ElTangas jtag2updi issues

ElTangas / jtag2updi

UPDI programmer software for Arduino (targets Tiny AVR-0/1/2, Mega AVR-0 and AVR-DA/DB MCUs)

MIT License

337 stars 90 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Using jtag2updi as a library for a standalone Arduino (use case being over-the-air programming)

#77 sieumap43 opened 3 months ago
1
avr128da28 to be programmed by arduino uno?

#76 hoka83 opened 7 months ago
0
mkII/UPDI: Allow r/w SRAM without locking CPU

#75 Frankkkkk opened 10 months ago
0
Can at tiny 1616 act as programmer?

#74 MFahreza69 opened 1 year ago
0
No support for NVMv3 devices such as AVR-EA and AVR-EB

#73 MCUdude opened 1 year ago
0
Building fail for Arduino Leonardo/ProMicro (Atmega32u4)

#72 AKTanara opened 1 year ago
4
Question: programing atmega4809 chips?

#71 GlennWSo opened 1 year ago
1
Can't program with verify without power-cycle on DxCore (AVR32DD14)

#70 pcfreak1201 opened 1 year ago
0
jtag2updi broken with avrdude-7.0

#69 mhx closed 1 year ago
2
Arduino uno progrramer error

#68 muhammetfaik opened 2 years ago
2
Status LED feature

#67 jamesarm97 closed 2 years ago
1
erasing locked AVR32DA28 - impossible

#66 flexphperia opened 2 years ago
3
Added ATTiny3224 and platformio init, builts, not tested

#65 ieb closed 2 years ago
2
web serial firmware update tool added

#64 mofosyne opened 2 years ago
1
Can't unlock ATTiny1624

#63 Strat00s opened 2 years ago
3
Unable to program ATMega4809

#62 vjkolaventy closed 2 years ago
1
The programmer is not able to unbrick locked tinyAVR MCU at all

#61 kosilin opened 2 years ago
7
Change Programmer Pin

#60 ElectronicSmokeUK opened 2 years ago
1
Unstable trailing edge of stopbit pulse while using software UPDI I/O

#59 kosilin closed 2 years ago
8
Which parts support NVM version 2?

#58 llinjupt opened 2 years ago
3
Add support for more jtagmkii baud rates

#57 MCUdude closed 2 years ago
4
Revert "Add more supported baudrates"

#56 ElTangas closed 2 years ago
0
Add more supported baudrates

#55 MCUdude closed 2 years ago
5
Suppressing avrdude harmless warning on "Cannot locate “flash” and “boot” memories in description"

#54 d3lta-v closed 2 years ago
2
Unable to erase ATtiny402

#53 Frogieder closed 3 years ago
5
After locking AVR32DA28, unable to communicate via UPDI

#52 DaleMitchell closed 3 years ago
1
Error in avrdude.conf file!

#51 dev-ahmed-ibrahim opened 3 years ago
1
Highlight new python3 usage for AVR JTAG ICE v2.0 stick.

#50 cbalint13 closed 3 years ago
1
Feature request: series 2 support

#49 trichl closed 3 years ago
0
Arduino Nano Every as programmer

#48 bdoubleu86 opened 3 years ago
5
Why PD6?

#47 jirkaptr opened 3 years ago
2
ATtiny1607 at 8MHz with Arduino IDE

#46 Alailek opened 3 years ago
3
Error programming ATTiny1614: bad response to enter progmode command: RSP_ILLEGAL_MCU_STATE

#45 kais58 opened 3 years ago
3
erase not working after lockbit set

#44 mechatroniks-git closed 3 years ago
6
Can't unlock a locked ATtiny404 with chip erase - "avrdude: jtagmkII_program_enable(): bad response to enter progmode command: RSP_ ILLEGAL_MCU_STATE"

#43 willlewin closed 4 years ago
3
Supported chips to use as programmer?

#42 sideswiper22 opened 4 years ago
6
UPDI programming with level translation

#41 vladbelous opened 4 years ago
8
avrdude.conf is broken

#40 mikrocoder opened 4 years ago
9
added config file for release version 6.3 of avrdude

#39 maartenvanschagen closed 4 years ago
0
Where exactly does the UPDI transmission start and end in the code?

#38 mikrocoder opened 4 years ago
2
-C option

#37 maartenvanschagen closed 4 years ago
2
modified avrdude.conf has errors

#36 maartenvanschagen closed 4 years ago
5
Fix ATmega16/32, and add support for ATmega8/88(P,PB).

#35 serisman closed 4 years ago
0
missing 9 series

#34 mikrocoder closed 4 years ago
5
Update README.md

#33 vonnieda closed 4 years ago
1
Could jtag2updi be ported to a CH552?

#32 DustinWatts opened 4 years ago
1
Support AVR-DA, add debug channel, add timeouts

#31 SpenceKonde closed 4 years ago
41
Does the TEMP register stuff actually save us anything?

#30 SpenceKonde closed 4 years ago
2
JICE_io::flush() is brittle

#29 SpenceKonde closed 4 years ago
5
Port manipulation issue/question

#28 SpenceKonde opened 4 years ago
2