansoft/FamilyTreeCodecText @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
A/c: Author @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto<mailto:***@***.******@***.***%3cmailto:
@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
A/c: Upperspace @.**@.mailto<mailto:***@***.******@***.***%3cmailto:
@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>;
Author @.**@.<mailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto<mailto: @.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto: @.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
A/c: Upperspace @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>;
Author
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto<mailto: @.%3cmailto%3cmailto:@.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>:
@.%3cmailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.>>>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:
@.%3cmailto:@.%3cmailto<mailto: @.%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.<mailto: @.**@.mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:
@.**@.%3cmailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.%3cmailto:@.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.<mailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006840107>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUDY6ZLZTDZ5IETEVQDUUXRJRANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006887585&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=hq4M%2F6KI2yk1OTofoL8R4e8Bn40m71pdFTNuPQYYNCE%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLOLJI7LQ4ZLFJQAESDUUXW37ANCNFSM5LLNWZDA&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=gG6vOrtTtWPy5xPbD3WvcIfm9JYEz4fPc99r%2BliyPjw%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=MEb%2FYOPoAee6338V%2FQ%2F%2BYY6WU1PMM0osdgJqZRRw3O4%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=0nrc4TDQoCoTCUfs6vRjkJKiRRFG%2BMQn%2Fcvnya4Sa7Q%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.**@.>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1007325929, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUDYN4G2FEQ3IWZTWI3UU3C23ANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.***>
Dear Kenneth,
I have created a project and I have referenced the three dll created under debug
How can I see a definition of the funcions to be called, or the data types/classes that I shoud use?
I am looking for something like
FamilyTreeLibrary.FamilyTreeStore tree = new FamilyTreeLibrary.FamilyTreeStore();
In this case, it is giving me an error because it says they are namespaces not calsses...
Thanks very much!
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 20:49 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You can still keep your older visual studio even if you install the 2022 version so yes I recommend it
Den tors 6 jan. 2022 20:01Upperspace @.<mailto:@.>> skrev:
Good evening Kenneth,
Again, thank you very much for your support!
I am Building with VS 2019.
Do you recommend going to 2022? I am a little scared of side efects. I have a productive, amateur web site on genealogy, and I fear it would “destroy” everything. Bear in mind that I have everything in Winforms ( geneanet.cat, it’s all in Catalan, but just for you to check that I really have something live ! 😊) Please be indulgent as I am not a professional programmer. I do this in my spare time
Right now, I was trying to see what would be the minimal set to have a loadGedcom and a buildGedcom funcions from your code.
I see that you have precisely two funcions which seem to have that purpose, but I don’t know if I will be able to load them... Your software looks very, very professional, with many good idees, like the tree comparison... hope I can make it.!
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 19:20 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
By the way how are you building the project? If you build from Windows upgrading to visual studio 2022 might solve your problems.
Den tors 6 jan. 2022 15:46Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>> skrev:
By the way,
@.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>
The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>; Ekmansoft/FamilyTreeCodecText @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
A/c: Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
A/c: Upperspace @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>;
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto<mailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
A/c: Upperspace @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>;
Author
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>: @.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.>>>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto: @.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006811963&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=589eUwAdrUib%2FP2wLFVpHw5POTS3Q6eA3t3fy72UlRg%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLOGNQASFESIIKUBSFTUUXMN3ANCNFSM5LLNWZDA&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=HBmt5Tg40iZ5ijDvboft6DdxoZBTfFaXspiTs3VINsg%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=NxTUV8yYnHKvxvtr1NRSzcRYvPF4kbop12mXQtLyrr0%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C89e8340a7d314cd7a70008d9d1412ea1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770900155251252%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=ji67YefGTIIRrzq4f8AytbBXT2MCuZ5EZ4EaJHrEmTk%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006840107, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUDY6ZLZTDZ5IETEVQDUUXRJRANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006887585&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=hq4M%2F6KI2yk1OTofoL8R4e8Bn40m71pdFTNuPQYYNCE%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLOLJI7LQ4ZLFJQAESDUUXW37ANCNFSM5LLNWZDA&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=gG6vOrtTtWPy5xPbD3WvcIfm9JYEz4fPc99r%2BliyPjw%3D&reserved=0. Triage notifications on the go with GitHub Mobile for iOShttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=MEb%2FYOPoAee6338V%2FQ%2F%2BYY6WU1PMM0osdgJqZRRw3O4%3D&reserved=0 or Androidhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=0nrc4TDQoCoTCUfs6vRjkJKiRRFG%2BMQn%2Fcvnya4Sa7Q%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
Everything is available in the .cs files.
You can see all interfaces in the .cs files.
Some usage examples can be found here
https://github.com/Ekmansoft/FamilyTreeWebTools/blob/master/Services/FamilyWebTree.cs
Den fre 7 jan. 2022 kl 13:46 skrev Upperspace @.***>:
Dear Kenneth,
I have created a project and I have referenced the three dll created under debug
How can I see a definition of the funcions to be called, or the data types/classes that I shoud use?
I am looking for something like
FamilyTreeLibrary.FamilyTreeStore tree = new FamilyTreeLibrary.FamilyTreeStore();
In this case, it is giving me an error because it says they are namespaces not calsses...
Thanks very much!
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 20:49 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You can still keep your older visual studio even if you install the 2022 version so yes I recommend it
Den tors 6 jan. 2022 20:01Upperspace @.<mailto:@.>> skrev:
Good evening Kenneth,
Again, thank you very much for your support!
I am Building with VS 2019.
Do you recommend going to 2022? I am a little scared of side efects. I have a productive, amateur web site on genealogy, and I fear it would “destroy” everything. Bear in mind that I have everything in Winforms ( geneanet.cat, it’s all in Catalan, but just for you to check that I really have something live ! 😊) Please be indulgent as I am not a professional programmer. I do this in my spare time
Right now, I was trying to see what would be the minimal set to have a loadGedcom and a buildGedcom funcions from your code.
I see that you have precisely two funcions which seem to have that purpose, but I don’t know if I will be able to load them... Your software looks very, very professional, with many good idees, like the tree comparison... hope I can make it.!
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 19:20 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
By the way how are you building the project? If you build from Windows upgrading to visual studio 2022 might solve your problems.
Den tors 6 jan. 2022 15:46Upperspace @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>
skrev:
By the way,
@.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>
The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>;
Ekmansoft/FamilyTreeCodecText @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
A/c: Author @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto<mailto:***@***.******@***.***%3cmailto:
@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
A/c: Upperspace @.**@.mailto<mailto:***@***.******@***.***%3cmailto:
@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>;
Author @.**@.<mailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto<mailto: @.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto: @.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
A/c: Upperspace @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>;
Author
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto<mailto: @.%3cmailto%3cmailto:@.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>:
@.%3cmailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.>>>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:
@.%3cmailto:@.%3cmailto<mailto: @.%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.<mailto: @.**@.mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:
@.**@.%3cmailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.%3cmailto:@.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.<mailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006840107>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUDY6ZLZTDZ5IETEVQDUUXRJRANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006887585&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=hq4M%2F6KI2yk1OTofoL8R4e8Bn40m71pdFTNuPQYYNCE%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLOLJI7LQ4ZLFJQAESDUUXW37ANCNFSM5LLNWZDA&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=gG6vOrtTtWPy5xPbD3WvcIfm9JYEz4fPc99r%2BliyPjw%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=MEb%2FYOPoAee6338V%2FQ%2F%2BYY6WU1PMM0osdgJqZRRw3O4%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=0nrc4TDQoCoTCUfs6vRjkJKiRRFG%2BMQn%2Fcvnya4Sa7Q%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.**@.>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1007380701, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUDJ3SF6X3V7C3V7ZD3UU3ODVANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.***>
Hi Kenneth,
Please let me beg you some help as I think I have screwed all my last two years work with some idiotic execution of git
Is there a command that I can execute to recover from last instruction in GIT (and if so, how)??
Thank you very much for your help, and sorry as in this moment I don’t know who to turn to
Thanks in advance
Jaume
De: Kenneth Ekman @.> Enviat: divendres, 7 de gener de 2022 13:56 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Everything is available in the .cs files.
You can see all interfaces in the .cs files.
Some usage examples can be found here
https://github.com/Ekmansoft/FamilyTreeWebTools/blob/master/Services/FamilyWebTree.cs
Den fre 7 jan. 2022 kl 13:46 skrev Upperspace @.***>:
Dear Kenneth,
I have created a project and I have referenced the three dll created under debug
How can I see a definition of the funcions to be called, or the data types/classes that I shoud use?
I am looking for something like
FamilyTreeLibrary.FamilyTreeStore tree = new FamilyTreeLibrary.FamilyTreeStore();
In this case, it is giving me an error because it says they are namespaces not calsses...
Thanks very much!
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 20:49 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You can still keep your older visual studio even if you install the 2022 version so yes I recommend it
Den tors 6 jan. 2022 20:01Upperspace @.<mailto:@.>> skrev:
Good evening Kenneth,
Again, thank you very much for your support!
I am Building with VS 2019.
Do you recommend going to 2022? I am a little scared of side efects. I have a productive, amateur web site on genealogy, and I fear it would “destroy” everything. Bear in mind that I have everything in Winforms ( geneanet.cat, it’s all in Catalan, but just for you to check that I really have something live ! 😊) Please be indulgent as I am not a professional programmer. I do this in my spare time
Right now, I was trying to see what would be the minimal set to have a loadGedcom and a buildGedcom funcions from your code.
I see that you have precisely two funcions which seem to have that purpose, but I don’t know if I will be able to load them... Your software looks very, very professional, with many good idees, like the tree comparison... hope I can make it.!
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 19:20 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
By the way how are you building the project? If you build from Windows upgrading to visual studio 2022 might solve your problems.
