search

EliasKotlyar / Xiaomi-Dafang-Hacks

4.19k stars 1k forks source link

Dafang DF3 cam unable to connect WIFI router [cat: can't open '/var/run/wpa_action.pid': No such file or directory /system/sdcard/scripts/wifi.sh: wait: line 54: Illegal number: ] #1782

Closed NickNameNemo closed 3 years ago

NickNameNemo commented 3 years ago

Hello, I trying to modify my Dafang cam [DF3 CMIIT ID: 2017DP3894] with custom FW but have issue with unable to connect to my wifi router. I tying to upload CFW-Binary [cfw-1.3.bin] to the cam, change wpa_supplicant.conf several time, Also spend hours to read issues but have`t found reason of the problem. sturtup log file at the end says : "cat: can't open '/var/run/wpa_action.pid': No such file or directory /system/sdcard/scripts/wifi.sh: wait: line 54: Illegal number: "

Any help will be appreciated! Thank you.

Plese see startup.log and wpa_supplicant.conf

wpa_supplicant.conf

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1

network={
    ssid="MyWiFi"
    # Uncomment to connect to Hidden SSIDs
    #scan_ssid=1
    key_mgmt=WPA-PSK
    pairwise=CCMP TKIP
    group=CCMP TKIP WEP104 WEP40
    psk="mypassword"
    priority=2
}

startup.log

==================================================
Starting the Dafang Hacks Custom Application Layer
==================================================
Loaded common functions
Created etc directory on sdcard
Bind mounted /system/sdcard/bin/busybox to /bin/busybox
Bind mounted /system/sdcard/root to /root
Bind mounted /system/sdcard/etc to /etc
01/01/70 00:00:04 Starting wifi
01/01/70 00:00:04 Starting station mode
01/01/70 00:00:04 Stopping access point mode
01/01/70 00:00:04 Stopping ap_scanner
01/01/70 00:00:04 Killing pid  (/var/run/ap_scanner.pid)
01/01/70 00:00:04 Waiting pid  (/var/run/ap_scanner.pid)
01/01/70 00:00:04 Removing pidfile /var/run/ap_scanner.pid
01/01/70 00:00:04 Stopping udhcpd
01/01/70 00:00:05 Killing pid  (/var/run/udhcpd.pid)
01/01/70 00:00:05 Waiting pid  (/var/run/udhcpd.pid)
01/01/70 00:00:05 Removing pidfile /var/run/udhcpd.pid
01/01/70 00:00:05 Stopping hostapd
01/01/70 00:00:05 Killing pid  (/var/run/hostapd.pid)
01/01/70 00:00:05 Waiting pid  (/var/run/hostapd.pid)
01/01/70 00:00:05 Removing pidfile /var/run/hostapd.pid
01/01/70 00:00:05 Resetting interface
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 34:CE:00:AF:0A:55  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

01/01/70 00:00:05 Starting wpa_supplicant
wpa_supplicant v2.5
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlan0' conf '/system/sdcard/config/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/system/sdcard/config/wpa_supplicant.conf' -> '/system/sdcard/config/wpa_supplicant.conf'
Reading configuration file '/system/sdcard/config/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='0'
ap_scan=1
Priority group 2
   id=0 ssid='MyWiFi'
nl80211: Could not add multicast membership for vendor events: -2 (No such file or directory)
rfkill: Cannot open RFKILL control device
nl80211: RFKILL status not available
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Using driver-based off-channel TX
nl80211: Disable use_monitor with device_ap_sme since no monitor mode support detected
nl80211: interface wlan0 in phy phy0
nl80211: Set mode ifindex 2 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x7c0248
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7c0248 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7c0248 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7c0248 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7c0248 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7c0248 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7c0248 match=0505
netlink: Operstate: ifindex=2 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
nl80211: Could not re-add multicast membership for vendor events: -2 (No such file or directory)
nl80211: driver param='(null)'
Add interface wlan0 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
wlan0: Own MAC address: 34:ce:00:af:0a:55
wpa_driver_nl80211_set_key: ifindex=2 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=2 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=2 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=2 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wlan0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlan0: Setting scan request: 0.100000 sec
ENGINE: Loading dynamic engine
ENGINE: Loading dynamic engine
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
ctrl_interface_group=0
wlan0: Added interface wlan0
wlan0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
Daemonize..
01/01/70 00:00:07 Starting wpa_action watchdog
01/01/70 00:00:07 Starting wpa_cli
01/01/70 00:00:07 Starting udhcpc
Initialized gpios
Determined image sensor model as jxf22
Startup finished!

