Another Wyze V2 glitch issue

[iankaufmann]

• exact camera hardware: Wyzecam V2
• the Xiaomi-Dafang-Hacks commitid (from git log) you are experiencing the issue with: 2948300 / latest

Description

The RTSP stream when viewed through Blue Iris has glitches that fill half the screen with multiple colored blocks (sometimes full green) at least once per minute. Additionally, the bottom 80 pixels or so of the feed is a blurred mess at all times.

I can pull up the Dafang WebUI preview and the RTSP stream side by side and it only happens on the RTSP side.

It happens even if the RTSP server has been restarted seconds ago. No amount of tweaking video settings on Dafang seems to remedy the situation (unless I switch to FixedQP, which is just too low quality to be usable for anything)

What did you do to debug the issue

Tweaking video settings, restarting RTSP, ensuring no unnecessary services are running. All motion detection is turned off. Auto Night detection turned off.

I also tried to swap v4l2rtspserver-master with v4l2rtspserver-master-bak but the RTSP server wouldn't start in that case.

Video Size: 1600x900 Bitrate: 500kbps Format: SMART FrameRate: 15 per 1 second

Evidence

Please add snippets from the logfiles in:

• /system/sdcard/log/startup.log

  
  ==================================================
  Starting the Dafang Hacks Custom Application Layer
  ==================================================
  Loaded common functions
  Created etc directory on sdcard
  Bind mounted /system/sdcard/bin/busybox to /bin/busybox
  Bind mounted /system/sdcard/root to /root
  Bind mounted /system/sdcard/etc to /etc
  wpa_supplicant: wpa_supplicant v2.5.nova.1.02
  random: Trying to read entropy from /dev/random
  Successfully initialized wpa_supplicant
  Initializing interface 'wlan0' conf '/system/sdcard/config/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
  Configuration file '/system/sdcard/config/wpa_supplicant.conf' -> '/system/sdcard/config/wpa_supplicant.conf'
  Reading configuration file '/system/sdcard/config/wpa_supplicant.conf'
  ctrl_interface='/var/run/wpa_supplicant'
  ctrl_interface_group='0'
  ap_scan=1
  Priority group 2
  id=0 ssid='HeatVision-IoT'
  nl80211: Could not add multicast membership for vendor events: -2 (No such file or directory)
  rfkill: Cannot open RFKILL control device
  nl80211: RFKILL status not available
  nl80211: Supported cipher 00-0f-ac:1
  nl80211: Supported cipher 00-0f-ac:5
  nl80211: Supported cipher 00-0f-ac:2
  nl80211: Supported cipher 00-0f-ac:4
  nl80211: Disable use_monitor with device_ap_sme since no monitor mode support detected
  nl80211: interface wlan0 in phy phy0
  nl80211: Set mode ifindex 2 iftype 2 (STATION)
  nl80211: Subscribe to mgmt frames with non-AP handle 0x7091f8
  nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7091f8 match=06
  nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7091f8 match=0a07
  nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7091f8 match=0a11
  nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7091f8 match=1101
  nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7091f8 match=1102
  nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7091f8 match=0505
  netlink: Operstate: ifindex=2 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
  nl80211: Could not re-add multicast membership for vendor events: -2 (No such file or directory)
  nl80211: driver param='(null)'
  Add interface wlan0 to a new radio phy0
  nl80211: Regulatory information - country=00
  nl80211: 2402-2472 @ 40 MHz 20 mBm
  nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR)
  nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
  nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
  nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
  nl80211: 57240-63720 @ 2160 MHz 0 mBm
  nl80211: Added 802.11b mode based on 802.11g information
  wlan0: Own MAC address: 2c:aa:8e:50:9e:a7
  wpa_driver_nl80211_set_key: ifindex=2 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
  wpa_driver_nl80211_set_key: ifindex=2 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
  wpa_driver_nl80211_set_key: ifindex=2 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
  wpa_driver_nl80211_set_key: ifindex=2 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
  wlan0: RSN: flushing PMKID list in the driver
  nl80211: Flush PMKIDs
  wlan0: Setting scan request: 0.100000 sec
  ENGINE: Loading dynamic engine
  ENGINE: Loading dynamic engine
  EAPOL: SUPP_PAE entering state DISCONNECTED
  EAPOL: Supplicant port status: Unauthorized
  nl80211: Skip set_supp_port(unauthorized) while not associated
  EAPOL: KEY_RX entering state NO_KEY_RECEIVE
  EAPOL: SUPP_BE entering state INITIALIZE
  EAP: EAP entering state DISABLED
  ctrl_interface_group=0
  wlan0: Added interface wlan0
  wlan0: State: DISCONNECTED -> DISCONNECTED
  nl80211: Set wlan0 operstate 0->0 (DORMANT)
  netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
  Writing wpa stat file /tmp/wpastat
  Daemonize..
  udhcpc: deleting routers
  adding dns 192.168.1.20
  adding dns 192.168.1.1
  Initialized gpios
  Determined image sensor model as 
  dropbear: 
  lighttpd: 
  Startup finished!

