Open OctoData opened 3 years ago
This bug-tracker is for bugs, feature requests and development tracking, not general support. Please see the support page for support and discussion.
DC-DC Converter only accepts 'Copper Cable' for inputs. Unable to utilize DC-DC Convert to step-up voltage (e.g. 200 ---> 800) as shown in the [Autominer][https://wiki.electrical-age.net/index.php?title=Autominer_example#Start_with_a_200V_power_unit) example.
Create DC-DC Converter. Connect to existing signal cable. Place Ferromagnetic Core (Center) Output (GREEN) && INPUT (YELLOW) will only accept copper cable.
1.17.0
That is intended. Electrical cables were first used to set the ratio, but they were replaced by copper cables.
This bug-tracker is for bugs, feature requests and development tracking, not general support. Please see the support page for support and discussion.
Issue description
DC-DC Converter only accepts 'Copper Cable' for inputs. Unable to utilize DC-DC Convert to step-up voltage (e.g. 200 ---> 800) as shown in the [Autominer][https://wiki.electrical-age.net/index.php?title=Autominer_example#Start_with_a_200V_power_unit) example.
Steps to reproduce
Create DC-DC Converter. Connect to existing signal cable. Place Ferromagnetic Core (Center) Output (GREEN) && INPUT (YELLOW) will only accept copper cable.
Electrical Age version
1.17.0