Contents of dmesg after startup:
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.14 (root@ubuntu) (gcc version 4.7.2 (Ingenic r2.3.3 2016.12) ) #21 PREEMPT Thu Oct 19 11:38:16 CST 2017
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 RESET ERROR PC:31A9E011
[    0.000000] CPU0 revision is: 00d00101 (Ingenic Xburst)
[    0.000000] FPU revision is: 00b70000
[    0.000000] cgu_get_rate, parent = 712704000, rate = 0, m = 0, n = 0, reg val = 0x000020ff
[    0.000000] CCLK:712MHz L2CLK:356Mhz H0CLK:200MHz H2CLK:200Mhz PCLK:100Mhz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 0051b000 @ 00010000 (usable)
[    0.000000]  memory: 00035000 @ 0052b000 (usable after init)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 028b9000 @ 00000000 (usable)
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x028b8fff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x028b8fff]
[    0.000000] On node 0 totalpages: 10425
[    0.000000] free_area_init_node: node 0, pgdat 805285f0, node_mem_map 81000000
[    0.000000]   Normal zone: 82 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 10425 pages, LIFO batch:1
[    0.000000] Primary instruction cache 32kB, 8-way, VIPT, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] pls check processor_id[0x00d00101],sc_jz not support!
[    0.000000] MIPS secondary cache 128kB, 8-way, linesize 32 bytes.
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 10343
[    0.000000] Kernel command line: console=ttyS1,115200n8 mem=41700K@0x0 ispmem=8M@0x28B9000 rmem=15644K@0x30B9000 init=/linuxrc rootfstype=squashfs root=/dev/mtdblock2 rw mtdparts=jz_sfc:256k(boot),2048k(kernel),3392k(root),640k(driver),4736k(appfs),2048k(backupk),640k(backupd),2048k(backupa),256k(config),256k(para),-(flag)
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 35192k/41700k available (3951k kernel code, 6508k reserved, 1276k data, 212k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:418
[    0.000000] clockevents_config_and_register success.
[    0.000028] Calibrating delay loop... 709.42 BogoMIPS (lpj=3547136)
[    0.057699] pid_max: default: 32768 minimum: 301
[    0.062744] Mount-cache hash table entries: 512
[    0.067958] Initializing cgroup subsys debug
[    0.072224] Initializing cgroup subsys freezer
[    0.079776] regulator-dummy: no parameters
[    0.084054] NET: Registered protocol family 16
[    0.109158] bio: create slab <bio-0> at 0
[    0.116032] jz-dma jz-dma: JZ SoC DMA initialized
[    0.121298] SCSI subsystem initialized
[    0.125380] usbcore: registered new interface driver usbfs
[    0.130924] usbcore: registered new interface driver hub
[    0.136424] usbcore: registered new device driver usb
[    0.141730] i2c-gpio i2c-gpio.1: using pins 57 (SDA) and 58 (SCL)
[    0.148021]  (null): set:249  hold:250 dev=100000000 h=500 l=500
[    0.154150] media: Linux media interface: v0.10
[    0.158752] Linux video capture interface: v2.00
[    0.165941] Switching to clocksource jz_clocksource
[    0.171611] jz-dwc2 jz-dwc2: cgu clk gate get error
[    0.176617] cfg80211: Calling CRDA to update world regulatory domain
[    0.183081] jz-dwc2 jz-dwc2: regulator vbus get error
[    0.188140] DWC IN OTG MODE
[    0.341053] sft id =========================off
[    0.345675] dwc2 dwc2: Keep PHY ON
[    0.349047] dwc2 dwc2: Using Buffer DMA mode
[    0.552747] dwc2 dwc2: Core Release: 3.00a
[    0.556863] dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller
[    0.563222] dwc2 dwc2: new USB bus registered, assigned bus number 1
[    0.570762] hub 1-0:1.0: USB hub found
[    0.574581] hub 1-0:1.0: 1 port detected
[    0.578647] dwc2 dwc2: DWC2 Host Initialized
[    0.583220] NET: Registered protocol family 2
[    0.588278] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.595266] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.601668] TCP: Hash tables configured (established 512 bind 512)
[    0.607976] TCP: reno registered
[    0.611210] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.617112] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.623810] NET: Registered protocol family 1
[    0.628538] RPC: Registered named UNIX socket transport module.
[    0.634561] RPC: Registered udp transport module.
[    0.639254] RPC: Registered tcp transport module.
[    0.644040] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.651171] freq_udelay_jiffys[0].max_num = 10
[    0.655602] cpufreq  udelay  loops_per_jiffy 
[    0.660032] dwc2 dwc2: ID PIN CHANGED!
[    0.663892] init DWC as A_HOST
[    0.666938] 12000     59724   59724  
[    0.670175] 24000     119448  119448 
[    0.673754] 60000     298620  298620 
[    0.677124] 120000    597241  597241 
[    0.680654] 200000    995402  995402 
[    0.684310] 300000    1493103     1493103    
[    0.687944] 600000    2986206     2986206    
[    0.691679] 792000    3941793     3941793    
[    0.695361] 1008000   5016827     5016827    
[    0.699157] 1200000   5972413     5972413    
[    0.709602] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.716717] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.723416] msgmni has been set to 68
[    0.728726] io scheduler noop registered
[    0.732799] io scheduler cfq registered (default)
[    0.739582] jz-uart.1: ttyS1 at MMIO 0x10031000 (irq = 58) is a uart1
[    0.748240] console [ttyS1] enabled, bootconsole disabled
[    0.764425] brd: module loaded
[    0.770080] loop: module loaded
[    0.774407] zram: Created 2 device(s) ...
[    0.778637] logger: created 256K log 'log_main'
[    0.784139] jz SADC driver registeres over!
[    0.789613] jz TCU driver register completed
[    0.794793] the id code = c84018, the flash name is GD25Q127C
[    0.800719] JZ SFC Controller for SFC channel 0 driver register
[    0.806934] 11 cmdlinepart partitions found on MTD device jz_sfc
[    0.813143] Creating 11 MTD partitions on "jz_sfc":
[    0.818171] 0x000000000000-0x000000040000 : "boot"
[    0.823796] 0x000000040000-0x000000240000 : "kernel"
[    0.829533] 0x000000240000-0x000000590000 : "root"
[    0.835174] 0x000000590000-0x000000630000 : "driver"
[    0.840989] 0x000000630000-0x000000ad0000 : "appfs"
[    0.846683] 0x000000ad0000-0x000000cd0000 : "backupk"
[    0.852605] 0x000000cd0000-0x000000d70000 : "backupd"
[    0.858453] 0x000000d70000-0x000000f70000 : "backupa"
[    0.864385] 0x000000f70000-0x000000fb0000 : "config"
[    0.870195] 0x000000fb0000-0x000000ff0000 : "para"
[    0.875884] 0x000000ff0000-0x000001000000 : "flag"
[    0.881529] SPI NOR MTD LOAD OK
[    0.884849] tun: Universal TUN/TAP device driver, 1.6
[    0.890048] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.896617] usbcore: registered new interface driver zd1201
[    0.902453] usbcore: registered new interface driver r8152
[    0.908196] usbcore: registered new interface driver usb-storage
[    0.914568] usbcore: registered new interface driver usbserial
[    0.920619] usbcore: registered new interface driver usbserial_generic
[    0.927423] usbserial: USB Serial support registered for generic
[    0.933672] usbcore: registered new interface driver ch341
[    0.939355] usbserial: USB Serial support registered for ch341-uart
[    0.945868] usbcore: registered new interface driver cp210x
[    0.951669] usbserial: USB Serial support registered for cp210x
[    0.957818] usbcore: registered new interface driver pl2303
[    0.963617] usbserial: USB Serial support registered for pl2303
[    1.469620] i8042: i8042 controller selftest timeout
[    1.475349] jzmmc_v1.2 jzmmc_v1.2.0: vmmc regulator missing
[    1.490878] jzmmc_v1.2 jzmmc_v1.2.0: card inserted, state=0
[    1.520882] jzmmc_v1.2 jzmmc_v1.2.0: register success!
[    1.526252] jzmmc_v1.2 jzmmc_v1.2.1: vmmc regulator missing
[    1.570991] jzmmc_v1.2 jzmmc_v1.2.1: register success!
[    1.576456] hidraw: raw HID events driver (C) Jiri Kosina
[    1.583448] usbcore: registered new interface driver usbhid
[    1.589188] usbhid: USB HID core driver
[    1.593493] TCP: cubic registered
[    1.596914] NET: Registered protocol family 17
[    1.602745] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    1.609885] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.623085] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.630790] Freeing unused kernel memory: 212K (8052b000 - 80560000)
[    1.773544] dwc2 dwc2:  ++OTG Interrupt: A-Device Timeout Change++
[    2.650943] wait stable.[246][cgu_msc0]
[    2.655032] mmc0: new high speed SD card at address 1234
[    2.663828] mmcblk0: mmc0:1234 SA02G 1.81 GiB 
[    2.671739]  mmcblk0: p1
[    3.022876] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    4.191892] Unable to find swap-space signature
[    4.769157] RTL871X: module init start
[    4.773120] RTL871X: rtl8189es v4.3.18.3_20185.20161116_pmpinclu_mac_monitor_minMem_EDCA542B_pbyr
[    4.782335] RTL871X: build time: Oct 19 2017 11:54:52
[    4.787545] wlan power on
[    4.801397] RTL871X: module init ret=0
[    4.862011] mmc1: new SDIO card at address 0001
[    4.887364] bFWReady == _FALSE call reset 8051...
[    4.925497] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=34:ce:00:af:0a:55
[    5.401052] ==> rtl8188e_iol_efuse_patch 
[   34.100469] RTL871X: rtw_set_802_11_connect(wlan0)  fw_state=0x00000008
[   47.317861] request spk en gpio 63 ok!
[   47.317879] jz_codec_register: probe() successful!
[   47.325361] cgu_set_rate, parent = 712704000, rate = 2048000, n = 348, reg val = 0x0000215c
[   47.325383] cgu_enable,cgu_i2s reg val = 0x2000215c
[   47.671361] dma dma0chan24: Channel 24 have been requested.(phy id 7,type 0x06 desc a1cfb000)
[   47.680651] dma dma0chan25: Channel 25 have been requested.(phy id 6,type 0x06 desc a1415000)
[   48.743031] motor_probe743
[   48.764061] name : i2c-gpio1 nr : 1
[   48.767663] name : i2c0 nr : 0
[   48.833941] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   48.841058] i2c i2c-0: --I2C txabrt:
[   48.844747] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   48.851317] error: sensor_read,172 ret = -5
[   48.855625]  sensor_read: addr=0xa value = 0x0
[   48.860200] err sensor read addr = 0xa, value = 0x0
[   48.925234] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   48.932336] i2c i2c-0: --I2C txabrt:
[   48.936024] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   48.942594] error: sensor_read,172 ret = -5
[   48.946901]  sensor_read: addr=0x300a value = 0x0
[   48.951759] err sensor read addr = 0x300a, value = 0x0
[   49.017041] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.024143] i2c i2c-0: --I2C txabrt:
[   49.027831] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.034401] error: sensor_read,172 ret = -5
[   49.038707]  sensor_read: addr=0x300b value = 0x0
[   49.043564] err sensor read addr = 0x300b, value = 0x0
[   49.108841] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.115943] i2c i2c-0: --I2C txabrt:
[   49.119629] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.126200] error: sensor_read,172 ret = -5
[   49.130506]  sensor_read: addr=0xa value = 0x0
[   49.135095] err sensor read addr = 0xa, value = 0x0
[   49.200112] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.207215] i2c i2c-0: --I2C txabrt:
[   49.210918] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.217471] error: sensor_read,172 ret = -5
[   49.221792]  sensor_read: addr=0x580b value = 0x0
[   49.226636] err sensor read addr = 0x580b, value = 0x0
[   49.291926] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.299054] i2c i2c-0: --I2C txabrt:
[   49.302760] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.309316] error: sensor_read,172 ret = -5
[   49.313640]  sensor_read: addr=0x580b value = 0x0
[   49.318484] err sensor read addr = 0x580b, value = 0x0
[   49.383777] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.390878] i2c i2c-0: --I2C txabrt:
[   49.394565] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.401134] error: sensor_read,172 ret = -5
[   49.405442]  sensor_read: addr=0x3107 value = 0x0
[   49.410284] err sensor read addr = 0x3107, value = 0x0
[   49.475574] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.482677] i2c i2c-0: --I2C txabrt:
[   49.486362] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.492929] error: sensor_read,172 ret = -5
[   49.497236]  sensor_read: addr=0x3107 value = 0x0
[   49.502092] err sensor read addr = 0x3107, value = 0x0
[   49.567369] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.574469] i2c i2c-0: --I2C txabrt:
[   49.578154] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.584724] error: sensor_read,172 ret = -5
[   49.589031]  sensor_read: addr=0x3000 value = 0x0
[   49.593888] err sensor read addr = 0x3000, value = 0x0
[   49.660294] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.667416] i2c i2c-0: --I2C txabrt:
[   49.671120] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.677678] error: sensor_read,172 ret = -5
[   49.682000]  sensor_read: addr=0xa value = 0x0
[   49.686576] err sensor read addr = 0xa, value = 0x0
[   49.751606] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.758694] i2c i2c-0: --I2C txabrt:
[   49.762398] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.768954] error: sensor_read,172 ret = -5
[   49.773274]  sensor_read: addr=0xf0 value = 0x0
[   49.777938] err sensor read addr = 0xf0, value = 0x0
[   49.843053] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.850141] i2c i2c-0: --I2C txabrt:
[   49.853877] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.860437] error: sensor_read,172 ret = -5
[   49.864765]  sensor_read: addr=0xf0 value = 0x0
[   49.869431] err sensor read addr = 0xf0, value = 0x0
[   49.934544] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.941645] i2c i2c-0: --I2C txabrt:
[   49.945331] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.951902] error: sensor_read,172 ret = -5
[   49.956208]  sensor_read: addr=0xf0 value = 0x0
[   49.960885] err sensor read addr = 0xf0, value = 0x0
[   50.025986] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.033087] i2c i2c-0: --I2C txabrt:
[   50.036774] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.043341] error: sensor_read,172 ret = -5
[   50.047649]  sensor_read: addr=0xfc value = 0x0
[   50.052328] err sensor read addr = 0xfc, value = 0x0
[   50.117427] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.124529] i2c i2c-0: --I2C txabrt:
[   50.128215] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.134785] error: sensor_read,172 ret = -5
[   50.139092]  sensor_read: addr=0x3004 value = 0x0
[   50.143948] err sensor read addr = 0x3004, value = 0x0
[   50.209225] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.216328] i2c i2c-0: --I2C txabrt:
[   50.220013] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.226583] error: sensor_read,172 ret = -5
[   50.230905]  sensor_read: addr=0x300a value = 0x0
[   50.235747] err sensor read addr = 0x300a, value = 0x0
[   50.301211] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.308300] i2c i2c-0: --I2C txabrt:
[   50.312005] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.318563] error: sensor_read,172 ret = -5
[   50.322885]  sensor_read: addr=0x31f3 value = 0x0
[   50.327729] err sensor read addr = 0x31f3, value = 0x0
[   50.393027] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.400113] i2c i2c-0: --I2C txabrt:
[   50.403814] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.410371] error: sensor_read,172 ret = -5
[   50.414693]  sensor_read: addr=0x3107 value = 0x0
[   50.419537] err sensor read addr = 0x3107, value = 0x0
[   50.484826] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.491927] i2c i2c-0: --I2C txabrt:
[   50.495612] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.502181] error: sensor_read,172 ret = -5
[   50.506486]  sensor_read: addr=0x4 value = 0x0
[   50.511075] err sensor read addr = 0x4, value = 0x0
[   50.576082] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.583183] i2c i2c-0: --I2C txabrt:
[   50.586870] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.593439] error: sensor_read,172 ret = -5
[   50.597745]  sensor_read: addr=0xa value = 0x0
[   50.602334] err sensor read addr = 0xa, value = 0x0
[   50.667410] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.674516] i2c i2c-0: --I2C txabrt:
[   50.678202] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.684774] error: sensor_read,172 ret = -5
[   50.689081]  sensor_read: addr=0x0 value = 0x0
[   50.693671] err sensor read addr = 0x0, value = 0x0
[   50.758684] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.765787] i2c i2c-0: --I2C txabrt:
[   50.769474] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.776044] error: sensor_read,172 ret = -5
[   50.780349]  sensor_read: addr=0x300a value = 0x0
[   50.785208] err sensor read addr = 0x300a, value = 0x0
[   50.850742]  sensor_read: addr=0xa value = 0xf
[   50.855748]  sensor_read: addr=0xb value = 0x22
[   50.860420] info: success sensor find : jxf22
[   51.023262] register all isp device successfully!
[   51.033685] @@@@ tx-isp-probe ok @@@@@
cat: can't open '/var/run/wpa_action.pid': No such file or directory
/system/sdcard/scripts/wifi.sh: wait: line 54: Illegal number:
NickNameNemo commented 3 years ago

Could anybody help me?

Below additional information from boot - boot with CFW and without CFW

boot_with_CFW

U-Boot SPL 2013.07 (Sep 15 2017 - 10:31:19)
pll_init:365
l2cache_clk = 375000000
pll_cfg.pdiv = 8, pll_cfg.h2div = 4, pll_cfg.h0div = 4, pll_cfg.cdiv = 1, pll_cfg.l2div = 2
nf=30 nr = 1 od0 = 1 od1 = 1
cppcr is 03c05100
CPM_CPAPCR 03b0890d
nf=42 nr = 1 od0 = 1 od1 = 1
cppcr is 02a04900
CPM_CPMPCR 07d0c90d
nf=50 nr = 1 od0 = 1 od1 = 1
cppcr is 03204900
CPM_CPVPCR 0320490d
cppcr 0x9a794410
apll_freq 712704000 
mpll_freq 1000000000 
vpll_freq = 1200000000
ddr sel mpll, cpu sel apll
ddrfreq 500000000
cclk  712704000
l2clk 356352000
h0clk 250000000
h2clk 250000000
pclk  125000000
DDRC_DLP:0000f003

U-Boot 2013.07 (Sep 15 2017 - 10:31:19)

Board: ISVP (Ingenic XBurst T20 SoC)
DRAM:  64 MiB
Top of RAM usable for U-Boot at: 84000000
Reserving 399k for U-Boot at: 83f9c000
Reserving 32784k for malloc() at: 81f98000
Reserving 32 Bytes for Board Info at: 81f97fe0
Reserving 124 Bytes for Global Data at: 81f97f64
Reserving 128k for boot params() at: 81f77f64
Stack Pointer at: 81f77f48
Now running in RAM - U-Boot at: 83f9c000
MMC:   msc: 0
the manufacturer c8
SF: Detected GD25Q128

*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
misc_init_r before change the yellow_gpio
gpio_request lable = yellow_gpio gpio = 38
misc_init_r after gpio_request the yellow_gpio ret is 38
misc_init_r after change the yellow_gpio ret is 0
misc_init_r before change the blue_gpio
gpio_request lable = blue_gpio gpio = 39
misc_init_r after gpio_request the blue_gpio ret is 39
misc_init_r after change the blue_gpio ret is 1
gpio_request lable = night_gpio gpio = 81
misc_init_r after gpio_request the night_gpio ret is 81
misc_init_r after change the night_gpio ret is 0
gpio_request lable = night_gpio gpio = 25
misc_init_r after gpio_request the night_gpio ret is 25
misc_init_r after change the night_gpio ret is 0
gpio_request lable = night_gpio gpio = 49
misc_init_r after gpio_request the night_gpio ret is 49
misc_init_r after change the night_gpio ret is 0
gpio_request lable = USB_able_gpio gpio = 47
misc_init_r after gpio_request the USB_able_gpio ret is 47
misc_init_r after change the USB_able_gpio ret is 1
gpio_request lable = TF_able_gpio gpio = 43
misc_init_r after gpio_request the TF_able_gpio ret is 43
misc_init_r after change the TF_able_gpio ret is 1
gpio_request lable = SPK_able_gpio gpio = 63
misc_init_r after gpio_request the SPK_able_gpio ret is 63
misc_init_r after change the SPK_able_gpio ret is 0
gpio_request lable = SD_able_gpio gpio = 48
misc_init_r after gpio_request the SD_able_gpio ret is 48
misc_init_r after change the SD_able_gpio ret is 0
Hit any key to stop autoboot:  0 
jiabo_do_auto_update!!!!!!!!!!!!!!!!!!!!!!!!
gpio_request lable = sdupgrade gpio = 46
the manufacturer c8
SF: Detected GD25Q128

jiabo_update_to_flash!!!!!!!!!!!!!!!!!!!!!!!!
jiabo_au_do_update!!!!!!!!!!!!!!!!!!!!!!!!
start=0
start=40000
len=40000
flash check read...
FWGRADEUP not find !!!!!!!!!
gradeup check fail!!!!!!!!!!!!!!!!!!!
the manufacturer c8
SF: Detected GD25Q128

Erasing SPI flash...addr align as 10000 !
sfc erase error
the manufacturer c8
SF: Detected GD25Q128

--->probe spend 4 ms
SF: 2621440 bytes @ 0x40000 Read: OK
--->read spend 339 ms
## Booting kernel from Legacy Image at 80600000 ...
   Image Name:   Linux-3.10.14
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1805541 Bytes = 1.7 MiB
   Load Address: 80010000
   Entry Point:  803e30f0
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.14 (root@ubuntu) (gcc version 4.7.2 (Ingenic r2.3.3 2016.12) ) #21 PREEMPT Thu Oct 19 11:38:16 CST 2017
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 RESET ERROR PC:19A9E011
[    0.000000] CPU0 revision is: 00d00101 (Ingenic Xburst)
[    0.000000] FPU revision is: 00b70000
[    0.000000] CCLK:712MHz L2CLK:356Mhz H0CLK:200MHz H2CLK:200Mhz PCLK:100Mhz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 0051b000 @ 00010000 (usable)
[    0.000000]  memory: 00035000 @ 0052b000 (usable after init)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 028b9000 @ 00000000 (usable)
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x028b8fff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x028b8fff]
[    0.000000] Primary instruction cache 32kB, 8-way, VIPT, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] pls check processor_id[0x00d00101],sc_jz not support!
[    0.000000] MIPS secondary cache 128kB, 8-way, linesize 32 bytes.
[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 10343
[    0.000000] Kernel command line: console=ttyS1,115200n8 mem=41700K@0x0 ispmem=8M@0x28B9000 rmem=15644K@0x30B9000 init=/linuxrc rootfstype=squashfs root=/dev/mtdblock2 rw mtdparts=jz_sfc:256k(boot),2048k(kernel),3392k(root),640k(driver),4736k(appfs),2048k(backupk),640k(backupd),2048k(backupa),256k(config),256k(para),-(flag)
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 35192k/41700k available (3951k kernel code, 6508k reserved, 1276k data, 212k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:418
[    0.000000] clockevents_config_and_register success.
[    0.000028] Calibrating delay loop... 709.42 BogoMIPS (lpj=3547136)
[    0.057700] pid_max: default: 32768 minimum: 301
[    0.062745] Mount-cache hash table entries: 512
[    0.067958] Initializing cgroup subsys debug
[    0.072224] Initializing cgroup subsys freezer
[    0.079778] regulator-dummy: no parameters
[    0.084055] NET: Registered protocol family 16
[    0.109161] bio: create slab <bio-0> at 0
[    0.116034] jz-dma jz-dma: JZ SoC DMA initialized
[    0.121300] SCSI subsystem initialized
[    0.125382] usbcore: registered new interface driver usbfs
[    0.130924] usbcore: registered new interface driver hub
[    0.136428] usbcore: registered new device driver usb
[    0.141732] i2c-gpio i2c-gpio.1: using pins 57 (SDA) and 58 (SCL)
[    0.148026]  (null): set:249  hold:250 dev=100000000 h=500 l=500
[    0.154157] media: Linux media interface: v0.10
[    0.158756] Linux video capture interface: v2.00
[    0.165946] Switching to clocksource jz_clocksource
[    0.171616] jz-dwc2 jz-dwc2: cgu clk gate get error
[    0.176621] cfg80211: Calling CRDA to update world regulatory domain
[    0.183084] jz-dwc2 jz-dwc2: regulator vbus get error
[    0.188144] DWC IN OTG MODE
[    0.341057] sft id =========================off
[    0.345679] dwc2 dwc2: Keep PHY ON
[    0.349052] dwc2 dwc2: Using Buffer DMA mode
[    0.552752] dwc2 dwc2: Core Release: 3.00a
[    0.556868] dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller
[    0.563226] dwc2 dwc2: new USB bus registered, assigned bus number 1
[    0.570766] hub 1-0:1.0: USB hub found
[    0.574586] hub 1-0:1.0: 1 port detected
[    0.578653] dwc2 dwc2: DWC2 Host Initialized
[    0.583226] NET: Registered protocol family 2
[    0.588284] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.595272] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.601673] TCP: Hash tables configured (established 512 bind 512)
[    0.607981] TCP: reno registered
[    0.611216] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.617117] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.623816] NET: Registered protocol family 1
[    0.628546] RPC: Registered named UNIX socket transport module.
[    0.634570] RPC: Registered udp transport module.
[    0.639263] RPC: Registered tcp transport module.
[    0.644050] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.651180] freq_udelay_jiffys[0].max_num = 10
[    0.655611] cpufreq  udelay  loops_per_jiffy 
[    0.660042] dwc2 dwc2: ID PIN CHANGED!
[    0.663900] init DWC as A_HOST
[    0.666946] 12000     59724   59724  
[    0.670183] 24000     119448  119448 
[    0.673762] 60000     298620  298620 
[    0.677131] 120000    597241  597241 
[    0.680662] 200000    995402  995402 
[    0.684317] 300000    1493103     1493103    
[    0.687951] 600000    2986206     2986206    
[    0.691686] 792000    3941793     3941793    
[    0.695368] 1008000   5016827     5016827    
[    0.699164] 1200000   5972413     5972413    
[    0.709607] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.716723] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.723422] msgmni has been set to 68
[    0.728737] io scheduler noop registered
[    0.732809] io scheduler cfq registered (default)
[    0.739593] jz-uart.1: ttyS1 at MMIO 0x10031000 (irq = 58) is a uart1
[    0.748251] console [ttyS1] enabled, bootconsole disabled
[    0.748251] console [ttyS1] enabled, bootconsole disabled
[    0.764439] brd: module loaded
[    0.770090] loop: module loaded
[    0.774415] zram: Created 2 device(s) ...
[    0.778643] logger: created 256K log 'log_main'
[    0.784146] jz SADC driver registeres over!
[    0.789616] jz TCU driver register completed
[    0.794793] the id code = c84018, the flash name is GD25Q127C
[    0.800719] JZ SFC Controller for SFC channel 0 driver register
[    0.806932] 11 cmdlinepart partitions found on MTD device jz_sfc
[    0.813141] Creating 11 MTD partitions on "jz_sfc":
[    0.818169] 0x000000000000-0x000000040000 : "boot"
[    0.823794] 0x000000040000-0x000000240000 : "kernel"
[    0.829533] 0x000000240000-0x000000590000 : "root"
[    0.835174] 0x000000590000-0x000000630000 : "driver"
[    0.840991] 0x000000630000-0x000000ad0000 : "appfs"
[    0.846687] 0x000000ad0000-0x000000cd0000 : "backupk"
[    0.852607] 0x000000cd0000-0x000000d70000 : "backupd"
[    0.858459] 0x000000d70000-0x000000f70000 : "backupa"
[    0.864393] 0x000000f70000-0x000000fb0000 : "config"
[    0.870200] 0x000000fb0000-0x000000ff0000 : "para"
[    0.875889] 0x000000ff0000-0x000001000000 : "flag"
[    0.881537] SPI NOR MTD LOAD OK
[    0.884856] tun: Universal TUN/TAP device driver, 1.6
[    0.890058] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.896630] usbcore: registered new interface driver zd1201
[    0.902463] usbcore: registered new interface driver r8152
[    0.908207] usbcore: registered new interface driver usb-storage
[    0.914581] usbcore: registered new interface driver usbserial
[    0.920632] usbcore: registered new interface driver usbserial_generic
[    0.927435] usbserial: USB Serial support registered for generic
[    0.933681] usbcore: registered new interface driver ch341
[    0.939363] usbserial: USB Serial support registered for ch341-uart
[    0.945873] usbcore: registered new interface driver cp210x
[    0.951675] usbserial: USB Serial support registered for cp210x
[    0.957824] usbcore: registered new interface driver pl2303
[    0.963622] usbserial: USB Serial support registered for pl2303
[    1.469624] i8042: i8042 controller selftest timeout
[    1.475350] jzmmc_v1.2 jzmmc_v1.2.0: vmmc regulator missing
[    1.490883] jzmmc_v1.2 jzmmc_v1.2.0: card inserted, state=0
[    1.520887] jzmmc_v1.2 jzmmc_v1.2.0: register success!
[    1.526258] jzmmc_v1.2 jzmmc_v1.2.1: vmmc regulator missing
[    1.570995] jzmmc_v1.2 jzmmc_v1.2.1: register success!
[    1.576460] hidraw: raw HID events driver (C) Jiri Kosina
[    1.583450] usbcore: registered new interface driver usbhid
[    1.589190] usbhid: USB HID core driver
[    1.593496] TCP: cubic registered
[    1.596917] NET: Registered protocol family 17
[    1.602748] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    1.609888] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.623085] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.630788] Freeing unused kernel memory: 212K (8052b000 - 80560000)
[    1.773547] dwc2 dwc2:  ++OTG Interrupt: A-Device Timeout Change++
mdev is ok......
[    2.711054] wait stable.[246][cgu_msc0]
[    2.715115] mmc0: new high speed SD card at address 1234
[    2.724461] mmcblk0: mmc0:1234 SA02G 1.81 GiB 
[    2.732788]  mmcblk0: p1
Trying to mount SDCard...
mkdir: can't create directory '/system/sdcard': File exists
[    3.024489] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Mount sucessful
Starting run.sh from sdcard

Ingenic-uc1_1 login: /system/sdcard/run.sh: line 61: can't create //.busybox_aliases: Read-only file system
sh: write error: Invalid argument
mkswap: image is too small
[    4.197345] Unable to find swap-space signature
swapon: /dev/zram0: Invalid argument
[    4.773209] RTL871X: module init start
[    4.777085] RTL871X: rtl8189es v4.3.18.3_20185.20161116_pmpinclu_mac_monitor_minMem_EDCA542B_pbyr
[    4.788877] RTL871X: build time: Oct 19 2017 11:54:52
[    4.794191] wlan power on
[    4.811388] RTL871X: module init ret=0
[    4.872887] mmc1: new SDIO card at address 0001
[    4.896725] bFWReady == _FALSE call reset 8051...
[    4.936661] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=34:ce:00:af:0a:55
cat: can't open '/var/run/ap_scanner.pid': No such file or directory
/system/sdcard/scripts/wifi.sh: wait: line 54: Illegal number: 
cat: can't open '/var/run/udhcpd.pid': No such file or directory
/system/sdcard/scripts/wifi.sh: wait: line 54: Illegal number: 
cat: can't open '/var/run/hostapd.pid': No such file or directory
/system/sdcard/scripts/wifi.sh: wait: line 54: Illegal number: 
[    5.411065] ==> rtl8188e_iol_efuse_patch 
udhcpc: started, v1.32.0.git
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending discover
udhcpc: no lease, forking to background
Terminated
[   47.317609] jz_codec_register: probe() successful!
[   47.671366] dma dma0chan24: Channel 24 have been requested.(phy id 7,type 0x06 desc a0fa3000)
[   47.680658] dma dma0chan25: Channel 25 have been requested.(phy id 6,type 0x06 desc a1414000)
[   48.743176] motor_probe743
[   48.764481] name : i2c-gpio1 nr : 1
[   48.768082] name : i2c0 nr : 0
[   48.834212] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   48.841335] i2c i2c-0: --I2C txabrt:
[   48.845022] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   48.851595] error: sensor_read,172 ret = -5
[   48.855903]  sensor_read: addr=0xa value = 0x0
[   48.860478] err sensor read addr = 0xa, value = 0x0
[   48.925511] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   48.932613] i2c i2c-0: --I2C txabrt:
[   48.936301] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   48.942871] error: sensor_read,172 ret = -5
[   48.947177]  sensor_read: addr=0x300a value = 0x0
[   48.952034] err sensor read addr = 0x300a, value = 0x0
[   49.017316] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.024420] i2c i2c-0: --I2C txabrt:
[   49.028107] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.034679] error: sensor_read,172 ret = -5
[   49.038983]  sensor_read: addr=0x300b value = 0x0
[   49.043839] err sensor read addr = 0x300b, value = 0x0
[   49.109117] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.116219] i2c i2c-0: --I2C txabrt:
[   49.119907] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.126478] error: sensor_read,172 ret = -5
[   49.130785]  sensor_read: addr=0xa value = 0x0
[   49.135375] err sensor read addr = 0xa, value = 0x0
[   49.200383] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.207486] i2c i2c-0: --I2C txabrt:
[   49.211188] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.217744] error: sensor_read,172 ret = -5
[   49.222066]  sensor_read: addr=0x580b value = 0x0
[   49.226909] err sensor read addr = 0x580b, value = 0x0
[   49.292199] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.299327] i2c i2c-0: --I2C txabrt:
[   49.303035] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.309591] error: sensor_read,172 ret = -5
[   49.313914]  sensor_read: addr=0x580b value = 0x0
[   49.318758] err sensor read addr = 0x580b, value = 0x0
[   49.384051] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.391153] i2c i2c-0: --I2C txabrt:
[   49.394840] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.401416] error: sensor_read,172 ret = -5
[   49.405723]  sensor_read: addr=0x3107 value = 0x0
[   49.410565] err sensor read addr = 0x3107, value = 0x0
[   49.475854] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.482956] i2c i2c-0: --I2C txabrt:
[   49.486644] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.493212] error: sensor_read,172 ret = -5
[   49.497518]  sensor_read: addr=0x3107 value = 0x0
[   49.502376] err sensor read addr = 0x3107, value = 0x0
[   49.567653] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.574755] i2c i2c-0: --I2C txabrt:
[   49.578442] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.585013] error: sensor_read,172 ret = -5
[   49.589318]  sensor_read: addr=0x3000 value = 0x0
[   49.594173] err sensor read addr = 0x3000, value = 0x0
[   49.660582] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.667701] i2c i2c-0: --I2C txabrt:
[   49.671406] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.677963] error: sensor_read,172 ret = -5
[   49.682283]  sensor_read: addr=0xa value = 0x0
[   49.686858] err sensor read addr = 0xa, value = 0x0
[   49.751886] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.758973] i2c i2c-0: --I2C txabrt:
[   49.762676] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.769229] error: sensor_read,172 ret = -5
[   49.773552]  sensor_read: addr=0xf0 value = 0x0
[   49.778215] err sensor read addr = 0xf0, value = 0x0
[   49.843326] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.850412] i2c i2c-0: --I2C txabrt:
[   49.854112] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.860668] error: sensor_read,172 ret = -5
[   49.864989]  sensor_read: addr=0xf0 value = 0x0
[   49.869652] err sensor read addr = 0xf0, value = 0x0
[   49.934763] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   49.941866] i2c i2c-0: --I2C txabrt:
[   49.945553] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   49.952121] error: sensor_read,172 ret = -5
[   49.956428]  sensor_read: addr=0xf0 value = 0x0
[   49.961105] err sensor read addr = 0xf0, value = 0x0
[   50.026205] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.033305] i2c i2c-0: --I2C txabrt:
[   50.036992] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.043561] error: sensor_read,172 ret = -5
[   50.047869]  sensor_read: addr=0xfc value = 0x0
[   50.052546] err sensor read addr = 0xfc, value = 0x0
[   50.117644] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.124746] i2c i2c-0: --I2C txabrt:
[   50.128433] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.135003] error: sensor_read,172 ret = -5
[   50.139311]  sensor_read: addr=0x3004 value = 0x0
[   50.144167] err sensor read addr = 0x3004, value = 0x0
[   50.209443] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.216545] i2c i2c-0: --I2C txabrt:
[   50.220233] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.226803] error: sensor_read,172 ret = -5
[   50.231122]  sensor_read: addr=0x300a value = 0x0
[   50.235965] err sensor read addr = 0x300a, value = 0x0
[   50.301423] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.308515] i2c i2c-0: --I2C txabrt:
[   50.312221] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.318778] error: sensor_read,172 ret = -5
[   50.323102]  sensor_read: addr=0x31f3 value = 0x0
[   50.327945] err sensor read addr = 0x31f3, value = 0x0
[   50.393247] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.400333] i2c i2c-0: --I2C txabrt:
[   50.404035] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.410592] error: sensor_read,172 ret = -5
[   50.414911]  sensor_read: addr=0x3107 value = 0x0
[   50.419755] err sensor read addr = 0x3107, value = 0x0
[   50.485046] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.492147] i2c i2c-0: --I2C txabrt:
[   50.495833] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.502406] error: sensor_read,172 ret = -5
[   50.506713]  sensor_read: addr=0x4 value = 0x0
[   50.511303] err sensor read addr = 0x4, value = 0x0
[   50.576312] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.583413] i2c i2c-0: --I2C txabrt:
[   50.587098] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.593668] error: sensor_read,172 ret = -5
[   50.597973]  sensor_read: addr=0xa value = 0x0
[   50.602562] err sensor read addr = 0xa, value = 0x0
[   50.667637] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.674744] i2c i2c-0: --I2C txabrt:
[   50.678429] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.685002] error: sensor_read,172 ret = -5
[   50.689308]  sensor_read: addr=0x0 value = 0x0
[   50.693897] err sensor read addr = 0x0, value = 0x0
[   50.758959] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   50.766064] i2c i2c-0: --I2C txabrt:
[   50.769751] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   50.776322] error: sensor_read,172 ret = -5
[   50.780630]  sensor_read: addr=0x300a value = 0x0
[   50.785486] err sensor read addr = 0x300a, value = 0x0
[   50.851026]  sensor_read: addr=0xa value = 0xf
[   50.856008]  sensor_read: addr=0xb value = 0x22
[   50.860680] info: success sensor find : jxf22
[   51.023516] register all isp device successfully!
[   51.033706] @@@@ tx-isp-probe ok @@@@@
Starting mDNSResponder
Starting software auto night detection
Starting web server...
Starting Dropbear Server
Starting v4l2rtspserver-master
Jan  1 00:00:51 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:51 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:51 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:51 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:51 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:51 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:51 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
[   52.481116] name : i2c-gpio1 nr : 1
[   52.484716] name : i2c0 nr : 0
[   52.607632] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   52.616862] i2c i2c-0: --I2C txabrt:
[   52.622299] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   52.635030] error: sensor_read,172 ret = -5
[   52.639361]  sensor_read: addr=0xa value = 0x0
[   52.673098] err sensor read addr = 0xa, value = 0x0
[   52.758041] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   52.768977] i2c i2c-0: --I2C txabrt:
[   52.772747] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   52.780108] error: sensor_read,172 ret = -5
[   52.784949]  sensor_read: addr=0x300a value = 0x0
[   52.790328] err sensor read addr = 0x300a, value = 0x0
[   52.876801] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   52.887295] i2c i2c-0: --I2C txabrt:
[   52.891241] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   52.902360] error: sensor_read,172 ret = -5
[   52.906675]  sensor_read: addr=0x300b value = 0x0
[   52.918304] err sensor read addr = 0x300b, value = 0x0
[   52.986095] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   52.993211] i2c i2c-0: --I2C txabrt:
[   52.996898] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   53.003477] error: sensor_read,172 ret = -5
[   53.007783]  sensor_read: addr=0xa value = 0x0
[   53.012395] err sensor read addr = 0xa, value = 0x0
Jan  1 00:00:53 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:53 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:53 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:53 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:53 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:53 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
[   53.093947] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   53.101331] i2c i2c-0: --I2C txabrt:
[   53.105023] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   53.111629] error: sensor_read,172 ret = -5
[   53.115939]  sensor_read: addr=0x580b value = 0x0
[   53.120782] err sensor read addr = 0x580b, value = 0x0
[   53.186096] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   53.193201] i2c i2c-0: --I2C txabrt:
[   53.196887] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   53.203511] error: sensor_read,172 ret = -5
[   53.207820]  sensor_read: addr=0x580b value = 0x0
[   53.212682] err sensor read addr = 0x580b, value = 0x0
[   53.278040] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   53.285146] i2c i2c-0: --I2C txabrt:
[   53.288834] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   53.295405] error: sensor_read,172 ret = -5
[   53.299710]  sensor_read: addr=0x3107 value = 0x0
[   53.304569] err sensor read addr = 0x3107, value = 0x0
[   53.369848] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   53.376951] i2c i2c-0: --I2C txabrt:
[   53.380636] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   53.387206] error: sensor_read,172 ret = -5
[   53.391526]  sensor_read: addr=0x3107 value = 0x0
[   53.396369] err sensor read addr = 0x3107, value = 0x0
[   53.461660] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   53.468746] i2c i2c-0: --I2C txabrt:
[   53.472576] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   53.479136] error: sensor_read,172 ret = -5
[   53.483479]  sensor_read: addr=0x3000 value = 0x0
[   53.488324] err sensor read addr = 0x3000, value = 0x0
[   53.554103] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   53.561220] i2c i2c-0: --I2C txabrt:
[   53.564908] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   53.571481] error: sensor_read,172 ret = -5
[   53.575788]  sensor_read: addr=0xa value = 0x0
[   53.580364] err sensor read addr = 0xa, value = 0x0
[   53.646654] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   53.653840] i2c i2c-0: --I2C txabrt:
[   53.657528] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   53.664110] error: sensor_read,172 ret = -5
[   53.668416]  sensor_read: addr=0xf0 value = 0x0
[   53.673356] err sensor read addr = 0xf0, value = 0x0
[   53.738597] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   53.745704] i2c i2c-0: --I2C txabrt:
[   53.749390] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   53.755962] error: sensor_read,172 ret = -5
[   53.760269]  sensor_read: addr=0xf0 value = 0x0
[   53.764949] err sensor read addr = 0xf0, value = 0x0
[   53.830406] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   53.837521] i2c i2c-0: --I2C txabrt:
[   53.841222] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   53.847780] error: sensor_read,172 ret = -5
[   53.852100]  sensor_read: addr=0xf0 value = 0x0
[   53.856766] err sensor read addr = 0xf0, value = 0x0
[   53.922070] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   53.929161] i2c i2c-0: --I2C txabrt:
[   53.932870] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   53.939427] error: sensor_read,172 ret = -5
[   53.943750]  sensor_read: addr=0xfc value = 0x0
[   53.948414] err sensor read addr = 0xfc, value = 0x0
[   54.013539] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   54.020634] i2c i2c-0: --I2C txabrt:
[   54.024339] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   54.030910] error: sensor_read,172 ret = -5
[   54.035215]  sensor_read: addr=0x3004 value = 0x0
[   54.040059] err sensor read addr = 0x3004, value = 0x0
[   54.105672] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   54.112786] i2c i2c-0: --I2C txabrt:
[   54.116475] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   54.123048] error: sensor_read,172 ret = -5
[   54.127355]  sensor_read: addr=0x300a value = 0x0
[   54.132214] err sensor read addr = 0x300a, value = 0x0
[   54.197764] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   54.204875] i2c i2c-0: --I2C txabrt:
[   54.208564] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   54.215135] error: sensor_read,172 ret = -5
[   54.219443]  sensor_read: addr=0x31f3 value = 0x0
[   54.224302] err sensor read addr = 0x31f3, value = 0x0
[   54.289657] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   54.297054] i2c i2c-0: --I2C txabrt:
[   54.300746] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   54.307343] error: sensor_read,172 ret = -5
[   54.311667]  sensor_read: addr=0x3107 value = 0x0
[   54.316511] err sensor read addr = 0x3107, value = 0x0
[   54.381817] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   54.388904] i2c i2c-0: --I2C txabrt:
[   54.392608] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   54.399222] error: sensor_read,172 ret = -5
[   54.403551]  sensor_read: addr=0x4 value = 0x0
[   54.408125] err sensor read addr = 0x4, value = 0x0
[   54.473191] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   54.480281] i2c i2c-0: --I2C txabrt:
[   54.483985] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   54.490541] error: sensor_read,172 ret = -5
[   54.494864]  sensor_read: addr=0xa value = 0x0
[   54.499437] err sensor read addr = 0xa, value = 0x0
[   54.564469] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   54.571572] i2c i2c-0: --I2C txabrt:
[   54.575260] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   54.581829] error: sensor_read,172 ret = -5
[   54.586134]  sensor_read: addr=0x0 value = 0x0
[   54.590709] err sensor read addr = 0x0, value = 0x0
[   54.655801] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt
[   54.662915] i2c i2c-0: --I2C txabrt:
[   54.666604] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK
[   54.673176] error: sensor_read,172 ret = -5
[   54.677682]  sensor_read: addr=0x300a value = 0x0
[   54.682577] err sensor read addr = 0x300a, value = 0x0
[   54.748193]  sensor_read: addr=0xa value = 0xf
[   54.753198]  sensor_read: addr=0xb value = 0x22
[   54.757872] info: success sensor find : jxf22
[   54.762469] misc sinfo_release
[   54.770297] set sensor gpio as PA-low-10bit
[   54.803623] jxf22 0-0040: jxf22 chip found @ 0x40 (i2c0)
[   54.809097] tx_isp: Registered sensor subdevice jxf22 0-0040
[   55.397349] ###### image_tuning_v4l2_open 4219 #######
[   55.438896] &&& chan1  scaler.max_width = 1920 max_height = 1080  min_width = 128 min_height = 128 &&&
[   56.353633] codec_set_device: set device: MIC...
Jan  1 00:00:59 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:59 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:59 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:59 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:59 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:00:59 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:05 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:05 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:05 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:05 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:05 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:05 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
[   68.449942] RTL871X: rtw_cmd_thread: DriverStopped(True) SurpriseRemoved(False) break at line 564
[   68.501043] RTL871X: rtw_dev_unload: driver not in IPS
Jan  1 00:01:08 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:08 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:08 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:08 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:08 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:08 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
[   69.191149] ==> rtl8188e_iol_efuse_patch 
Jan  1 00:01:09 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:09 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:09 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:09 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:09 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:09 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
[   76.436145] RTL871X: assoc success
Jan  1 00:01:16 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:16 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:16 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:16 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:16 mDNSRes[   76.494777] RTL871X: set group key camid:1, addr:00:00:00:00:00:00, kid:1, type:AES
ponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:16 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:16 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:16 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:16 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:16 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:16 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:01:16 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
[  330.269773] RTL871X: rtw_cmd_thread: DriverStopped(True) SurpriseRemoved(False) break at line 564
[  330.327770] RTL871X: rtw_dev_unload: driver not in IPS
Jan  1 00:05:30 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:30 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:30 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:30 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:30 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:30 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:30 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:30 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:30 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
[  330.954366] ==> rtl8188e_iol_efuse_patch 
Jan  1 00:05:31 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:31 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:31 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:31 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:31 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:31 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:31 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:31 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:31 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:40 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:40 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:40 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:40 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:40 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:40 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
[  341.663469] RTL871X: rtw_set_802_11_connect(wlan0)  fw_state=0x00000008
[  346.168825] RTL871X: start auth
Jan  1 00:05:49 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:49 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:49 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:49 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:49 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:49 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:55 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:55 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:55 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:55 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:55 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:05:55 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:01 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:01 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:01 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:01 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:01 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:01 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:08 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:08 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:08 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:08 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:08 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:08 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:14 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:14 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:14 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:14 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:14 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:14 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:20 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:20 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:20 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:20 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:20 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:20 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:26 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:26 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:26 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:26 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:26 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:26 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:33 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:33 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:33 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:33 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:33 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:33 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:39 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:39 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:39 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:39 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:39 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:39 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
[  400.295498] RTL871X: rtw_cmd_thread: DriverStopped(True) SurpriseRemoved(False) break at line 564
[  400.340166] RTL871X: rtw_dev_unload: driver not in IPS
Jan  1 00:06:40 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:40 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:40 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
[  400.971393] ==> rtl8188e_iol_efuse_patch 
Jan  1 00:06:41 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:41 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:41 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:41 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:41 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:41 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:41 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:41 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:41 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
[  405.787068] RTL871X: assoc success
Jan  1 00:06:45 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:45 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:45 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
[  405.844728] RTL871X: set group key camid:1, addr:00:00:00:00:00:00, kid:1, type:AES
Jan  1 00:06:45 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:45 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:45 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:45 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:45 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:45 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:45 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:45 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!
Jan  1 00:06:45 mDNSResponderPosix: Default: mDNSPosix.c:mDNSPlatformSetAllowSleep(): NOT IMPLEMENTED!