Contents of dmesg after startup: [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.14 (root@ubuntu) (gcc version 4.7.2 (Ingenic r2.3.3 2016.12) ) #21 PREEMPT Thu Oct 19 11:38:16 CST 2017 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 RESET ERROR PC:801CB660 [ 0.000000] [<801cb660>] __delay+0x0/0x10 [ 0.000000] CPU0 revision is: 00d00101 (Ingenic Xburst) [ 0.000000] FPU revision is: 00b70000 [ 0.000000] cgu_get_rate, parent = 860160000, rate = 0, m = 0, n = 0, reg val = 0x000020ff [ 0.000000] CCLK:860MHz L2CLK:430Mhz H0CLK:200MHz H2CLK:200Mhz PCLK:100Mhz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 00535000 @ 00010000 (usable) [ 0.000000] memory: 0003b000 @ 00545000 (usable after init) [ 0.000000] User-defined physical RAM map: [ 0.000000] memory: 06800000 @ 00000000 (usable) [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x067fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x067fffff] [ 0.000000] On node 0 totalpages: 26624 [ 0.000000] free_area_init_node: node 0, pgdat 80541cb0, node_mem_map 81000000 [ 0.000000] Normal zone: 208 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 26624 pages, LIFO batch:7 [ 0.000000] Primary instruction cache 32kB, 8-way, VIPT, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] pls check processor_id[0x00d00101],sc_jz not support! [ 0.000000] MIPS secondary cache 128kB, 8-way, linesize 32 bytes. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 26416 [ 0.000000] Kernel command line: console=ttyS1,115200n8 mem=104M@0x0 ispmem=8M@0x6800000 rmem=16M@0x7000000 init=/linuxrc rootfstype=squashfs root=/dev/mtdblock2 rw mtdparts=jz_sfc:256k(boot),2048k(kernel),3392k(root),640k(driver),4736k(appfs),2048k(backupk),640k(backupd),2048k(backupa),256k(config),256k(para),-(flag) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 99300k/106496k available (4024k kernel code, 7196k reserved, 1304k data, 236k init, 0k highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:418 [ 0.000000] clockevents_config_and_register success. [ 0.000024] Calibrating delay loop... 858.52 BogoMIPS (lpj=4292608) [ 0.087753] pid_max: default: 32768 minimum: 301 [ 0.092737] Mount-cache hash table entries: 512 [ 0.097838] Initializing cgroup subsys debug [ 0.102100] Initializing cgroup subsys freezer [ 0.109171] regulator-dummy: no parameters [ 0.113461] NET: Registered protocol family 16 [ 0.135463] bio: create slab at 0 [ 0.141790] jz-dma jz-dma: JZ SoC DMA initialized [ 0.147049] SCSI subsystem initialized [ 0.150980] usbcore: registered new interface driver usbfs [ 0.156555] usbcore: registered new interface driver hub [ 0.161990] usbcore: registered new device driver usb [ 0.167293] i2c-gpio i2c-gpio.1: using pins 57 (SDA) and 58 (SCL) [ 0.173502] (null): set:249 hold:250 dev=100000000 h=500 l=500 [ 0.179650] media: Linux media interface: v0.10 [ 0.184203] Linux video capture interface: v2.00 [ 0.191006] Switching to clocksource jz_clocksource [ 0.195961] cfg80211: Calling CRDA to update world regulatory domain [ 0.203036] jz-dwc2 jz-dwc2: cgu clk gate get error [ 0.207972] jz-dwc2 jz-dwc2: regulator vbus get error [ 0.213058] DWC IN OTG MODE [ 0.366307] sft id =========================off [ 0.370923] dwc2 dwc2: Keep PHY ON [ 0.374316] dwc2 dwc2: Using Buffer DMA mode [ 0.578462] dwc2 dwc2: Core Release: 3.00a [ 0.582584] dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller [ 0.588914] dwc2 dwc2: new USB bus registered, assigned bus number 1 [ 0.596301] hub 1-0:1.0: USB hub found [ 0.600042] hub 1-0:1.0: 1 port detected [ 0.604203] dwc2 dwc2: DWC2 Host Initialized [ 0.608700] NET: Registered protocol family 2 [ 0.613678] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.620704] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.627184] TCP: Hash tables configured (established 1024 bind 1024) [ 0.633636] TCP: reno registered [ 0.636834] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.642790] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.649390] NET: Registered protocol family 1 [ 0.654105] RPC: Registered named UNIX socket transport module. [ 0.660038] RPC: Registered udp transport module. [ 0.664874] RPC: Registered tcp transport module. [ 0.669573] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.676616] freq_udelay_jiffys[0].max_num = 10 [ 0.681044] cpufreq udelay loops_per_jiffy [ 0.685508] dwc2 dwc2: ID PIN CHANGED! [ 0.689288] init DWC as A_HOST [ 0.692373] 12000 59885 59885
[ 0.695633] 24000 119771 119771 [ 0.699057] 60000 299428 299428 [ 0.702612] 120000 598857 598857 [ 0.706068] 200000 998095 998095 [ 0.709599] 300000 1497142 1497142
[ 0.713413] 600000 2994285 2994285
[ 0.717044] 792000 3952457 3952457
[ 0.720752] 1008000 5030400 5030400
[ 0.724573] 1200000 5988571 5988571
[ 0.733941] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.740785] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.747386] msgmni has been set to 193 [ 0.752621] io scheduler noop registered [ 0.756557] io scheduler cfq registered (default) [ 0.763233] jz-uart.1: ttyS1 at MMIO 0x10031000 (irq = 58) is a uart1 [ 0.771424] console [ttyS1] enabled, bootconsole disabled [ 0.786639] brd: module loaded [ 0.791904] loop: module loaded [ 0.796178] zram: Created 2 device(s) ... [ 0.800414] logger: created 256K log 'log_main' [ 0.805821] jz SADC driver registeres over! [ 0.811136] jz TCU driver register completed [ 0.816229] the id code = c84018, the flash name is GD25Q127C [ 0.822193] JZ SFC Controller for SFC channel 0 driver register [ 0.828397] 11 cmdlinepart partitions found on MTD device jz_sfc [ 0.834661] Creating 11 MTD partitions on "jz_sfc": [ 0.839721] 0x000000000000-0x000000040000 : "boot" [ 0.845273] 0x000000040000-0x000000240000 : "kernel" [ 0.850929] 0x000000240000-0x000000590000 : "root" [ 0.856485] 0x000000590000-0x000000630000 : "driver" [ 0.862175] 0x000000630000-0x000000ad0000 : "appfs" [ 0.867844] 0x000000ad0000-0x000000cd0000 : "backupk" [ 0.873668] 0x000000cd0000-0x000000d70000 : "backupd" [ 0.879448] 0x000000d70000-0x000000f70000 : "backupa" [ 0.885297] 0x000000f70000-0x000000fb0000 : "config" [ 0.891037] 0x000000fb0000-0x000000ff0000 : "para" [ 0.896641] 0x000000ff0000-0x000001000000 : "flag" [ 0.902119] SPI NOR MTD LOAD OK [ 0.905496] tun: Universal TUN/TAP device driver, 1.6 [ 0.910731] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [ 0.917291] usbcore: registered new interface driver zd1201 [ 0.923141] usbcore: registered new interface driver r8152 [ 0.928911] usbcore: registered new interface driver usb-storage [ 0.935289] usbcore: registered new interface driver usbserial [ 0.941373] usbcore: registered new interface driver usbserial_generic [ 0.948204] usbserial: USB Serial support registered for generic [ 0.954483] usbcore: registered new interface driver ch341 [ 0.960209] usbserial: USB Serial support registered for ch341-uart [ 0.966761] usbcore: registered new interface driver cp210x [ 0.972585] usbserial: USB Serial support registered for cp210x [ 0.978763] usbcore: registered new interface driver pl2303 [ 0.984585] usbserial: USB Serial support registered for pl2303 [ 1.491691] i8042: i8042 controller selftest timeout [ 1.497348] jzmmc_v1.2 jzmmc_v1.2.0: vmmc regulator missing [ 1.542524] jzmmc_v1.2 jzmmc_v1.2.0: register success! [ 1.547913] jzmmc_v1.2 jzmmc_v1.2.1: vmmc regulator missing [ 1.593446] jzmmc_v1.2 jzmmc_v1.2.1: register success! [ 1.598926] hidraw: raw HID events driver (C) Jiri Kosina [ 1.604812] usbcore: registered new interface driver usbhid [ 1.610589] usbhid: USB HID core driver [ 1.614677] Netfilter messages via NETLINK v0.30. [ 1.619611] nf_conntrack version 0.5.0 (1551 buckets, 6204 max) [ 1.626370] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.631985] TCP: cubic registered [ 1.635470] NET: Registered protocol family 17 [ 1.641084] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.648330] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.660236] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.668040] Freeing unused kernel memory: 236K (80545000 - 80580000) [ 1.795390] dwc2 dwc2: ++OTG Interrupt: A-Device Timeout Change++ [ 3.702413] jzmmc_v1.2 jzmmc_v1.2.0: card inserted, state=0 [ 4.981765] wait stable.