search

ElectricTyphoon / open-hardware-monitor

Automatically exported from code.google.com/p/open-hardware-monitor
0 stars 0 forks source link

Support for IT8772F on Shuttle XPC SH67Hx mainboards #257

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What is the expected output? What do you see instead?
Expected output: correct voltages (e.g. on 12V line)
Seeing instead: wrong voltage

What version of the product are you using? On what operating system?
Trunk rev. 347 on Windows 7 x64

Please provide any additional information below.
Build with visual studio 2010, modified code for basic support of IT8772F

Please attach a Report created with "File / Save Report...".
Attached report and diff of code changes

Original issue reported on code.google.com by reinlrol...@gmail.com on 24 Jul 2011 at 11:11

Attachments:

GoogleCodeExporter commented 9 years ago 
Thank you for your test on the IT8772E. I have added a similar implementation 
by assuming the hardware is identical to IT8721F / IT8728F with respect to 
hardware monitoring. Unfortunately I do not have any datasheet.

Some of the more basic voltage readings like VCore (most likely the first one) 
should be correct now. In order to create a correct mainboard specific 
configuration of the voltage scaling I would need screenshots of an official 
hardware monitoring tool from Shuttle (with a report of the Open Hardware 
Monitor just created before/after).

Original comment by moel.mich on 2 Aug 2011 at 9:09

GoogleCodeExporter commented 9 years ago 
The initial support for the IT8772E can be found in revision r356.

Original comment by moel.mich on 2 Aug 2011 at 9:10

GoogleCodeExporter commented 9 years ago 
Hello,
Unfortunately there is no tool provided by shuttle which displays the required 
data. The only possiblity was to make a screenshot from the hardware monitor in 
the BIOS. I attached the screenshot of the BIOS as well as a report from OHW 
after booting.

Original comment by reinlrol...@gmail.com on 6 Aug 2011 at 12:53

Attachments:

GoogleCodeExporter commented 9 years ago 
Thank you very much. With revision r357 I have added a mainboard specific 
configuration for your system. Can you please check if everything is correct 
now? And please submit a report once more.

Original comment by moel.mich on 6 Aug 2011 at 5:29

GoogleCodeExporter commented 9 years ago 
Hello,
it seems to be correct now. Attached you will find another report using 
revision r357

Original comment by reinlrol...@gmail.com on 6 Aug 2011 at 5:51

Attachments:

GoogleCodeExporter commented 9 years ago 
I have added additional power sensors for Intel Sandy Bridge CPUs in the latest 
SVN revision. Can you please run another test to see if everything works 
correctly and post a report?

Original comment by moel.mich on 11 Aug 2011 at 10:28

GoogleCodeExporter commented 9 years ago 
Attached you will find a report using r358

Original comment by reinlrol...@gmail.com on 15 Aug 2011 at 8:28

Attachments: