Open bowserjr2424 opened 7 years ago
It should be possible to build a system like this with just what's already in the mod, routing signals appropriately.
If it isn't, can you explain in more detail what's missing?
@Baughn well pull stations would be nice, or call points. the basic idea of a pull station is a signal switch that cant be turned back off without a key.
and heres a call point
I did an issue about this A LONG time ago, #472 to be exact. but i didn't explain it enough.
This is a fire alarm control panel, this one has 4 zones and 2 NACs, The zones are the areas where detectors and pull stations are, and the NACs are the circuits for the alarms themselves, one for the horn, one for the strobe, this is basically the center of the fire alarm system.
This is the pull station, a device for setting off the alarm system manually, basically a switch, it is stuck on until it is reset with the key.
This is the alarm itself, not much different from the ones in the mod, other then the fact that the horn and the strobe are seperate circuits.
This is a smoke detector, basically the same as the one in the mod
For more information, look on YouTube for a video demonstrating a fire alarm system. I know all these things because i am an enthusiast and i own every device shown in this issue