[246][cgu_msc0] [ 4.985829] mmc0: new high speed SDHC card at address 59b4 [ 4.994224] mmcblk0: mmc0:59b4 29.8 GiB [ 5.002106] mmcblk0: p1 [ 5.522150] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 6.657530] Unable to find swap-space signature [ 7.059505] RTL871X: module init start [ 7.065654] RTL871X: rtl8189ftv v4.3.24.7_21113.20170208.nova.1.02 [ 7.072067] RTL871X: build time: Jan 24 2018 14:43:26 [ 7.077389] wlan power on [ 7.092849] RTL871X: module init ret=0 [ 7.138398] mmc1: card claims to support voltages below the defined range. These will be ignored. [ 7.171148] mmc1: new SDIO card at address 0001 [ 7.186101] RTL871X: ++++++++rtw_drv_init: vendor=0x024c device=0xf179 class=0x07 [ 7.249436] RTL871X: HW EFUSE [ 7.262464] RTL871X: hal_com_config_channel_plan chplan:0x20 [ 7.452049] RTL871X: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1 [ 7.482749] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=2c:aa:8e:50:9e:a7 [ 10.570551] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008 [ 10.672585] RTL871X: start auth [ 10.679141] RTL871X: auth success, start assoc [ 10.691253] RTL871X: assoc success [ 10.695035] RTL871X: recv eapol packet [ 10.715921] RTL871X: send eapol packet [ 10.725503] RTL871X: recv eapol packet [ 10.731822] RTL871X: send eapol packet [ 10.738837] RTL871X: set pairwise key camid:4, addr:86:83:c2:8d:25:fd, kid:0, type:AES [ 10.750933] RTL871X: set group key camid:5, addr:86:83:c2:8d:25:fd, kid:1, type:AES [ 12.349414] request spk en gpio 63 ok! [ 12.349430] jz_codec_register: probe() successful! [ 12.356668] cgu_set_rate, parent = 860160000, rate = 2048000, n = 420, reg val = 0x000021a4 [ 12.356687] cgu_enable,cgu_i2s reg val = 0x200021a4 [ 12.702816] dma dma0chan24: Channel 24 have been requested.(phy id 7,type 0x06 desc a59b1000) [ 12.712076] dma dma0chan25: Channel 25 have been requested.(phy id 6,type 0x06 desc a598a000) [ 13.759900] motor_probe743 [ 13.778792] name : i2c-gpio1 nr : 1 [ 13.784665] name : i2c0 nr : 0 [ 13.849150] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 13.856315] i2c i2c-0: --I2C txabrt: [ 13.860025] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 13.866636] error: sensor_read,172 ret = -5 [ 13.870970] sensor_read: addr=0xa value = 0x0 [ 13.875586] err sensor read addr = 0xa, value = 0x0 [ 13.940783] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 13.947998] i2c i2c-0: --I2C txabrt: [ 13.951788] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 13.958414] error: sensor_read,172 ret = -5 [ 13.962762] sensor_read: addr=0x300a value = 0x0 [ 13.967636] err sensor read addr = 0x300a, value = 0x0 [ 14.033882] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.041018] i2c i2c-0: --I2C txabrt: [ 14.044744] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.051490] error: sensor_read,172 ret = -5 [ 14.055850] sensor_read: addr=0x300b value = 0x0 [ 14.060784] err sensor read addr = 0x300b, value = 0x0 [ 14.126894] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.134046] i2c i2c-0: --I2C txabrt: [ 14.137756] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.144369] error: sensor_read,172 ret = -5 [ 14.148702] sensor_read: addr=0xa value = 0x0 [ 14.153376] err sensor read addr = 0xa, value = 0x0 [ 14.218660] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.225806] i2c i2c-0: --I2C txabrt: [ 14.229515] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.236124] error: sensor_read,172 ret = -5 [ 14.240457] sensor_read: addr=0x580b value = 0x0 [ 14.245342] err sensor read addr = 0x580b, value = 0x0 [ 14.312402] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.319540] i2c i2c-0: --I2C txabrt: [ 14.323781] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.330840] error: sensor_read,172 ret = -5 [ 14.335214] sensor_read: addr=0x580b value = 0x0 [ 14.340091] err sensor read addr = 0x580b, value = 0x0 [ 14.406612] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.413798] i2c i2c-0: --I2C txabrt: [ 14.417510] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.424141] error: sensor_read,172 ret = -5 [ 14.428474] sensor_read: addr=0x3107 value = 0x0 [ 14.433369] err sensor read addr = 0x3107, value = 0x0 [ 14.499031] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.506181] i2c i2c-0: --I2C txabrt: [ 14.509892] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.516502] error: sensor_read,172 ret = -5 [ 14.520837] sensor_read: addr=0x3107 value = 0x0 [ 14.525776] err sensor read addr = 0x3107, value = 0x0 [ 14.593883] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.601023] i2c i2c-0: --I2C txabrt: [ 14.604747] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.611347] error: sensor_read,172 ret = -5 [ 14.615693] sensor_read: addr=0x3000 value = 0x0 [ 14.620566] err sensor read addr = 0x3000, value = 0x0 [ 14.686282] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.693433] i2c i2c-0: --I2C txabrt: [ 14.697141] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.703775] error: sensor_read,172 ret = -5 [ 14.708108] sensor_read: addr=0xa value = 0x0 [ 14.712727] err sensor read addr = 0xa, value = 0x0 [ 14.778076] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.785227] i2c i2c-0: --I2C txabrt: [ 14.788991] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.796155] error: sensor_read,172 ret = -5 [ 14.800496] sensor_read: addr=0xf0 value = 0x0 [ 14.805226] err sensor read addr = 0xf0, value = 0x0 [ 14.871635] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.879513] i2c i2c-0: --I2C txabrt: [ 14.883327] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.890209] error: sensor_read,172 ret = -5 [ 14.894563] sensor_read: addr=0xf0 value = 0x0 [ 14.899258] err sensor read addr = 0xf0, value = 0x0 [ 14.964560] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.971760] i2c i2c-0: --I2C txabrt: [ 14.975581] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.982181] error: sensor_read,172 ret = -5 [ 14.986537] sensor_read: addr=0xf0 value = 0x0 [ 14.991231] err sensor read addr = 0xf0, value = 0x0 [ 15.057304] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.064469] i2c i2c-0: --I2C txabrt: [ 15.068179] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.074855] error: sensor_read,172 ret = -5 [ 15.079277] sensor_read: addr=0xfc value = 0x0 [ 15.084054] err sensor read addr = 0xfc, value = 0x0 [ 15.150460] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.157614] i2c i2c-0: --I2C txabrt: [ 15.161324] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.167936] error: sensor_read,172 ret = -5 [ 15.172271] sensor_read: addr=0x3004 value = 0x0 [ 15.177226] err sensor read addr = 0x3004, value = 0x0 [ 15.242807] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.249941] i2c i2c-0: --I2C txabrt: [ 15.253665] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.260264] error: sensor_read,172 ret = -5 [ 15.264611] sensor_read: addr=0x300a value = 0x0 [ 15.269483] err sensor read addr = 0x300a, value = 0x0 [ 15.335748] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.342900] i2c i2c-0: --I2C txabrt: [ 15.346610] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.353768] error: sensor_read,172 ret = -5 [ 15.358105] sensor_read: addr=0x31f3 value = 0x0 [ 15.363010] err sensor read addr = 0x31f3, value = 0x0 [ 15.428654] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.435804] i2c i2c-0: --I2C txabrt: [ 15.439511] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.446123] error: sensor_read,172 ret = -5 [ 15.450458] sensor_read: addr=0x3107 value = 0x0 [ 15.455343] err sensor read addr = 0x3107, value = 0x0 [ 15.520948] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.528097] i2c i2c-0: --I2C txabrt: [ 15.531805] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.538417] error: sensor_read,172 ret = -5 [ 15.542763] sensor_read: addr=0x4 value = 0x0 [ 15.547368] err sensor read addr = 0x4, value = 0x0 [ 15.614362] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.621503] i2c i2c-0: --I2C txabrt: [ 15.625228] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.631828] error: sensor_read,172 ret = -5 [ 15.636176] sensor_read: addr=0xa value = 0x0 [ 15.640781] err sensor read addr = 0xa, value = 0x0 [ 15.706228] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.713376] i2c i2c-0: --I2C txabrt: [ 15.717083] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.723693] error: sensor_read,172 ret = -5 [ 15.728027] sensor_read: addr=0x0 value = 0x0 [ 15.732643] err sensor read addr = 0x0, value = 0x0 [ 15.797977] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.805126] i2c i2c-0: --I2C txabrt: [ 15.808835] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.815448] error: sensor_read,172 ret = -5 [ 15.819781] sensor_read: addr=0x300a value = 0x0 [ 15.824719] err sensor read addr = 0x300a, value = 0x0 [ 15.891649] sensor_read: addr=0xa value = 0xf [ 15.896679] sensor_read: addr=0xb value = 0x23 [ 15.961529] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.968674] i2c i2c-0: --I2C txabrt: [ 15.972393] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.978993] error: sensor_read,172 ret = -5 [ 15.983339] sensor_read: addr=0x31f3 value = 0x0 [ 15.988214] err sensor read addr = 0x31f3, value = 0x0 [ 16.053859] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 16.060996] i2c i2c-0: --I2C txabrt: [ 16.064718] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 16.071315] error: sensor_read,172 ret = -5 [ 16.075724] sensor_read: addr=0x3008 value = 0x0 [ 16.080853] err sensor read addr = 0x3008, value = 0x0 [ 16.086222] info: failed sensor find [ 16.223058] register all isp device successfully! [ 16.232511] @@@@ tx-isp-probe ok @@@@@

* dmesg

Content of dmesg

[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.14 (root@ubuntu) (gcc version 4.7.2 (Ingenic r2.3.3 2016.12) ) #21 PREEMPT Thu Oct 19 11:38:16 CST 2017 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 RESET ERROR PC:801CB660 [ 0.000000] [<801cb660>] __delay+0x0/0x10 [ 0.000000] CPU0 revision is: 00d00101 (Ingenic Xburst) [ 0.000000] FPU revision is: 00b70000 [ 0.000000] cgu_get_rate, parent = 860160000, rate = 0, m = 0, n = 0, reg val = 0x000020ff [ 0.000000] CCLK:860MHz L2CLK:430Mhz H0CLK:200MHz H2CLK:200Mhz PCLK:100Mhz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 00535000 @ 00010000 (usable) [ 0.000000] memory: 0003b000 @ 00545000 (usable after init) [ 0.000000] User-defined physical RAM map: [ 0.000000] memory: 06800000 @ 00000000 (usable) [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x067fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x067fffff] [ 0.000000] On node 0 totalpages: 26624 [ 0.000000] free_area_init_node: node 0, pgdat 80541cb0, node_mem_map 81000000 [ 0.000000] Normal zone: 208 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 26624 pages, LIFO batch:7 [ 0.000000] Primary instruction cache 32kB, 8-way, VIPT, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] pls check processor_id[0x00d00101],sc_jz not support! [ 0.000000] MIPS secondary cache 128kB, 8-way, linesize 32 bytes. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 26416 [ 0.000000] Kernel command line: console=ttyS1,115200n8 mem=104M@0x0 ispmem=8M@0x6800000 rmem=16M@0x7000000 init=/linuxrc rootfstype=squashfs root=/dev/mtdblock2 rw mtdparts=jz_sfc:256k(boot),2048k(kernel),3392k(root),640k(driver),4736k(appfs),2048k(backupk),640k(backupd),2048k(backupa),256k(config),256k(para),-(flag) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 99300k/106496k available (4024k kernel code, 7196k reserved, 1304k data, 236k init, 0k highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:418 [ 0.000000] clockevents_config_and_register success. [ 0.000024] Calibrating delay loop... 858.52 BogoMIPS (lpj=4292608) [ 0.087753] pid_max: default: 32768 minimum: 301 [ 0.092737] Mount-cache hash table entries: 512 [ 0.097838] Initializing cgroup subsys debug [ 0.102100] Initializing cgroup subsys freezer [ 0.109171] regulator-dummy: no parameters [ 0.113461] NET: Registered protocol family 16 [ 0.135463] bio: create slab at 0 [ 0.141790] jz-dma jz-dma: JZ SoC DMA initialized [ 0.147049] SCSI subsystem initialized [ 0.150980] usbcore: registered new interface driver usbfs [ 0.156555] usbcore: registered new interface driver hub [ 0.161990] usbcore: registered new device driver usb [ 0.167293] i2c-gpio i2c-gpio.1: using pins 57 (SDA) and 58 (SCL) [ 0.173502] (null): set:249 hold:250 dev=100000000 h=500 l=500 [ 0.179650] media: Linux media interface: v0.10 [ 0.184203] Linux video capture interface: v2.00 [ 0.191006] Switching to clocksource jz_clocksource [ 0.195961] cfg80211: Calling CRDA to update world regulatory domain [ 0.203036] jz-dwc2 jz-dwc2: cgu clk gate get error [ 0.207972] jz-dwc2 jz-dwc2: regulator vbus get error [ 0.213058] DWC IN OTG MODE [ 0.366307] sft id =========================off [ 0.370923] dwc2 dwc2: Keep PHY ON [ 0.374316] dwc2 dwc2: Using Buffer DMA mode [ 0.578462] dwc2 dwc2: Core Release: 3.00a [ 0.582584] dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller [ 0.588914] dwc2 dwc2: new USB bus registered, assigned bus number 1 [ 0.596301] hub 1-0:1.0: USB hub found [ 0.600042] hub 1-0:1.0: 1 port detected [ 0.604203] dwc2 dwc2: DWC2 Host Initialized [ 0.608700] NET: Registered protocol family 2 [ 0.613678] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.620704] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.627184] TCP: Hash tables configured (established 1024 bind 1024) [ 0.633636] TCP: reno registered [ 0.636834] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.642790] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.649390] NET: Registered protocol family 1 [ 0.654105] RPC: Registered named UNIX socket transport module. [ 0.660038] RPC: Registered udp transport module. [ 0.664874] RPC: Registered tcp transport module. [ 0.669573] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.676616] freq_udelay_jiffys[0].max_num = 10 [ 0.681044] cpufreq udelay loops_per_jiffy [ 0.685508] dwc2 dwc2: ID PIN CHANGED! [ 0.689288] init DWC as A_HOST [ 0.692373] 12000 59885 59885
[ 0.695633] 24000 119771 119771 [ 0.699057] 60000 299428 299428 [ 0.702612] 120000 598857 598857 [ 0.706068] 200000 998095 998095 [ 0.709599] 300000 1497142 1497142
[ 0.713413] 600000 2994285 2994285
[ 0.717044] 792000 3952457 3952457
[ 0.720752] 1008000 5030400 5030400
[ 0.724573] 1200000 5988571 5988571
[ 0.733941] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.740785] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.747386] msgmni has been set to 193 [ 0.752621] io scheduler noop registered [ 0.756557] io scheduler cfq registered (default) [ 0.763233] jz-uart.1: ttyS1 at MMIO 0x10031000 (irq = 58) is a uart1 [ 0.771424] console [ttyS1] enabled, bootconsole disabled [ 0.786639] brd: module loaded [ 0.791904] loop: module loaded [ 0.796178] zram: Created 2 device(s) ... [ 0.800414] logger: created 256K log 'log_main' [ 0.805821] jz SADC driver registeres over! [ 0.811136] jz TCU driver register completed [ 0.816229] the id code = c84018, the flash name is GD25Q127C [ 0.822193] JZ SFC Controller for SFC channel 0 driver register [ 0.828397] 11 cmdlinepart partitions found on MTD device jz_sfc [ 0.834661] Creating 11 MTD partitions on "jz_sfc": [ 0.839721] 0x000000000000-0x000000040000 : "boot" [ 0.845273] 0x000000040000-0x000000240000 : "kernel" [ 0.850929] 0x000000240000-0x000000590000 : "root" [ 0.856485] 0x000000590000-0x000000630000 : "driver" [ 0.862175] 0x000000630000-0x000000ad0000 : "appfs" [ 0.867844] 0x000000ad0000-0x000000cd0000 : "backupk" [ 0.873668] 0x000000cd0000-0x000000d70000 : "backupd" [ 0.879448] 0x000000d70000-0x000000f70000 : "backupa" [ 0.885297] 0x000000f70000-0x000000fb0000 : "config" [ 0.891037] 0x000000fb0000-0x000000ff0000 : "para" [ 0.896641] 0x000000ff0000-0x000001000000 : "flag" [ 0.902119] SPI NOR MTD LOAD OK [ 0.905496] tun: Universal TUN/TAP device driver, 1.6 [ 0.910731] tun: (C) 1999-2004 Max Krasnyansky [ 0.917291] usbcore: registered new interface driver zd1201 [ 0.923141] usbcore: registered new interface driver r8152 [ 0.928911] usbcore: registered new interface driver usb-storage [ 0.935289] usbcore: registered new interface driver usbserial [ 0.941373] usbcore: registered new interface driver usbserial_generic [ 0.948204] usbserial: USB Serial support registered for generic [ 0.954483] usbcore: registered new interface driver ch341 [ 0.960209] usbserial: USB Serial support registered for ch341-uart [ 0.966761] usbcore: registered new interface driver cp210x [ 0.972585] usbserial: USB Serial support registered for cp210x [ 0.978763] usbcore: registered new interface driver pl2303 [ 0.984585] usbserial: USB Serial support registered for pl2303 [ 1.491691] i8042: i8042 controller selftest timeout [ 1.497348] jzmmc_v1.2 jzmmc_v1.2.0: vmmc regulator missing [ 1.542524] jzmmc_v1.2 jzmmc_v1.2.0: register success! [ 1.547913] jzmmc_v1.2 jzmmc_v1.2.1: vmmc regulator missing [ 1.593446] jzmmc_v1.2 jzmmc_v1.2.1: register success! [ 1.598926] hidraw: raw HID events driver (C) Jiri Kosina [ 1.604812] usbcore: registered new interface driver usbhid [ 1.610589] usbhid: USB HID core driver [ 1.614677] Netfilter messages via NETLINK v0.30. [ 1.619611] nf_conntrack version 0.5.0 (1551 buckets, 6204 max) [ 1.626370] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.631985] TCP: cubic registered [ 1.635470] NET: Registered protocol family 17 [ 1.641084] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.648330] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.660236] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.668040] Freeing unused kernel memory: 236K (80545000 - 80580000) [ 1.795390] dwc2 dwc2: ++OTG Interrupt: A-Device Timeout Change++ [ 3.702413] jzmmc_v1.2 jzmmc_v1.2.0: card inserted, state=0 [ 4.981765] wait stable.[246][cgu_msc0] [ 4.985829] mmc0: new high speed SDHC card at address 59b4 [ 4.994224] mmcblk0: mmc0:59b4 29.8 GiB [ 5.002106] mmcblk0: p1 [ 5.522150] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 6.657530] Unable to find swap-space signature [ 7.059505] RTL871X: module init start [ 7.065654] RTL871X: rtl8189ftv v4.3.24.7_21113.20170208.nova.1.02 [ 7.072067] RTL871X: build time: Jan 24 2018 14:43:26 [ 7.077389] wlan power on [ 7.092849] RTL871X: module init ret=0 [ 7.138398] mmc1: card claims to support voltages below the defined range. These will be ignored. [ 7.171148] mmc1: new SDIO card at address 0001 [ 7.186101] RTL871X: ++++++++rtw_drv_init: vendor=0x024c device=0xf179 class=0x07 [ 7.249436] RTL871X: HW EFUSE [ 7.262464] RTL871X: hal_com_config_channel_plan chplan:0x20 [ 7.452049] RTL871X: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1 [ 7.482749] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=2c:aa:8e:50:9e:a7 [ 10.570551] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008 [ 10.672585] RTL871X: start auth [ 10.679141] RTL871X: auth success, start assoc [ 10.691253] RTL871X: assoc success [ 10.695035] RTL871X: recv eapol packet [ 10.715921] RTL871X: send eapol packet [ 10.725503] RTL871X: recv eapol packet [ 10.731822] RTL871X: send eapol packet [ 10.738837] RTL871X: set pairwise key camid:4, addr:86:83:c2:8d:25:fd, kid:0, type:AES [ 10.750933] RTL871X: set group key camid:5, addr:86:83:c2:8d:25:fd, kid:1, type:AES [ 12.349414] request spk en gpio 63 ok! [ 12.349430] jz_codec_register: probe() successful! [ 12.356668] cgu_set_rate, parent = 860160000, rate = 2048000, n = 420, reg val = 0x000021a4 [ 12.356687] cgu_enable,cgu_i2s reg val = 0x200021a4 [ 12.702816] dma dma0chan24: Channel 24 have been requested.(phy id 7,type 0x06 desc a59b1000) [ 12.712076] dma dma0chan25: Channel 25 have been requested.