boot_without_CFW

U-Boot SPL 2013.07 (Sep 15 2017 - 10:31:19)
pll_init:365
l2cache_clk = 375000000
pll_cfg.pdiv = 8, pll_cfg.h2div = 4, pll_cfg.h0div = 4, pll_cfg.cdiv = 1, pll_cfg.l2div = 2
nf=30 nr = 1 od0 = 1 od1 = 1
cppcr is 03c05100
CPM_CPAPCR 03b0890d
nf=42 nr = 1 od0 = 1 od1 = 1
cppcr is 02a04900
CPM_CPMPCR 07d0c90d
nf=50 nr = 1 od0 = 1 od1 = 1
cppcr is 03204900
CPM_CPVPCR 0320490d
cppcr 0x9a794410
apll_freq 712704000 
mpll_freq 1000000000 
vpll_freq = 1200000000
ddr sel mpll, cpu sel apll
ddrfreq 500000000
cclk  712704000
l2clk 356352000
h0clk 250000000
h2clk 250000000
pclk  125000000
DDRC_DLP:0000f003

U-Boot 2013.07 (Sep 15 2017 - 10:31:19)

Board: ISVP (Ingenic XBurst T20 SoC)
DRAM:  64 MiB
Top of RAM usable for U-Boot at: 84000000
Reserving 399k for U-Boot at: 83f9c000
Reserving 32784k for malloc() at: 81f98000
Reserving 32 Bytes for Board Info at: 81f97fe0
Reserving 124 Bytes for Global Data at: 81f97f64
Reserving 128k for boot params() at: 81f77f64
Stack Pointer at: 81f77f48
Now running in RAM - U-Boot at: 83f9c000
MMC:   msc: 0
the manufacturer c8
SF: Detected GD25Q128