Den tors 6 jan. 2022 15:46Upperspace @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>
skrev:
By the way,
@.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>
The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>;
Ekmansoft/FamilyTreeCodecText @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
A/c: Author @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto<mailto:***@***.******@***.***%3cmailto:
@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
A/c: Upperspace @.**@.mailto<mailto:***@***.******@***.***%3cmailto:
@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>;
Author @.**@.<mailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto<mailto: @.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto: @.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
A/c: Upperspace @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>;
Author
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto<mailto: @.%3cmailto%3cmailto:@.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>:
@.%3cmailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.>>>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:
@.%3cmailto:@.%3cmailto<mailto: @.%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.<mailto: @.**@.mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:
@.**@.%3cmailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.%3cmailto:@.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.<mailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006840107>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUDY6ZLZTDZ5IETEVQDUUXRJRANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1006887585&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=hq4M%2F6KI2yk1OTofoL8R4e8Bn40m71pdFTNuPQYYNCE%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLOLJI7LQ4ZLFJQAESDUUXW37ANCNFSM5LLNWZDA&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=gG6vOrtTtWPy5xPbD3WvcIfm9JYEz4fPc99r%2BliyPjw%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=MEb%2FYOPoAee6338V%2FQ%2F%2BYY6WU1PMM0osdgJqZRRw3O4%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C2171d62aa19f4b70557c08d9d14da12a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637770953614106149%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=0nrc4TDQoCoTCUfs6vRjkJKiRRFG%2BMQn%2Fcvnya4Sa7Q%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.**@.>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1007380701, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUDJ3SF6X3V7C3V7ZD3UU3ODVANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.***>
— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1007385817&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=1VN1GlX%2Bsc5jIOOoI0KC8gSqPCDd%2FZii6Ol1xzy5jIU%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLO3AWIJRGPL55ZNZNLUU3PFNANCNFSM5LLNWZDA&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=HmwJuHr0KHhrwO2AZrKo8nv0M9f%2FDRTi2xrlVO%2FUGEk%3D&reserved=0. Triage notifications on the go with GitHub Mobile for iOShttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=jlzceecZAUHXsXuKm4BQ3UScDynM4NRADquRiniTuQk%3D&reserved=0 or Androidhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=CpkVyWqsxhytgN1wFQDUmpQ%2FwZchDVExGjwLt5ViWjY%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.***>
Hmm. Sounds dangerous.
Check with gitk --all
Or Gil Lola
Den fre 7 jan. 2022 20:22Upperspace @.***> skrev:
Hi Kenneth,
Please let me beg you some help as I think I have screwed all my last two years work with some idiotic execution of git
Is there a command that I can execute to recover from last instruction in GIT (and if so, how)??
Thank you very much for your help, and sorry as in this moment I don’t know who to turn to
Thanks in advance
Jaume
De: Kenneth Ekman @.> Enviat: divendres, 7 de gener de 2022 13:56 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Everything is available in the .cs files.
You can see all interfaces in the .cs files.
Some usage examples can be found here
https://github.com/Ekmansoft/FamilyTreeWebTools/blob/master/Services/FamilyWebTree.cs
Den fre 7 jan. 2022 kl 13:46 skrev Upperspace @.***>:
Dear Kenneth,
I have created a project and I have referenced the three dll created under debug
How can I see a definition of the funcions to be called, or the data types/classes that I shoud use?
I am looking for something like
FamilyTreeLibrary.FamilyTreeStore tree = new FamilyTreeLibrary.FamilyTreeStore();
In this case, it is giving me an error because it says they are namespaces not calsses...
Thanks very much!
De: Kenneth Ekman @.> Enviat: dijous, 6 de gener de 2022 20:49 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You can still keep your older visual studio even if you install the 2022 version so yes I recommend it
Den tors 6 jan. 2022 20:01Upperspace @.<mailto:@.>> skrev:
Good evening Kenneth,
Again, thank you very much for your support!
I am Building with VS 2019.
Do you recommend going to 2022? I am a little scared of side efects. I have a productive, amateur web site on genealogy, and I fear it would “destroy” everything. Bear in mind that I have everything in Winforms ( geneanet.cat, it’s all in Catalan, but just for you to check that I really have something live ! 😊) Please be indulgent as I am not a professional programmer. I do this in my spare time
Right now, I was trying to see what would be the minimal set to have a loadGedcom and a buildGedcom funcions from your code.
I see that you have precisely two funcions which seem to have that purpose, but I don’t know if I will be able to load them... Your software looks very, very professional, with many good idees, like the tree comparison... hope I can make it.!
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 19:20 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
By the way how are you building the project? If you build from Windows upgrading to visual studio 2022 might solve your problems.
Den tors 6 jan. 2022 15:46Upperspace @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto: @.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>;
Author
@.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>
skrev:
By the way,
@.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>
The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>>;
Ekmansoft/FamilyTreeCodecText @.<mailto: @.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
A/c: Author @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto<mailto:***@***.******@***.***%3cmailto:
@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
A/c: Upperspace @.**@.mailto<mailto:***@***.******@***.***%3cmailto:
@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>;
Author @.**@.<mailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto<mailto: @.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto: @.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto: @.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
A/c: Upperspace @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>;
Author
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto<mailto: @.%3cmailto%3cmailto:@.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>:
@.%3cmailto:@.%3cmailto:@.***<mailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:
@.%3cmailto:@.%3cmailto<mailto:
@.%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.<mailto: @.**@.mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:
@.**@.%3cmailto:@.**@.<mailto:
@.**@.%3cmailto:@.**@.%3cmailto:@.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.<mailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.<mailto:@.**@.<mailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.<mailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006840107>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDY6ZLZTDZ5IETEVQDUUXRJRANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1007380701>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUDJ3SF6X3V7C3V7ZD3UU3ODVANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.***>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1007385817&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=1VN1GlX%2Bsc5jIOOoI0KC8gSqPCDd%2FZii6Ol1xzy5jIU%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLO3AWIJRGPL55ZNZNLUU3PFNANCNFSM5LLNWZDA&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=HmwJuHr0KHhrwO2AZrKo8nv0M9f%2FDRTi2xrlVO%2FUGEk%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=jlzceecZAUHXsXuKm4BQ3UScDynM4NRADquRiniTuQk%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=CpkVyWqsxhytgN1wFQDUmpQ%2FwZchDVExGjwLt5ViWjY%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1007674387, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUFAU2IZF6P3TA2MQSDUU44PJANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.***>
Hi Kenneth,
I’m sweating in despair...
How do I execute gitk –all?? I opened a cmd terminal and it does not recognizes this command
Thanks!
De: Kenneth Ekman @.> Enviat: divendres, 7 de gener de 2022 21:05 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Hmm. Sounds dangerous.
Check with gitk --all
Or Gil Lola
Den fre 7 jan. 2022 20:22Upperspace @.<mailto:@.>> skrev:
Hi Kenneth,
Please let me beg you some help as I think I have screwed all my last two years work with some idiotic execution of git
Is there a command that I can execute to recover from last instruction in GIT (and if so, how)??
Thank you very much for your help, and sorry as in this moment I don’t know who to turn to
Thanks in advance
Jaume
De: Kenneth Ekman @.<mailto:@.>> Enviat: divendres, 7 de gener de 2022 13:56 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Everything is available in the .cs files.
You can see all interfaces in the .cs files.
Some usage examples can be found here
https://github.com/Ekmansoft/FamilyTreeWebTools/blob/master/Services/FamilyWebTree.cs
Den fre 7 jan. 2022 kl 13:46 skrev Upperspace @.<mailto:@.>>:
Dear Kenneth,
I have created a project and I have referenced the three dll created under debug
How can I see a definition of the funcions to be called, or the data types/classes that I shoud use?
I am looking for something like
FamilyTreeLibrary.FamilyTreeStore tree = new FamilyTreeLibrary.FamilyTreeStore();
In this case, it is giving me an error because it says they are namespaces not calsses...
Thanks very much!
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 20:49 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You can still keep your older visual studio even if you install the 2022 version so yes I recommend it
Den tors 6 jan. 2022 20:01Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Good evening Kenneth,
Again, thank you very much for your support!
I am Building with VS 2019.
Do you recommend going to 2022? I am a little scared of side efects. I have a productive, amateur web site on genealogy, and I fear it would “destroy” everything. Bear in mind that I have everything in Winforms ( geneanet.cat, it’s all in Catalan, but just for you to check that I really have something live ! 😊) Please be indulgent as I am not a professional programmer. I do this in my spare time
Right now, I was trying to see what would be the minimal set to have a loadGedcom and a buildGedcom funcions from your code.
I see that you have precisely two funcions which seem to have that purpose, but I don’t know if I will be able to load them... Your software looks very, very professional, with many good idees, like the tree comparison... hope I can make it.!
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Enviat: dijous, 6 de gener de 2022 19:20 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
By the way how are you building the project? If you build from Windows upgrading to visual studio 2022 might solve your problems.
Den tors 6 jan. 2022 15:46Upperspace @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>;
Author
@.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto<mailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
skrev:
By the way,
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>;
Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>: @.<mailto<mailto:@.%3cmailto>: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
A/c: Author @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto<mailto:***@***.******@***.***%3cmailto<mailto:***@***.******@***.***%3cmailto%3cmailto:***@***.******@***.***%3cmailto>:
@.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto<mailto:***@***.******@***.***%3cmailto<mailto:***@***.******@***.***%3cmailto%3cmailto:***@***.******@***.***%3cmailto>: @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
A/c: Upperspace @.**@.mailto<mailto:***@***.******@***.***%3cmailto<mailto:***@***.******@***.***%3cmailto%3cmailto:***@***.******@***.***%3cmailto>:
@.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>;
Author @.**@.mailto:***@***.******@***.***<mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>: @.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.>>>>>>
skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>: @.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.>>>>>>
A/c: Upperspace @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>;
Author
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto<mailto:@.%3cmailto%3cmailtomailto:***@***.***%3cmailto%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto>: @.%3cmailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto>:
@.%3cmailto:@.%3cmailtomailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:
@.%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>>>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto<mailto:***@***.******@***.***%3cmailto%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto>:
@.**@.%3cmailto:@.**@.mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:
@.**@.%3cmailto:@.**@.%3cmailto:@.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006840107>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDY6ZLZTDZ5IETEVQDUUXRJRANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1007380701>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUDJ3SF6X3V7C3V7ZD3UU3ODVANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1007385817&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=1VN1GlX%2Bsc5jIOOoI0KC8gSqPCDd%2FZii6Ol1xzy5jIU%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLO3AWIJRGPL55ZNZNLUU3PFNANCNFSM5LLNWZDA&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=HmwJuHr0KHhrwO2AZrKo8nv0M9f%2FDRTi2xrlVO%2FUGEk%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=jlzceecZAUHXsXuKm4BQ3UScDynM4NRADquRiniTuQk%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=CpkVyWqsxhytgN1wFQDUmpQ%2FwZchDVExGjwLt5ViWjY%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1007674387, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUFAU2IZF6P3TA2MQSDUU44PJANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1007700970&data=04%7C01%7C%7C39106253dadc4abe1bf908d9d218eed3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771826799975153%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=7cyJebpifWJLKDeCZJY77NMSMJcbAIYRGel0n2oZ4Mc%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLORVX3EYAZJDKL3KY3UU5BNJANCNFSM5LLNWZDA&data=04%7C01%7C%7C39106253dadc4abe1bf908d9d218eed3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771826799975153%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=DYS7KtmZ7b2m5F5p2zcNiwYlsk%2BMRsyxBHAmxxj0lLQ%3D&reserved=0. Triage notifications on the go with GitHub Mobile for iOShttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C39106253dadc4abe1bf908d9d218eed3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771826799975153%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=KlCmoo90zkUAGkEdm8tVGrUEBWMJeIh6YZmYQaZ9iDg%3D&reserved=0 or Androidhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C39106253dadc4abe1bf908d9d218eed3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771826799975153%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=Te22P%2BQm9PUWONVoa3DC0x2D8MHF4gqby3UaSRR3HhA%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
I configure path variables so I can execute git. However, it does not recognizes gitk nor git lola
... Any other idea?
De: Jaume Pujol-Busquets Pinyana Enviat: divendres, 7 de gener de 2022 21:08 Per a: Ekmansoft/FamilyTreeCodecText @.***> Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Hi Kenneth,
I’m sweating in despair...
How do I execute gitk –all?? I opened a cmd terminal and it does not recognizes this command
Thanks!
De: Kenneth Ekman @.**@.>> Enviat: divendres, 7 de gener de 2022 21:05 Per a: Ekmansoft/FamilyTreeCodecText @.**@.>> A/c: Upperspace @.**@.>>; Author @.**@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Hmm. Sounds dangerous.
Check with gitk --all
Or Gil Lola
Den fre 7 jan. 2022 20:22Upperspace @.<mailto:@.>> skrev:
Hi Kenneth,
Please let me beg you some help as I think I have screwed all my last two years work with some idiotic execution of git
Is there a command that I can execute to recover from last instruction in GIT (and if so, how)??
Thank you very much for your help, and sorry as in this moment I don’t know who to turn to
Thanks in advance
Jaume
De: Kenneth Ekman @.<mailto:@.>> Enviat: divendres, 7 de gener de 2022 13:56 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Everything is available in the .cs files.
You can see all interfaces in the .cs files.
Some usage examples can be found here
https://github.com/Ekmansoft/FamilyTreeWebTools/blob/master/Services/FamilyWebTree.cs
Den fre 7 jan. 2022 kl 13:46 skrev Upperspace @.<mailto:@.>>:
Dear Kenneth,
I have created a project and I have referenced the three dll created under debug
How can I see a definition of the funcions to be called, or the data types/classes that I shoud use?
I am looking for something like
FamilyTreeLibrary.FamilyTreeStore tree = new FamilyTreeLibrary.FamilyTreeStore();
In this case, it is giving me an error because it says they are namespaces not calsses...
Thanks very much!
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 20:49 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You can still keep your older visual studio even if you install the 2022 version so yes I recommend it
Den tors 6 jan. 2022 20:01Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Good evening Kenneth,
Again, thank you very much for your support!
I am Building with VS 2019.
Do you recommend going to 2022? I am a little scared of side efects. I have a productive, amateur web site on genealogy, and I fear it would “destroy” everything. Bear in mind that I have everything in Winforms ( geneanet.cat, it’s all in Catalan, but just for you to check that I really have something live ! 😊) Please be indulgent as I am not a professional programmer. I do this in my spare time
Right now, I was trying to see what would be the minimal set to have a loadGedcom and a buildGedcom funcions from your code.
I see that you have precisely two funcions which seem to have that purpose, but I don’t know if I will be able to load them... Your software looks very, very professional, with many good idees, like the tree comparison... hope I can make it.!
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Enviat: dijous, 6 de gener de 2022 19:20 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
By the way how are you building the project? If you build from Windows upgrading to visual studio 2022 might solve your problems.