(phy id 6,type 0x06 desc a598a000) [ 13.759900] motor_probe743 [ 13.778792] name : i2c-gpio1 nr : 1 [ 13.784665] name : i2c0 nr : 0 [ 13.849150] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 13.856315] i2c i2c-0: --I2C txabrt: [ 13.860025] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 13.866636] error: sensor_read,172 ret = -5 [ 13.870970] sensor_read: addr=0xa value = 0x0 [ 13.875586] err sensor read addr = 0xa, value = 0x0 [ 13.940783] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 13.947998] i2c i2c-0: --I2C txabrt: [ 13.951788] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 13.958414] error: sensor_read,172 ret = -5 [ 13.962762] sensor_read: addr=0x300a value = 0x0 [ 13.967636] err sensor read addr = 0x300a, value = 0x0 [ 14.033882] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.041018] i2c i2c-0: --I2C txabrt: [ 14.044744] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.051490] error: sensor_read,172 ret = -5 [ 14.055850] sensor_read: addr=0x300b value = 0x0 [ 14.060784] err sensor read addr = 0x300b, value = 0x0 [ 14.126894] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.134046] i2c i2c-0: --I2C txabrt: [ 14.137756] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.144369] error: sensor_read,172 ret = -5 [ 14.148702] sensor_read: addr=0xa value = 0x0 [ 14.153376] err sensor read addr = 0xa, value = 0x0 [ 14.218660] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.225806] i2c i2c-0: --I2C txabrt: [ 14.229515] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.236124] error: sensor_read,172 ret = -5 [ 14.240457] sensor_read: addr=0x580b value = 0x0 [ 14.245342] err sensor read addr = 0x580b, value = 0x0 [ 14.312402] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.319540] i2c i2c-0: --I2C txabrt: [ 14.323781] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.330840] error: sensor_read,172 ret = -5 [ 14.335214] sensor_read: addr=0x580b value = 0x0 [ 14.340091] err sensor read addr = 0x580b, value = 0x0 [ 14.406612] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.413798] i2c i2c-0: --I2C txabrt: [ 14.417510] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.424141] error: sensor_read,172 ret = -5 [ 14.428474] sensor_read: addr=0x3107 value = 0x0 [ 14.433369] err sensor read addr = 0x3107, value = 0x0 [ 14.499031] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.506181] i2c i2c-0: --I2C txabrt: [ 14.509892] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.516502] error: sensor_read,172 ret = -5 [ 14.520837] sensor_read: addr=0x3107 value = 0x0 [ 14.525776] err sensor read addr = 0x3107, value = 0x0 [ 14.593883] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.601023] i2c i2c-0: --I2C txabrt: [ 14.604747] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.611347] error: sensor_read,172 ret = -5 [ 14.615693] sensor_read: addr=0x3000 value = 0x0 [ 14.620566] err sensor read addr = 0x3000, value = 0x0 [ 14.686282] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.693433] i2c i2c-0: --I2C txabrt: [ 14.697141] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.703775] error: sensor_read,172 ret = -5 [ 14.708108] sensor_read: addr=0xa value = 0x0 [ 14.712727] err sensor read addr = 0xa, value = 0x0 [ 14.778076] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.785227] i2c i2c-0: --I2C txabrt: [ 14.788991] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.796155] error: sensor_read,172 ret = -5 [ 14.800496] sensor_read: addr=0xf0 value = 0x0 [ 14.805226] err sensor read addr = 0xf0, value = 0x0 [ 14.871635] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.879513] i2c i2c-0: --I2C txabrt: [ 14.883327] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.890209] error: sensor_read,172 ret = -5 [ 14.894563] sensor_read: addr=0xf0 value = 0x0 [ 14.899258] err sensor read addr = 0xf0, value = 0x0 [ 14.964560] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 14.971760] i2c i2c-0: --I2C txabrt: [ 14.975581] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 14.982181] error: sensor_read,172 ret = -5 [ 14.986537] sensor_read: addr=0xf0 value = 0x0 [ 14.991231] err sensor read addr = 0xf0, value = 0x0 [ 15.057304] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.064469] i2c i2c-0: --I2C txabrt: [ 15.068179] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.074855] error: sensor_read,172 ret = -5 [ 15.079277] sensor_read: addr=0xfc value = 0x0 [ 15.084054] err sensor read addr = 0xfc, value = 0x0 [ 15.150460] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.157614] i2c i2c-0: --I2C txabrt: [ 15.161324] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.167936] error: sensor_read,172 ret = -5 [ 15.172271] sensor_read: addr=0x3004 value = 0x0 [ 15.177226] err sensor read addr = 0x3004, value = 0x0 [ 15.242807] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.249941] i2c i2c-0: --I2C txabrt: [ 15.253665] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.260264] error: sensor_read,172 ret = -5 [ 15.264611] sensor_read: addr=0x300a value = 0x0 [ 15.269483] err sensor read addr = 0x300a, value = 0x0 [ 15.335748] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.342900] i2c i2c-0: --I2C txabrt: [ 15.346610] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.353768] error: sensor_read,172 ret = -5 [ 15.358105] sensor_read: addr=0x31f3 value = 0x0 [ 15.363010] err sensor read addr = 0x31f3, value = 0x0 [ 15.428654] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.435804] i2c i2c-0: --I2C txabrt: [ 15.439511] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.446123] error: sensor_read,172 ret = -5 [ 15.450458] sensor_read: addr=0x3107 value = 0x0 [ 15.455343] err sensor read addr = 0x3107, value = 0x0 [ 15.520948] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.528097] i2c i2c-0: --I2C txabrt: [ 15.531805] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.538417] error: sensor_read,172 ret = -5 [ 15.542763] sensor_read: addr=0x4 value = 0x0 [ 15.547368] err sensor read addr = 0x4, value = 0x0 [ 15.614362] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.621503] i2c i2c-0: --I2C txabrt: [ 15.625228] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.631828] error: sensor_read,172 ret = -5 [ 15.636176] sensor_read: addr=0xa value = 0x0 [ 15.640781] err sensor read addr = 0xa, value = 0x0 [ 15.706228] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.713376] i2c i2c-0: --I2C txabrt: [ 15.717083] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.723693] error: sensor_read,172 ret = -5 [ 15.728027] sensor_read: addr=0x0 value = 0x0 [ 15.732643] err sensor read addr = 0x0, value = 0x0 [ 15.797977] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.805126] i2c i2c-0: --I2C txabrt: [ 15.808835] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.815448] error: sensor_read,172 ret = -5 [ 15.819781] sensor_read: addr=0x300a value = 0x0 [ 15.824719] err sensor read addr = 0x300a, value = 0x0 [ 15.891649] sensor_read: addr=0xa value = 0xf [ 15.896679] sensor_read: addr=0xb value = 0x23 [ 15.961529] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 15.968674] i2c i2c-0: --I2C txabrt: [ 15.972393] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 15.978993] error: sensor_read,172 ret = -5 [ 15.983339] sensor_read: addr=0x31f3 value = 0x0 [ 15.988214] err sensor read addr = 0x31f3, value = 0x0 [ 16.053859] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 16.060996] i2c i2c-0: --I2C txabrt: [ 16.064718] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 16.071315] error: sensor_read,172 ret = -5 [ 16.075724] sensor_read: addr=0x3008 value = 0x0 [ 16.080853] err sensor read addr = 0x3008, value = 0x0 [ 16.086222] info: failed sensor find [ 16.223058] register all isp device successfully! [ 16.232511] @@@@ tx-isp-probe ok @@@@@ [ 19.493319] name : i2c-gpio1 nr : 1 [ 19.496941] name : i2c0 nr : 0 [ 19.576608] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 19.583983] i2c i2c-0: --I2C txabrt: [ 19.587698] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 19.594338] error: sensor_read,172 ret = -5 [ 19.598673] sensor_read: addr=0xa value = 0x0 [ 19.603293] err sensor read addr = 0xa, value = 0x0 [ 19.668542] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 19.675736] i2c i2c-0: --I2C txabrt: [ 19.679521] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 19.686236] error: sensor_read,172 ret = -5 [ 19.690572] sensor_read: addr=0x300a value = 0x0 [ 19.695470] err sensor read addr = 0x300a, value = 0x0 [ 19.760940] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 19.768086] i2c i2c-0: --I2C txabrt: [ 19.771794] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 19.778403] error: sensor_read,172 ret = -5 [ 19.782809] sensor_read: addr=0x300b value = 0x0 [ 19.787759] err sensor read addr = 0x300b, value = 0x0 [ 19.853245] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 19.860379] i2c i2c-0: --I2C txabrt: [ 19.864102] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 19.870701] error: sensor_read,172 ret = -5 [ 19.875047] sensor_read: addr=0xa value = 0x0 [ 19.879650] err sensor read addr = 0xa, value = 0x0 [ 19.944997] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 19.952131] i2c i2c-0: --I2C txabrt: [ 19.955856] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 19.962466] error: sensor_read,172 ret = -5 [ 19.966800] sensor_read: addr=0x580b value = 0x0 [ 19.971675] err sensor read addr = 0x580b, value = 0x0 [ 20.037288] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 20.044439] i2c i2c-0: --I2C txabrt: [ 20.048149] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 20.054760] error: sensor_read,172 ret = -5 [ 20.059095] sensor_read: addr=0x580b value = 0x0 [ 20.063981] err sensor read addr = 0x580b, value = 0x0 [ 20.129791] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 20.136969] i2c i2c-0: --I2C txabrt: [ 20.140679] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 20.147297] error: sensor_read,172 ret = -5 [ 20.151633] sensor_read: addr=0x3107 value = 0x0 [ 20.156541] err sensor read addr = 0x3107, value = 0x0 [ 20.222225] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 20.229410] i2c i2c-0: --I2C txabrt: [ 20.233139] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 20.239737] error: sensor_read,172 ret = -5 [ 20.244084] sensor_read: addr=0x3107 value = 0x0 [ 20.248957] err sensor read addr = 0x3107, value = 0x0 [ 20.314582] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 20.321717] i2c i2c-0: --I2C txabrt: [ 20.325440] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 20.332039] error: sensor_read,172 ret = -5 [ 20.336386] sensor_read: addr=0x3000 value = 0x0 [ 20.341263] err sensor read addr = 0x3000, value = 0x0 [ 20.422541] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 20.429679] i2c i2c-0: --I2C txabrt: [ 20.433421] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 20.440022] error: sensor_read,172 ret = -5 [ 20.444370] sensor_read: addr=0xa value = 0x0 [ 20.448973] err sensor read addr = 0xa, value = 0x0 [ 20.514373] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 20.521506] i2c i2c-0: --I2C txabrt: [ 20.525231] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 20.531934] error: sensor_read,172 ret = -5 [ 20.536299] sensor_read: addr=0xf0 value = 0x0 [ 20.540994] err sensor read addr = 0xf0, value = 0x0 [ 20.624406] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 20.631544] i2c i2c-0: --I2C txabrt: [ 20.635490] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 20.642092] error: sensor_read,172 ret = -5 [ 20.646482] sensor_read: addr=0xf0 value = 0x0 [ 20.651178] err sensor read addr = 0xf0, value = 0x0 [ 20.716741] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 20.723893] i2c i2c-0: --I2C txabrt: [ 20.727602] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 20.734217] error: sensor_read,172 ret = -5 [ 20.738549] sensor_read: addr=0xf0 value = 0x0 [ 20.743256] err sensor read addr = 0xf0, value = 0x0 [ 20.808678] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 20.815834] i2c i2c-0: --I2C txabrt: [ 20.819544] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 20.826156] error: sensor_read,172 ret = -5 [ 20.830490] sensor_read: addr=0xfc value = 0x0 [ 20.835194] err sensor read addr = 0xfc, value = 0x0 [ 20.901550] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 20.908762] i2c i2c-0: --I2C txabrt: [ 20.912574] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 20.919178] error: sensor_read,172 ret = -5 [ 20.923535] sensor_read: addr=0x3004 value = 0x0 [ 20.928412] err sensor read addr = 0x3004, value = 0x0 [ 20.993892] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 21.001024] i2c i2c-0: --I2C txabrt: [ 21.004750] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 21.011488] error: sensor_read,172 ret = -5 [ 21.015847] sensor_read: addr=0x300a value = 0x0 [ 21.020724] err sensor read addr = 0x300a, value = 0x0 [ 21.086206] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 21.093463] i2c i2c-0: --I2C txabrt: [ 21.097174] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 21.103810] error: sensor_read,172 ret = -5 [ 21.108146] sensor_read: addr=0x31f3 value = 0x0 [ 21.113174] err sensor read addr = 0x31f3, value = 0x0 [ 21.178861] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 21.186012] i2c i2c-0: --I2C txabrt: [ 21.189721] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 21.196333] error: sensor_read,172 ret = -5 [ 21.200667] sensor_read: addr=0x3107 value = 0x0 [ 21.205555] err sensor read addr = 0x3107, value = 0x0 [ 21.271179] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 21.278328] i2c i2c-0: --I2C txabrt: [ 21.282037] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 21.288647] error: sensor_read,172 ret = -5 [ 21.292993] sensor_read: addr=0x4 value = 0x0 [ 21.297599] err sensor read addr = 0x4, value = 0x0 [ 21.362939] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 21.370074] i2c i2c-0: --I2C txabrt: [ 21.373798] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 21.380397] error: sensor_read,172 ret = -5 [ 21.384741] sensor_read: addr=0xa value = 0x0 [ 21.389343] err sensor read addr = 0xa, value = 0x0 [ 21.454991] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 21.462128] i2c i2c-0: --I2C txabrt: [ 21.465851] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 21.472463] error: sensor_read,172 ret = -5 [ 21.476799] sensor_read: addr=0x0 value = 0x0 [ 21.481402] err sensor read addr = 0x0, value = 0x0 [ 21.546611] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 21.553757] i2c i2c-0: --I2C txabrt: [ 21.557467] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 21.564075] error: sensor_read,172 ret = -5 [ 21.568409] sensor_read: addr=0x300a value = 0x0 [ 21.573295] err sensor read addr = 0x300a, value = 0x0 [ 21.657195] sensor_read: addr=0xa value = 0xf [ 21.662293] sensor_read: addr=0xb value = 0x23 [ 21.727693] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 21.734857] i2c i2c-0: --I2C txabrt: [ 21.738567] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 21.745181] error: sensor_read,172 ret = -5 [ 21.749517] sensor_read: addr=0x31f3 value = 0x0 [ 21.754402] err sensor read addr = 0x31f3, value = 0x0 [ 21.819871] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 21.827192] i2c i2c-0: --I2C txabrt: [ 21.830903] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 21.837527] error: sensor_read,172 ret = -5 [ 21.841863] sensor_read: addr=0x3008 value = 0x0 [ 21.846752] err sensor read addr = 0x3008, value = 0x0 [ 21.852082] info: failed sensor find [ 21.856140] misc sinfo_release [ 21.862220] set sensor gpio as PA-low-10bit [ 21.868662] probe ok ------->jxf23 [ 22.019496] -----jxf23_detect: 529 ret = 0, v = 0x0f [ 22.019912] -----jxf23_detect: 537 ret = 0, v = 0x23 [ 22.019926] jxf23 0-0040: jxf23 chip found @ 0x40 (i2c0) [ 22.025455] tx_isp: Registered sensor subdevice jxf23 0-0040 [ 22.031384] do not support ctrl->cmd ====1 [ 22.031402] do not support ctrl->cmd ====0 [ 22.038978] do not support ctrl->cmd ====1 [ 22.313267] do not support ctrl->cmd ====1 [ 22.314254] jxf23 stream on [ 22.346734] ###### image_tuning_v4l2_open 4219 ####### [ 22.374051] &&& chan1 scaler.max_width = 1920 max_height = 1080 min_width = 128 min_height = 128 &&& [ 55.707430] jxf23 stream off [ 55.712970] do not support ctrl->cmd ====0 [ 57.197821] name : i2c-gpio1 nr : 1 [ 57.201443] name : i2c0 nr : 0 [ 57.265290] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 57.272430] i2c i2c-0: --I2C txabrt: [ 57.276157] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 57.282771] error: sensor_read,172 ret = -5 [ 57.287102] sensor_read: addr=0xa value = 0x0 [ 57.291707] err sensor read addr = 0xa, value = 0x0 [ 57.357132] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 57.364284] i2c i2c-0: --I2C txabrt: [ 57.367992] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 57.374603] error: sensor_read,172 ret = -5 [ 57.378938] sensor_read: addr=0x300a value = 0x0 [ 57.383823] err sensor read addr = 0x300a, value = 0x0 [ 57.449711] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 57.456888] i2c i2c-0: --I2C txabrt: [ 57.460597] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 57.467218] error: sensor_read,172 ret = -5 [ 57.471552] sensor_read: addr=0x300b value = 0x0 [ 57.476440] err sensor read addr = 0x300b, value = 0x0 [ 57.541910] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 57.549122] i2c i2c-0: --I2C txabrt: [ 57.552930] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 57.559531] error: sensor_read,172 ret = -5 [ 57.563886] sensor_read: addr=0xa value = 0x0 [ 57.568491] err sensor read addr = 0xa, value = 0x0 [ 57.633742] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 57.640875] i2c i2c-0: --I2C txabrt: [ 57.644662] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 57.651340] error: sensor_read,172 ret = -5 [ 57.655699] sensor_read: addr=0x580b value = 0x0 [ 57.660574] err sensor read addr = 0x580b, value = 0x0 [ 57.726108] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 57.733255] i2c i2c-0: --I2C txabrt: [ 57.736963] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 57.743572] error: sensor_read,172 ret = -5 [ 57.747970] sensor_read: addr=0x580b value = 0x0 [ 57.752940] err sensor read addr = 0x580b, value = 0x0 [ 57.818419] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 57.825566] i2c i2c-0: --I2C txabrt: [ 57.829274] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 57.835884] error: sensor_read,172 ret = -5 [ 57.840218] sensor_read: addr=0x3107 value = 0x0 [ 57.845104] err sensor read addr = 0x3107, value = 0x0 [ 57.910698] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 57.917845] i2c i2c-0: --I2C txabrt: [ 57.921553] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 57.928220] error: sensor_read,172 ret = -5 [ 57.934236] sensor_read: addr=0x3107 value = 0x0 [ 57.939119] err sensor read addr = 0x3107, value = 0x0 [ 58.119402] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 58.131161] i2c i2c-0: --I2C txabrt: [ 58.134985] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 58.141959] error: sensor_read,172 ret = -5 [ 58.146419] sensor_read: addr=0x3000 value = 0x0 [ 58.151513] err sensor read addr = 0x3000, value = 0x0 [ 58.217562] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 58.224721] i2c i2c-0: --I2C txabrt: [ 58.228429] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 58.235043] error: sensor_read,172 ret = -5 [ 58.239377] sensor_read: addr=0xa value = 0x0 [ 58.243993] err sensor read addr = 0xa, value = 0x0 [ 58.309369] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 58.316517] i2c i2c-0: --I2C txabrt: [ 58.320227] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 58.326837] error: sensor_read,172 ret = -5 [ 58.331169] sensor_read: addr=0xf0 value = 0x0 [ 58.335875] err sensor read addr = 0xf0, value = 0x0 [ 58.401313] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 58.408463] i2c i2c-0: --I2C txabrt: [ 58.412173] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 58.418784] error: sensor_read,172 ret = -5 [ 58.423128] sensor_read: addr=0xf0 value = 0x0 [ 58.427823] err sensor read addr = 0xf0, value = 0x0 [ 58.493562] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 58.500699] i2c i2c-0: --I2C txabrt: [ 58.504425] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 58.511027] error: sensor_read,172 ret = -5 [ 58.515375] sensor_read: addr=0xf0 value = 0x0 [ 58.520068] err sensor read addr = 0xf0, value = 0x0 [ 58.585516] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 58.592665] i2c i2c-0: --I2C txabrt: [ 58.596373] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 58.602983] error: sensor_read,172 ret = -5 [ 58.607317] sensor_read: addr=0xfc value = 0x0 [ 58.612012] err sensor read addr = 0xfc, value = 0x0 [ 58.677508] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 58.684666] i2c i2c-0: --I2C txabrt: [ 58.688376] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 58.694988] error: sensor_read,172 ret = -5 [ 58.699321] sensor_read: addr=0x3004 value = 0x0 [ 58.704208] err sensor read addr = 0x3004, value = 0x0 [ 58.769680] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 58.776893] i2c i2c-0: --I2C txabrt: [ 58.780688] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 58.787317] error: sensor_read,172 ret = -5 [ 58.791652] sensor_read: addr=0x300a value = 0x0 [ 58.796538] err sensor read addr = 0x300a, value = 0x0 [ 58.862009] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 58.869155] i2c i2c-0: --I2C txabrt: [ 58.873956] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 58.880561] error: sensor_read,172 ret = -5 [ 58.884926] sensor_read: addr=0x31f3 value = 0x0 [ 58.889802] err sensor read addr = 0x31f3, value = 0x0 [ 58.955290] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 58.962421] i2c i2c-0: --I2C txabrt: [ 58.966145] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 58.972757] error: sensor_read,172 ret = -5 [ 58.977160] sensor_read: addr=0x3107 value = 0x0 [ 58.982118] err sensor read addr = 0x3107, value = 0x0 [ 59.047617] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 59.054765] i2c i2c-0: --I2C txabrt: [ 59.058473] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 59.065084] error: sensor_read,172 ret = -5 [ 59.069417] sensor_read: addr=0x4 value = 0x0 [ 59.074033] err sensor read addr = 0x4, value = 0x0 [ 59.139331] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 59.146483] i2c i2c-0: --I2C txabrt: [ 59.150192] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 59.156889] error: sensor_read,172 ret = -5 [ 59.162768] sensor_read: addr=0xa value = 0x0 [ 59.167381] err sensor read addr = 0xa, value = 0x0 [ 59.344355] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 59.352959] i2c i2c-0: --I2C txabrt: [ 59.356991] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 59.363948] error: sensor_read,172 ret = -5 [ 59.368674] sensor_read: addr=0x0 value = 0x0 [ 59.373683] err sensor read addr = 0x0, value = 0x0 [ 59.440444] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 59.447621] i2c i2c-0: --I2C txabrt: [ 59.451334] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 59.457978] error: sensor_read,172 ret = -5 [ 59.462312] sensor_read: addr=0x300a value = 0x0 [ 59.467224] err sensor read addr = 0x300a, value = 0x0 [ 59.533153] sensor_read: addr=0xa value = 0xf [ 59.538161] sensor_read: addr=0xb value = 0x23 [ 59.603167] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 59.610301] i2c i2c-0: --I2C txabrt: [ 59.614027] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 59.620627] error: sensor_read,172 ret = -5 [ 59.624973] sensor_read: addr=0x31f3 value = 0x0 [ 59.629847] err sensor read addr = 0x31f3, value = 0x0 [ 59.695547] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 59.702698] i2c i2c-0: --I2C txabrt: [ 59.706407] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 59.713020] error: sensor_read,172 ret = -5 [ 59.717352] sensor_read: addr=0x3008 value = 0x0 [ 59.722227] err sensor read addr = 0x3008, value = 0x0 [ 59.727571] info: failed sensor find [ 59.731621] misc sinfo_release [ 59.737794] set sensor gpio as PA-low-10bit [ 59.742144] probe ok ------->jxf23 [ 59.895105] -----jxf23_detect: 529 ret = 0, v = 0x0f [ 59.895523] -----jxf23_detect: 537 ret = 0, v = 0x23 [ 59.895537] jxf23 0-0040: jxf23 chip found @ 0x40 (i2c0) [ 59.901103] tx_isp: Registered sensor subdevice jxf23 0-0040 [ 59.907132] do not support ctrl->cmd ====1 [ 59.907152] do not support ctrl->cmd ====0 [ 59.910621] do not support ctrl->cmd ====1 [ 60.184883] do not support ctrl->cmd ====1 [ 60.185702] jxf23 stream on [ 60.214163] ###### image_tuning_v4l2_open 4219 ####### [ 60.242326] &&& chan1 scaler.max_width = 1920 max_height = 1080 min_width = 128 min_height = 128 &&& [ 996.971086] RTL871X: recv eapol packet [ 996.990286] RTL871X: send eapol packet [ 996.994752] RTL871X: set group key camid:6, addr:86:83:c2:8d:25:fd, kid:2, type:AES [ 1126.138634] jxf23 stream off [ 1126.141449] do not support ctrl->cmd ====0 [ 1126.416441] name : i2c-gpio1 nr : 1 [ 1126.420065] name : i2c0 nr : 0 [ 1126.484320] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1126.491478] i2c i2c-0: --I2C txabrt: [ 1126.495188] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1126.502067] error: sensor_read,172 ret = -5 [ 1126.506404] sensor_read: addr=0xa value = 0x0 [ 1126.511010] err sensor read addr = 0xa, value = 0x0 [ 1126.576378] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1126.583558] i2c i2c-0: --I2C txabrt: [ 1126.587268] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1126.593888] error: sensor_read,172 ret = -5 [ 1126.598223] sensor_read: addr=0x300a value = 0x0 [ 1126.603110] err sensor read addr = 0x300a, value = 0x0 [ 1126.668724] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1126.675872] i2c i2c-0: --I2C txabrt: [ 1126.679582] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1126.686196] error: sensor_read,172 ret = -5 [ 1126.690530] sensor_read: addr=0x300b value = 0x0 [ 1126.695466] err sensor read addr = 0x300b, value = 0x0 [ 1126.761091] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1126.768242] i2c i2c-0: --I2C txabrt: [ 1126.771964] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1126.778563] error: sensor_read,172 ret = -5 [ 1126.782912] sensor_read: addr=0xa value = 0x0 [ 1126.787514] err sensor read addr = 0xa, value = 0x0 [ 1126.853072] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1126.860210] i2c i2c-0: --I2C txabrt: [ 1126.863938] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1126.870539] error: sensor_read,172 ret = -5 [ 1126.874888] sensor_read: addr=0x580b value = 0x0 [ 1126.879762] err sensor read addr = 0x580b, value = 0x0 [ 1126.946176] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1126.953394] i2c i2c-0: --I2C txabrt: [ 1126.957195] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1126.963824] error: sensor_read,172 ret = -5 [ 1126.968162] sensor_read: addr=0x580b value = 0x0 [ 1126.973050] err sensor read addr = 0x580b, value = 0x0 [ 1127.038524] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1127.045672] i2c i2c-0: --I2C txabrt: [ 1127.049381] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1127.056061] error: sensor_read,172 ret = -5 [ 1127.060472] sensor_read: addr=0x3107 value = 0x0 [ 1127.065372] err sensor read addr = 0x3107, value = 0x0 [ 1127.130845] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1127.138025] i2c i2c-0: --I2C txabrt: [ 1127.141752] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1127.148385] error: sensor_read,172 ret = -5 [ 1127.152739] sensor_read: addr=0x3107 value = 0x0 [ 1127.157681] err sensor read addr = 0x3107, value = 0x0 [ 1127.223564] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1127.230703] i2c i2c-0: --I2C txabrt: [ 1127.234430] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1127.241029] error: sensor_read,172 ret = -5 [ 1127.245377] sensor_read: addr=0x3000 value = 0x0 [ 1127.250254] err sensor read addr = 0x3000, value = 0x0 [ 1127.315919] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1127.323069] i2c i2c-0: --I2C txabrt: [ 1127.326777] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1127.333389] error: sensor_read,172 ret = -5 [ 1127.337722] sensor_read: addr=0xa value = 0x0 [ 1127.342339] err sensor read addr = 0xa, value = 0x0 [ 1127.407751] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1127.414905] i2c i2c-0: --I2C txabrt: [ 1127.418613] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1127.425225] error: sensor_read,172 ret = -5 [ 1127.429561] sensor_read: addr=0xf0 value = 0x0 [ 1127.434269] err sensor read addr = 0xf0, value = 0x0 [ 1127.499713] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1127.506863] i2c i2c-0: --I2C txabrt: [ 1127.510573] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1127.517184] error: sensor_read,172 ret = -5 [ 1127.521531] sensor_read: addr=0xf0 value = 0x0 [ 1127.526224] err sensor read addr = 0xf0, value = 0x0 [ 1127.591673] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1127.598808] i2c i2c-0: --I2C txabrt: [ 1127.602532] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1127.609130] error: sensor_read,172 ret = -5 [ 1127.613476] sensor_read: addr=0xf0 value = 0x0 [ 1127.618169] err sensor read addr = 0xf0, value = 0x0 [ 1127.683605] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1127.690740] i2c i2c-0: --I2C txabrt: [ 1127.694519] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1127.701121] error: sensor_read,172 ret = -5 [ 1127.705473] sensor_read: addr=0xfc value = 0x0 [ 1127.710167] err sensor read addr = 0xfc, value = 0x0 [ 1127.775617] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1127.782766] i2c i2c-0: --I2C txabrt: [ 1127.786474] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1127.793085] error: sensor_read,172 ret = -5 [ 1127.797419] sensor_read: addr=0x3004 value = 0x0 [ 1127.802306] err sensor read addr = 0x3004, value = 0x0 [ 1127.867771] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1127.874975] i2c i2c-0: --I2C txabrt: [ 1127.878758] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1127.885381] error: sensor_read,172 ret = -5 [ 1127.889714] sensor_read: addr=0x300a value = 0x0 [ 1127.894602] err sensor read addr = 0x300a, value = 0x0 [ 1127.960076] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1127.967220] i2c i2c-0: --I2C txabrt: [ 1127.970929] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1127.977601] error: sensor_read,172 ret = -5 [ 1127.982025] sensor_read: addr=0x31f3 value = 0x0 [ 1127.986900] err sensor read addr = 0x31f3, value = 0x0 [ 1128.052402] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1128.059534] i2c i2c-0: --I2C txabrt: [ 1128.063258] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1128.069858] error: sensor_read,172 ret = -5 [ 1128.074206] sensor_read: addr=0x3107 value = 0x0 [ 1128.079142] err sensor read addr = 0x3107, value = 0x0 [ 1128.144728] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1128.151877] i2c i2c-0: --I2C txabrt: [ 1128.155584] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1128.162196] error: sensor_read,172 ret = -5 [ 1128.166530] sensor_read: addr=0x4 value = 0x0 [ 1128.171132] err sensor read addr = 0x4, value = 0x0 [ 1128.236768] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1128.243921] i2c i2c-0: --I2C txabrt: [ 1128.247630] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1128.254244] error: sensor_read,172 ret = -5 [ 1128.258579] sensor_read: addr=0xa value = 0x0 [ 1128.263197] err sensor read addr = 0xa, value = 0x0 [ 1128.328559] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1128.335708] i2c i2c-0: --I2C txabrt: [ 1128.339419] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1128.346030] error: sensor_read,172 ret = -5 [ 1128.350362] sensor_read: addr=0x0 value = 0x0 [ 1128.354980] err sensor read addr = 0x0, value = 0x0 [ 1128.422302] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1128.429450] i2c i2c-0: --I2C txabrt: [ 1128.433178] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1128.439995] error: sensor_read,172 ret = -5 [ 1128.444364] sensor_read: addr=0x300a value = 0x0 [ 1128.449242] err sensor read addr = 0x300a, value = 0x0 [ 1128.515170] sensor_read: addr=0xa value = 0xf [ 1128.520183] sensor_read: addr=0xb value = 0x23 [ 1128.585047] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1128.592263] i2c i2c-0: --I2C txabrt: [ 1128.596057] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1128.602688] error: sensor_read,172 ret = -5 [ 1128.607023] sensor_read: addr=0x31f3 value = 0x0 [ 1128.611911] err sensor read addr = 0x31f3, value = 0x0 [ 1128.677381] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 1128.684527] i2c i2c-0: --I2C txabrt: [ 1128.688237] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 1128.695038] error: sensor_read,172 ret = -5 [ 1128.699375] sensor_read: addr=0x3008 value = 0x0 [ 1128.704280] err sensor read addr = 0x3008, value = 0x0 [ 1128.709610] info: failed sensor find [ 1128.713671] misc sinfo_release [ 1128.719753] set sensor gpio as PA-low-10bit [ 1128.726201] probe ok ------->jxf23 [ 1128.877051] -----jxf23_detect: 529 ret = 0, v = 0x0f [ 1128.877469] -----jxf23_detect: 537 ret = 0, v = 0x23 [ 1128.877483] jxf23 0-0040: jxf23 chip found @ 0x40 (i2c0) [ 1128.883013] tx_isp: Registered sensor subdevice jxf23 0-0040 [ 1128.888941] do not support ctrl->cmd ====1 [ 1128.888959] do not support ctrl->cmd ====0 [ 1128.892536] do not support ctrl->cmd ====1 [ 1129.166991] do not support ctrl->cmd ====1 [ 1129.167810] jxf23 stream on [ 1129.196569] ###### image_tuning_v4l2_open 4219 ####### [ 1129.225256] &&& chan1 scaler.max_width = 1920 max_height = 1080 min_width = 128 min_height = 128 &&&

* logcat

Content of logcat

I/OSD ( 681): IMP_OSD_SetPoolSize:409600 I/Encoder ( 681): IMP_Encoder_SetPoolSize:1048576 D/IMP-ISP ( 681): ~~ IMP_ISP_Open[267] ~~~ I/NCU ( 681): NCU Debug mode:0 E/NCU ( 681): open /etc/sensor/jxf23_nd.bin failed: No such file or directory D/System ( 681): IMP_System_Init SDK Version:3.12.0-6f2a7d4 built: Mar 20 2018 18:53:49 D/System ( 681): system_init() D/System ( 681): Calling DSystem D/System ( 681): Calling FrameSource D/System ( 681): [ignored]read /proc/cpuinfo ret is NULL D/System ( 681): Calling IVS D/System ( 681): Calling OSD I/Alloc Manager( 681): MEM Alloc Method is kmalloc D/KMEM Method( 681): CMD Line Rmem Size:16777216, Addr:0x07000000 D/KMEM Method( 681): alloc->mem_alloc.method = kmalloc D/KMEM Method( 681): alloc->mem_alloc.vaddr = 0x75844000 D/KMEM Method( 681): alloc->mem_alloc.paddr = 0x07000000 D/KMEM Method( 681): alloc->mem_alloc.length = 16777216 I/Alloc Manager( 681): MEM Manager Method is continuous D/System ( 681): Calling Encoder I/Encoder ( 681): IMP Alloc BS Buf size:1048576 D/Encoder ( 681): ispmem Size:8388608, Addr:0x06800000 I/Encoder ( 681): bank-0 paddr=06800000 vaddr=75044000 size=7172608 I/Encoder ( 681): bank-1 paddr=06ed7200 vaddr=7571b200 size=1216000 D/System ( 681): Calling Decoder D/System ( 681): Calling FB D/Encoder ( 681): channel-1 buffer malloc size=2164224 addr=0x72618008 D/Encoder ( 681): channel-0 buffer malloc size=6492672 addr=0x71dcf008 I/Encoder ( 681): chn-0 NCU Info vaddr=75044000 paddr=06800000 size=729600 backv=750f6200 backp=068b2200 outv=7525a600 outp=06a16600 total_size=3648000 D/System ( 681): system_bind(): bind DST-OSD-0(4.0.0) to SRC-Framesource-0(0.0.0) D/System ( 681): system_bind(): bind DST-Encoder-0(1.0.0) to SRC-OSD-0(4.0.0) D/System ( 681): system_bind(): bind DST-Encoder-0(1.0.0) to SRC-Framesource-0(0.0.0) D/System ( 681): system_bind(): bind DST-IVS-0(3.0.0) to SRC-Framesource-0(0.0.0) I/Framesource( 681): [chn0]: width = 1600 height = 900 E/VBM ( 681): VBMCreatePool()-0: w=1600 h=900 f=842094158 E/VBM ( 681): VBMCreatePool()-0: pool->config.fmt.fmt.pix.sizeimage=2160000 sizeimage=2188800 E/VBM ( 681): VBMCreatePool()-0: sizeimage=2188800 I/VBM ( 681): PoolId:0, frame=0x927980, frame->priv=0x9279a8, frame[0].virAddr=75e30000, frame[0].phyAddr=75ec000 I/VBM ( 681): PoolId:0, frame=0x9279b0, frame->priv=0x9279d8, frame[1].virAddr=76046600, frame[1].phyAddr=7802600 I/Encoder ( 681): framePriv->i_fps_num=25, framePriv->i_fps_den=1 I/OSD ( 1133): IMP_OSD_SetPoolSize:409600 I/Encoder ( 1133): IMP_Encoder_SetPoolSize:1048576 D/IMP-ISP ( 1133): ~~ IMP_ISP_Open[267] ~~~ I/NCU ( 1133): NCU Debug mode:0 E/NCU ( 1133): open /etc/sensor/jxf23_nd.bin failed: No such file or directory D/System ( 1133): IMP_System_Init SDK Version:3.12.0-6f2a7d4 built: Mar 20 2018 18:53:49 D/System ( 1133): system_init() D/System ( 1133): Calling DSystem D/System ( 1133): Calling FrameSource D/System ( 1133): [ignored]read /proc/cpuinfo ret is NULL D/System ( 1133): Calling IVS D/System ( 1133): Calling OSD I/Alloc Manager( 1133): MEM Alloc Method is kmalloc D/KMEM Method( 1133): CMD Line Rmem Size:16777216, Addr:0x07000000 D/KMEM Method( 1133): alloc->mem_alloc.method = kmalloc D/KMEM Method( 1133): alloc->mem_alloc.vaddr = 0x7589c000 D/KMEM Method( 1133): alloc->mem_alloc.paddr = 0x07000000 D/KMEM Method( 1133): alloc->mem_alloc.length = 16777216 I/Alloc Manager( 1133): MEM Manager Method is continuous D/System ( 1133): Calling Encoder I/Encoder ( 1133): IMP Alloc BS Buf size:1048576 D/Encoder ( 1133): ispmem Size:8388608, Addr:0x06800000 I/Encoder ( 1133): bank-0 paddr=06800000 vaddr=7509c000 size=7172608 I/Encoder ( 1133): bank-1 paddr=06ed7200 vaddr=75773200 size=1216000 D/System ( 1133): Calling Decoder D/System ( 1133): Calling FB D/Encoder ( 1133): channel-1 buffer malloc size=2164224 addr=0x72670008 D/Encoder ( 1133): channel-0 buffer malloc size=6492672 addr=0x71e27008 I/Encoder ( 1133): chn-0 NCU Info vaddr=7509c000 paddr=06800000 size=729600 backv=7514e200 backp=068b2200 outv=752b2600 outp=06a16600 total_size=3648000 D/System ( 1133): system_bind(): bind DST-OSD-0(4.0.0) to SRC-Framesource-0(0.0.0) D/System ( 1133): system_bind(): bind DST-Encoder-0(1.0.0) to SRC-OSD-0(4.0.0) D/System ( 1133): system_bind(): bind DST-Encoder-0(1.0.0) to SRC-Framesource-0(0.0.0) D/System ( 1133): system_bind(): bind DST-IVS-0(3.0.0) to SRC-Framesource-0(0.0.0) I/Framesource( 1133): [chn0]: width = 1600 height = 900 E/VBM ( 1133): VBMCreatePool()-0: w=1600 h=900 f=842094158 E/VBM ( 1133): VBMCreatePool()-0: pool->config.fmt.fmt.pix.sizeimage=2160000 sizeimage=2188800 E/VBM ( 1133): VBMCreatePool()-0: sizeimage=2188800 I/VBM ( 1133): PoolId:0, frame=0xd72838, frame->priv=0xd72860, frame[0].virAddr=75e88000, frame[0].phyAddr=75ec000 I/VBM ( 1133): PoolId:0, frame=0xd72868, frame->priv=0xd72890, frame[1].virAddr=7609e600, frame[1].phyAddr=7802600 I/Encoder ( 1133): framePriv->i_fps_num=25, framePriv->i_fps_den=1 I/OSD ( 3617): IMP_OSD_SetPoolSize:409600 I/Encoder ( 3617): IMP_Encoder_SetPoolSize:1048576 D/IMP-ISP ( 3617): ~~ IMP_ISP_Open[267] ~~~ I/NCU ( 3617): NCU Debug mode:0 E/NCU ( 3617): open /etc/sensor/jxf23_nd.bin failed: No such file or directory D/System ( 3617): IMP_System_Init SDK Version:3.12.0-6f2a7d4 built: Mar 20 2018 18:53:49 D/System ( 3617): system_init() D/System ( 3617): Calling DSystem D/System ( 3617): Calling FrameSource D/System ( 3617): [ignored]read /proc/cpuinfo ret is NULL D/System ( 3617): Calling IVS D/System ( 3617): Calling OSD I/Alloc Manager( 3617): MEM Alloc Method is kmalloc D/KMEM Method( 3617): CMD Line Rmem Size:16777216, Addr:0x07000000 D/KMEM Method( 3617): alloc->mem_alloc.method = kmalloc D/KMEM Method( 3617): alloc->mem_alloc.vaddr = 0x76083000 D/KMEM Method( 3617): alloc->mem_alloc.paddr = 0x07000000 D/KMEM Method( 3617): alloc->mem_alloc.length = 16777216 I/Alloc Manager( 3617): MEM Manager Method is continuous D/System ( 3617): Calling Encoder I/Encoder ( 3617): IMP Alloc BS Buf size:1048576 D/Encoder ( 3617): ispmem Size:8388608, Addr:0x06800000 I/Encoder ( 3617): bank-0 paddr=06800000 vaddr=75883000 size=7172608 I/Encoder ( 3617): bank-1 paddr=06ed7200 vaddr=75f5a200 size=1216000 D/System ( 3617): Calling Decoder D/System ( 3617): Calling FB D/Encoder ( 3617): channel-1 buffer malloc size=2164224 addr=0x72e57008 D/Encoder ( 3617): channel-0 buffer malloc size=6492672 addr=0x7260e008 I/Encoder ( 3617): chn-0 NCU Info vaddr=75883000 paddr=06800000 size=729600 backv=75935200 backp=068b2200 outv=75a99600 outp=06a16600 total_size=3648000 D/System ( 3617): system_bind(): bind DST-OSD-0(4.0.0) to SRC-Framesource-0(0.0.0) D/System ( 3617): system_bind(): bind DST-Encoder-0(1.0.0) to SRC-OSD-0(4.0.0) D/System ( 3617): system_bind(): bind DST-Encoder-0(1.0.0) to SRC-Framesource-0(0.0.0) D/System ( 3617): system_bind(): bind DST-IVS-0(3.0.0) to SRC-Framesource-0(0.0.0) I/Framesource( 3617): [chn0]: width = 1600 height = 900 E/VBM ( 3617): VBMCreatePool()-0: w=1600 h=900 f=842094158 E/VBM ( 3617): VBMCreatePool()-0: pool->config.fmt.fmt.pix.sizeimage=2160000 sizeimage=2188800 E/VBM ( 3617): VBMCreatePool()-0: sizeimage=2188800 I/VBM ( 3617): PoolId:0, frame=0xada538, frame->priv=0xada560, frame[0].virAddr=7666f000, frame[0].phyAddr=75ec000 I/VBM ( 3617): PoolId:0, frame=0xada568, frame->priv=0xada590, frame[1].virAddr=76885600, frame[1].phyAddr=7802600 I/Encoder ( 3617): framePriv->i_fps_num=25, framePriv->i_fps_den=1

* video server 

Content of v4l2rtspserver-master.log

(Doesn't say anything else)

* screenshots

![glitch](https://user-images.githubusercontent.com/1100001/95684139-4aa80700-0ba4-11eb-9e36-e9d0ecc1f291.jpg)

![glitch2](https://user-images.githubusercontent.com/1100001/95684143-50055180-0ba4-11eb-8f30-910422aaeba5.jpg)

### Contribute Back

If your issue was resolved, please consider contributing back to the project by creating a pull request to improve the code or documentation in order to avoid that this issue arises again for other people.

[iankaufmann]

Another thing that I have noticed that is very strange:

I have 3 of these Wyzecam V2's, all running the latest Dafang Hacks.

They are in different areas, and are each connected to a different access point.

Somehow, once in a while (every hour or two) they will all go unavailable in Blue Iris at the exact same time, for the same duration (20-30 seconds), then come back. I know it's not a network issue because I have 2 Amcrest wifi cameras and a Nelly's DB2 doorbell and they can go a month without ever having a connection drop in Blue Iris.

I also wanted to add that I'm not necessarily expecting an answer or support here, just wanted to report what is going on to those who are still supporting this project. Hopefully you will find it useful.

I completely understand the limitations of these Wyze cams, and that they're simply never going to be working reliably enough for this application. I've been messing with these for over a year and trying to optimize them, but they've been relegated to the "unimportant" stuff as I've been slowly replacing them with better cameras.

Thanks

[iankaufmann]

For anyone who finds this that is having the same issue:

I read elsewhere that turning off "Decoder compatibility mode" within Blue Iris fixes the glitching issue.

It totally worked! The artifacts from my screenshots have stopped and I haven't seen a single glitch in 2 days. (It usually generates a clip/alert when it happens if the glitch is in one of the motion zones)

However, I still have the problem where they drop off the network quite often. I now have 3 amcrest wifi cameras and 4 wyze cameras. Blue Iris keeps track of "No Signal" events... in the last 24 hours, all of the amcrests have zero no signal events, while the wyze cameras each have anywhere from 60-400.

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

[ryaske]

Pretty sure this is because of the quality of the camera and limited processing capabilities. It just cant handle what we are asking of it, and the symptoms are why/how its possible to fit the price point. Just wish there was a way to prove it.

It's like the wifi chip cant handle some type of broadcast or something, and loses its mind for the 20 seconds or so it takes to gather itself back again. I can see this clearly when viewing the RTSP feed in VLC. I found it got a little better if I use FixedQP instead of the VBR I was using prior

[int2018]

Hallo everyone,

I only observe the "green image" issue when the transfer rate of the WLAN connection between the camera and the access point is poor. I have a Dafang3 running at about 50/60 MBit down/upload speed and I don't see any green images or breaks. With the same setup in another place with a different access point with only 23/4 MBit I get green images and stream breaks after 2-5 seconds. So, check your WLAN connection or reduce the quality of the rtsp stream.

With this settings I get a running rtsp stream:

Ok, that is not good for real surveillance but from there you can work your way up. Increase the image size and/or the bitrate step by step and see what you can get in your WLAN environment. I did not change the audio settings but reducing that may help too. And yes, the camera hardware can only do so much, so don't expect 4k@60 fps :-)

Stay healthy and keep distance. This cam helps :-)

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.