Den tors 6 jan. 2022 15:46Upperspace @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>;
Author
@.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto<mailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
skrev:
By the way,
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>;
Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>: @.<mailto<mailto:@.%3cmailto>: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
A/c: Author @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto<mailto:***@***.******@***.***%3cmailto<mailto:***@***.******@***.***%3cmailto%3cmailto:***@***.******@***.***%3cmailto>:
@.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto<mailto:***@***.******@***.***%3cmailto<mailto:***@***.******@***.***%3cmailto%3cmailto:***@***.******@***.***%3cmailto>: @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
A/c: Upperspace @.**@.mailto<mailto:***@***.******@***.***%3cmailto<mailto:***@***.******@***.***%3cmailto%3cmailto:***@***.******@***.***%3cmailto>:
@.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>;
Author @.**@.mailto:***@***.******@***.***<mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>: @.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.>>>>>>
skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>: @.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.>>>>>>
A/c: Upperspace @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>;
Author
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto<mailto:@.%3cmailto%3cmailtomailto:***@***.***%3cmailto%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto>: @.%3cmailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto>:
@.%3cmailto:@.%3cmailtomailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:
@.%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>>>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto<mailto:***@***.******@***.***%3cmailto%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto>:
@.**@.%3cmailto:@.**@.mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:
@.**@.%3cmailto:@.**@.%3cmailto:@.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006840107>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDY6ZLZTDZ5IETEVQDUUXRJRANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1007380701>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUDJ3SF6X3V7C3V7ZD3UU3ODVANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1007385817&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=1VN1GlX%2Bsc5jIOOoI0KC8gSqPCDd%2FZii6Ol1xzy5jIU%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLO3AWIJRGPL55ZNZNLUU3PFNANCNFSM5LLNWZDA&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=HmwJuHr0KHhrwO2AZrKo8nv0M9f%2FDRTi2xrlVO%2FUGEk%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=jlzceecZAUHXsXuKm4BQ3UScDynM4NRADquRiniTuQk%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=CpkVyWqsxhytgN1wFQDUmpQ%2FwZchDVExGjwLt5ViWjY%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1007674387, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUFAU2IZF6P3TA2MQSDUU44PJANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1007700970&data=04%7C01%7C%7C39106253dadc4abe1bf908d9d218eed3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771826799975153%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=7cyJebpifWJLKDeCZJY77NMSMJcbAIYRGel0n2oZ4Mc%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLORVX3EYAZJDKL3KY3UU5BNJANCNFSM5LLNWZDA&data=04%7C01%7C%7C39106253dadc4abe1bf908d9d218eed3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771826799975153%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=DYS7KtmZ7b2m5F5p2zcNiwYlsk%2BMRsyxBHAmxxj0lLQ%3D&reserved=0. Triage notifications on the go with GitHub Mobile for iOShttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C39106253dadc4abe1bf908d9d218eed3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771826799975153%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=KlCmoo90zkUAGkEdm8tVGrUEBWMJeIh6YZmYQaZ9iDg%3D&reserved=0 or Androidhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C39106253dadc4abe1bf908d9d218eed3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771826799975153%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=Te22P%2BQm9PUWONVoa3DC0x2D8MHF4gqby3UaSRR3HhA%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
Good morning Kenneth,
I saved it! 😊
I fit may be of use for you, here are some pages that helped me a lot:
https://gitready.com/advanced/2009/01/17/restoring-lost-commits.html http://www.programblings.com/2008/06/07/the-illustrated-guide-to-recovering-lost-commits-with-git/
Thanks you for your help!
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.> Enviat: divendres, 7 de gener de 2022 21:05 Per a: Ekmansoft/FamilyTreeCodecText @.> A/c: Upperspace @.>; Author @.> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Hmm. Sounds dangerous.
Check with gitk --all
Or Gil Lola
Den fre 7 jan. 2022 20:22Upperspace @.<mailto:@.>> skrev:
Hi Kenneth,
Please let me beg you some help as I think I have screwed all my last two years work with some idiotic execution of git
Is there a command that I can execute to recover from last instruction in GIT (and if so, how)??
Thank you very much for your help, and sorry as in this moment I don’t know who to turn to
Thanks in advance
Jaume
De: Kenneth Ekman @.<mailto:@.>> Enviat: divendres, 7 de gener de 2022 13:56 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Everything is available in the .cs files.
You can see all interfaces in the .cs files.
Some usage examples can be found here
https://github.com/Ekmansoft/FamilyTreeWebTools/blob/master/Services/FamilyWebTree.cs
Den fre 7 jan. 2022 kl 13:46 skrev Upperspace @.<mailto:@.>>:
Dear Kenneth,
I have created a project and I have referenced the three dll created under debug
How can I see a definition of the funcions to be called, or the data types/classes that I shoud use?
I am looking for something like
FamilyTreeLibrary.FamilyTreeStore tree = new FamilyTreeLibrary.FamilyTreeStore();
In this case, it is giving me an error because it says they are namespaces not calsses...
Thanks very much!
De: Kenneth Ekman @.<mailto:@.>> Enviat: dijous, 6 de gener de 2022 20:49 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.>> A/c: Upperspace @.<mailto:@.>>; Author @.<mailto:@.>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You can still keep your older visual studio even if you install the 2022 version so yes I recommend it
Den tors 6 jan. 2022 20:01Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> skrev:
Good evening Kenneth,
Again, thank you very much for your support!
I am Building with VS 2019.
Do you recommend going to 2022? I am a little scared of side efects. I have a productive, amateur web site on genealogy, and I fear it would “destroy” everything. Bear in mind that I have everything in Winforms ( geneanet.cat, it’s all in Catalan, but just for you to check that I really have something live ! 😊) Please be indulgent as I am not a professional programmer. I do this in my spare time
Right now, I was trying to see what would be the minimal set to have a loadGedcom and a buildGedcom funcions from your code.
I see that you have precisely two funcions which seem to have that purpose, but I don’t know if I will be able to load them... Your software looks very, very professional, with many good idees, like the tree comparison... hope I can make it.!
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Enviat: dijous, 6 de gener de 2022 19:20 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>; Author @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>> Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
By the way how are you building the project? If you build from Windows upgrading to visual studio 2022 might solve your problems.
Den tors 6 jan. 2022 15:46Upperspace @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>> skrev:
Good evening Kenneth (I assumí you are somewhere in Europe! 😊
I am getting closer.
I found out that the runtime that I had was the 5.0.13, and iI have the FamilyTreeLibrary without errors
Now when I move up in the ladder of dependències, any module depending in this later one it’s giving a warning message that the 5.04.404 is not found and it assigns the nearest one, that is the 6.0.0. And I have tried to rebuild the code and it “remembers” the previous version used in the FamilyTreeLibrary
Any clue as how to get rid of this, please?
Best regards!
Jaume
De: Kenneth Ekman @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Enviat: dijous, 6 de gener de 2022 14:38 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>: @.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.>>>> A/c: Upperspace @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>;
Author
@.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
True. No it's not necessary
Den tors 6 jan. 2022 14:13Upperspace @.<mailto<mailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
skrev:
By the way,
@.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
The family TreeCodecdatabase is not in GIT and it is complaining. Is it necessary?
Thanks in advance!
Jaume
De: Jaume Pujol-Busquets Pinyana Enviat: dijous, 6 de gener de 2022 13:57 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>:
@.<mailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>;
Ekmansoft/FamilyTreeCodecText @.<mailto<mailto:@.%3cmailto>: @.<mailto<mailto:@.%3cmailto>: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
A/c: Author @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
Tema: RE: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
Dear Kenneth,
Thanks again for this support.
So that I don't mes sit up... follows the FamilyTreeWebApp.csproj
<?xml version="1.0" encoding="utf-8"?>
net5.0 615a70b1-952a-46cf-9860-a667fd89f64d Ekmansoft Kenneth Ekman LICENSE-2.0.txt en false https://github.com/Ekmansoft/FamilyTreeCodecGedcom >git Genealogy https://github.com/users/Ekmansoft/projects/1 >en Ekmansoft.FamilyTree.WebApp 1.2.0 all runtime; build; native; contentfiles; analyzers; buildtransitive True So if I understand ok your comment, I should change the Version 6.0.0 for the 5.0.404 which apparently is the latest that I have installed?
Best regards
Jaume
De: Kenneth Ekman @.**@.mailto<mailto:***@***.******@***.***%3cmailto<mailto:***@***.******@***.***%3cmailto%3cmailto:***@***.******@***.***%3cmailto>:
@.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
Enviat: dijous, 6 de gener de 2022 13:49 Per a: Ekmansoft/FamilyTreeCodecText @.**@.mailto<mailto:***@***.******@***.***%3cmailto<mailto:***@***.******@***.***%3cmailto%3cmailto:***@***.******@***.***%3cmailto>: @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
A/c: Upperspace @.**@.mailto<mailto:***@***.******@***.***%3cmailto<mailto:***@***.******@***.***%3cmailto%3cmailto:***@***.******@***.***%3cmailto>:
@.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>;
Author @.**@.mailto:***@***.******@***.***<mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
You're welcome, jaume.
Net6.0 as it says in the csproj file is not a package, it's pointing to the version of the dotnet SDK.
It is completely ok to change this to the dotnet SDK you have (and what I used before,) I e net5.0 or dotnetcore 3 1 for that matter.
Den tors 6 jan. 2022 13:31Upperspace @.<mailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>: @.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.>>>>>>
skrev:
Dear Kenneth,
Thank you very much for your answer!
I hope you have a little of patience with me because although I am used to program in C# and .Net, I usually don't work with these libraries that you use and I am not familiar with what exactly is what I need
Through nuget in VS, this is what I have
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
The moment I set the net version in the csproj to be 6.0 it says it is incompatible
Is this the package I need to install?
Thanks again and I apologize for my inexperience in this area.
Best regards!
Jaume Pujol-Busquets
De: Kenneth Ekman @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
Enviat: dijous, 6 de gener de 2022 12:39 Per a: Ekmansoft/FamilyTreeCodecText @.<mailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto<mailto:@.%3cmailto%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>: @.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.>>>>>>
A/c: Upperspace @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>;
Author
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
Tema: Re: [Ekmansoft/FamilyTreeCodecText] NETSDK1045 The current .NET SDK does not support targeting .NET 6.0. (Issue #1)
The problem might be that the project is set to use dotnet6 and you seem to have only dotnet5 installed. Either change the csproj files to target dotnet5 or install the dotnet5 SDK.
Den tors 6 jan. 2022 05:02Upperspace @.<mailto<mailto<mailto:@.%3cmailto%3cmailtomailto:***@***.***%3cmailto%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto>: @.%3cmailto<mailto<mailto:@.%3cmailto%3cmailto>: @.%3cmailto%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto>>>:
@.<mailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.%3cmailto:@.<mailto<mailto:@.%3cmailto:@.%3cmailto:@.%3cmailto>:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>>
skrev:
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets
- Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDOF25SWKZ7MJLCV3DUUUH5FANCNFSM5LLNWZDA
. You are receiving this because you are subscribed to this thread.Message ID: @.<mailto:@.mailto<mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto>:
@.%3cmailto:@.%3cmailtomailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:
@.%3cmailto:@.%3cmailto%3cmailto:@.%3cmailto:@.%3cmailtomailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>>>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>>
- Reply to this email directly, view it on GitHub<
, or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto<mailto:***@***.******@***.***%3cmailto: @.**@.mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto<mailto:***@***.******@***.***%3cmailto%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto>:
@.**@.%3cmailto:@.**@.mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:
@.**@.%3cmailto:@.**@.%3cmailto:@.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>>
- Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006548531
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUEIL2TVYD667ZOHHDDUUWDSTANCNFSM5LLNWZDA
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto>:
@.%3cmailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto:
@.%3cmailto:@.%3cmailto:@.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>>
- Reply to this email directly, view it on GitHub<
or unsubscribe<
. Triage notifications on the go with GitHub Mobile for iOS<
or Android<
. You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto: @.**@.%3cmailto:@.**@.mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006581555>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUG2655KAZUMXKAASJ3UUWIQNANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto<mailto:***@***.***%3cmailto:***@***.***%3cmailto: @.%3cmailto:@.mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006647378>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUGV7Z6I2DMFJGLHITTUUWTMHANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***<mailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***%3cmailto:***@***.***>>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***<mailto:***@***.******@***.***%3cmailto:***@***.******@***.***>>>
— Reply to this email directly, view it on GitHub <
https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1006840107>,
or unsubscribe <
https://github.com/notifications/unsubscribe-auth/ABBYLUDY6ZLZTDZ5IETEVQDUUXRJRANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.mailto:***@***.***%3cmailto:***@***.***>>
— Reply to this email directly, view it on GitHub<
or unsubscribe<
Triage notifications on the go with GitHub Mobile for iOS<
or Android<
You are receiving this because you authored the thread.Message ID: @.**@.mailto:***@***.******@***.***>>
— Reply to this email directly, view it on GitHub < https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1007380701>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBYLUDJ3SF6X3V7C3V7ZD3UU3ODVANCNFSM5LLNWZDA>
. You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1007385817&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=1VN1GlX%2Bsc5jIOOoI0KC8gSqPCDd%2FZii6Ol1xzy5jIU%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLO3AWIJRGPL55ZNZNLUU3PFNANCNFSM5LLNWZDA&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=HmwJuHr0KHhrwO2AZrKo8nv0M9f%2FDRTi2xrlVO%2FUGEk%3D&reserved=0>.
Triage notifications on the go with GitHub Mobile for iOS< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=jlzceecZAUHXsXuKm4BQ3UScDynM4NRADquRiniTuQk%3D&reserved=0> or Android< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7Cd9b66c42bb7a4259340c08d9d1dd08e3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771569541361486%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=CpkVyWqsxhytgN1wFQDUmpQ%2FwZchDVExGjwLt5ViWjY%3D&reserved=0>.
You are receiving this because you authored the thread.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHub https://github.com/Ekmansoft/FamilyTreeCodecText/issues/1#issuecomment-1007674387, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBYLUFAU2IZF6P3TA2MQSDUU44PJANCNFSM5LLNWZDA . You are receiving this because you commented.Message ID: @.<mailto:@.>>
— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FEkmansoft%2FFamilyTreeCodecText%2Fissues%2F1%23issuecomment-1007700970&data=04%7C01%7C%7C39106253dadc4abe1bf908d9d218eed3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771826799975153%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=7cyJebpifWJLKDeCZJY77NMSMJcbAIYRGel0n2oZ4Mc%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAVL3HLORVX3EYAZJDKL3KY3UU5BNJANCNFSM5LLNWZDA&data=04%7C01%7C%7C39106253dadc4abe1bf908d9d218eed3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771826799975153%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=DYS7KtmZ7b2m5F5p2zcNiwYlsk%2BMRsyxBHAmxxj0lLQ%3D&reserved=0. Triage notifications on the go with GitHub Mobile for iOShttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7C%7C39106253dadc4abe1bf908d9d218eed3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771826799975153%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=KlCmoo90zkUAGkEdm8tVGrUEBWMJeIh6YZmYQaZ9iDg%3D&reserved=0 or Androidhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7C%7C39106253dadc4abe1bf908d9d218eed3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637771826799975153%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=Te22P%2BQm9PUWONVoa3DC0x2D8MHF4gqby3UaSRR3HhA%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
Closing it as I think it is no longer an issue.
Dear Kenneth,
thank you for sharing all this code. I needed really badly, as my code for GEDCOM was really slow.
However, I try to setup the environment in my computer, and all the time come accross with this error. Current installed sdk are 3.1.416 [C:\Program Files\dotnet\sdk] 5.0.303 [C:\Program Files\dotnet\sdk] 5.0.404 [C:\Program Files\dotnet\sdk]
I am despairing as I am bot able to progress. All in all, what I need is upload and build gedcom files...
Thank you very much for your time
Jaume Pujol-Busquets