*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
misc_init_r before change the yellow_gpio
gpio_request lable = yellow_gpio gpio = 38
misc_init_r after gpio_request the yellow_gpio ret is 38
misc_init_r after change the yellow_gpio ret is 0
misc_init_r before change the blue_gpio
gpio_request lable = blue_gpio gpio = 39
misc_init_r after gpio_request the blue_gpio ret is 39
misc_init_r after change the blue_gpio ret is 1
gpio_request lable = night_gpio gpio = 81
misc_init_r after gpio_request the night_gpio ret is 81
misc_init_r after change the night_gpio ret is 0
gpio_request lable = night_gpio gpio = 25
misc_init_r after gpio_request the night_gpio ret is 25
misc_init_r after change the night_gpio ret is 0
gpio_request lable = night_gpio gpio = 49
misc_init_r after gpio_request the night_gpio ret is 49
misc_init_r after change the night_gpio ret is 0
gpio_request lable = USB_able_gpio gpio = 47
misc_init_r after gpio_request the USB_able_gpio ret is 47
misc_init_r after change the USB_able_gpio ret is 1
gpio_request lable = TF_able_gpio gpio = 43
misc_init_r after gpio_request the TF_able_gpio ret is 43
misc_init_r after change the TF_able_gpio ret is 1
gpio_request lable = SPK_able_gpio gpio = 63
misc_init_r after gpio_request the SPK_able_gpio ret is 63
misc_init_r after change the SPK_able_gpio ret is 0
gpio_request lable = SD_able_gpio gpio = 48
misc_init_r after gpio_request the SD_able_gpio ret is 48
misc_init_r after change the SD_able_gpio ret is 0
Hit any key to stop autoboot:  0 
jiabo_do_auto_update!!!!!!!!!!!!!!!!!!!!!!!!
gpio_request lable = sdupgrade gpio = 46
the manufacturer c8
SF: Detected GD25Q128

jiabo_update_to_flash!!!!!!!!!!!!!!!!!!!!!!!!
jiabo_au_do_update!!!!!!!!!!!!!!!!!!!!!!!!
start=0
start=40000
len=40000
flash check read...
FWGRADEUP not find !!!!!!!!!
gradeup check fail!!!!!!!!!!!!!!!!!!!
the manufacturer c8
SF: Detected GD25Q128

Erasing SPI flash...addr align as 10000 !
sfc erase error
the manufacturer c8
SF: Detected GD25Q128

--->probe spend 4 ms
SF: 2621440 bytes @ 0x40000 Read: OK
--->read spend 339 ms
## Booting kernel from Legacy Image at 80600000 ...
   Image Name:   Linux-3.10.14
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1805541 Bytes = 1.7 MiB
   Load Address: 80010000
   Entry Point:  803e30f0
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.14 (root@ubuntu) (gcc version 4.7.2 (Ingenic r2.3.3 2016.12) ) #21 PREEMPT Thu Oct 19 11:38:16 CST 2017
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 RESET ERROR PC:1477E211
[    0.000000] CPU0 revision is: 00d00101 (Ingenic Xburst)
[    0.000000] FPU revision is: 00b70000
[    0.000000] CCLK:712MHz L2CLK:356Mhz H0CLK:200MHz H2CLK:200Mhz PCLK:100Mhz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 0051b000 @ 00010000 (usable)
[    0.000000]  memory: 00035000 @ 0052b000 (usable after init)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 028b9000 @ 00000000 (usable)
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x028b8fff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x028b8fff]
[    0.000000] Primary instruction cache 32kB, 8-way, VIPT, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] pls check processor_id[0x00d00101],sc_jz not support!
[    0.000000] MIPS secondary cache 128kB, 8-way, linesize 32 bytes.
[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 10343
[    0.000000] Kernel command line: console=ttyS1,115200n8 mem=41700K@0x0 ispmem=8M@0x28B9000 rmem=15644K@0x30B9000 init=/linuxrc rootfstype=squashfs root=/dev/mtdblock2 rw mtdparts=jz_sfc:256k(boot),2048k(kernel),3392k(root),640k(driver),4736k(appfs),2048k(backupk),640k(backupd),2048k(backupa),256k(config),256k(para),-(flag)
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 35192k/41700k available (3951k kernel code, 6508k reserved, 1276k data, 212k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:418
[    0.000000] clockevents_config_and_register success.
[    0.000028] Calibrating delay loop... 709.42 BogoMIPS (lpj=3547136)
[    0.057699] pid_max: default: 32768 minimum: 301
[    0.062744] Mount-cache hash table entries: 512
[    0.067960] Initializing cgroup subsys debug
[    0.072225] Initializing cgroup subsys freezer
[    0.079780] regulator-dummy: no parameters
[    0.084057] NET: Registered protocol family 16
[    0.109162] bio: create slab <bio-0> at 0
[    0.116039] jz-dma jz-dma: JZ SoC DMA initialized
[    0.121302] SCSI subsystem initialized
[    0.125387] usbcore: registered new interface driver usbfs
[    0.130930] usbcore: registered new interface driver hub
[    0.136430] usbcore: registered new device driver usb
[    0.141735] i2c-gpio i2c-gpio.1: using pins 57 (SDA) and 58 (SCL)
[    0.148028]  (null): set:249  hold:250 dev=100000000 h=500 l=500
[    0.154158] media: Linux media interface: v0.10
[    0.158760] Linux video capture interface: v2.00
[    0.165950] Switching to clocksource jz_clocksource
[    0.171619] jz-dwc2 jz-dwc2: cgu clk gate get error
[    0.176625] cfg80211: Calling CRDA to update world regulatory domain
[    0.183088] jz-dwc2 jz-dwc2: regulator vbus get error
[    0.188147] DWC IN OTG MODE
[    0.341060] sft id =========================off
[    0.345682] dwc2 dwc2: Keep PHY ON
[    0.349055] dwc2 dwc2: Using Buffer DMA mode
[    0.552755] dwc2 dwc2: Core Release: 3.00a
[    0.556870] dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller
[    0.563229] dwc2 dwc2: new USB bus registered, assigned bus number 1
[    0.570769] hub 1-0:1.0: USB hub found
[    0.574588] hub 1-0:1.0: 1 port detected
[    0.578654] dwc2 dwc2: DWC2 Host Initialized
[    0.583229] NET: Registered protocol family 2
[    0.588289] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.595277] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.601678] TCP: Hash tables configured (established 512 bind 512)
[    0.607986] TCP: reno registered
[    0.611220] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.617122] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.623820] NET: Registered protocol family 1
[    0.628551] RPC: Registered named UNIX socket transport module.
[    0.634574] RPC: Registered udp transport module.
[    0.639267] RPC: Registered tcp transport module.
[    0.644054] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.651185] freq_udelay_jiffys[0].max_num = 10
[    0.655616] cpufreq  udelay  loops_per_jiffy 
[    0.660046] dwc2 dwc2: ID PIN CHANGED!
[    0.663905] init DWC as A_HOST
[    0.666951] 12000     59724   59724  
[    0.670189] 24000     119448  119448 
[    0.673766] 60000     298620  298620 
[    0.677136] 120000    597241  597241 
[    0.680667] 200000    995402  995402 
[    0.684323] 300000    1493103     1493103    
[    0.687957] 600000    2986206     2986206    
[    0.691691] 792000    3941793     3941793    
[    0.695373] 1008000   5016827     5016827    
[    0.699169] 1200000   5972413     5972413    
[    0.709615] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.716732] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.723431] msgmni has been set to 68
[    0.728743] io scheduler noop registered
[    0.732817] io scheduler cfq registered (default)
[    0.739600] jz-uart.1: ttyS1 at MMIO 0x10031000 (irq = 58) is a uart1
[    0.748257] console [ttyS1] enabled, bootconsole disabled
[    0.748257] console [ttyS1] enabled, bootconsole disabled
[    0.764440] brd: module loaded
[    0.770092] loop: module loaded
[    0.774414] zram: Created 2 device(s) ...
[    0.778644] logger: created 256K log 'log_main'
[    0.784145] jz SADC driver registeres over!
[    0.789619] jz TCU driver register completed
[    0.794799] the id code = c84018, the flash name is GD25Q127C
[    0.800723] JZ SFC Controller for SFC channel 0 driver register
[    0.806937] 11 cmdlinepart partitions found on MTD device jz_sfc
[    0.813145] Creating 11 MTD partitions on "jz_sfc":
[    0.818173] 0x000000000000-0x000000040000 : "boot"
[    0.823801] 0x000000040000-0x000000240000 : "kernel"
[    0.829535] 0x000000240000-0x000000590000 : "root"
[    0.835177] 0x000000590000-0x000000630000 : "driver"
[    0.840995] 0x000000630000-0x000000ad0000 : "appfs"
[    0.846691] 0x000000ad0000-0x000000cd0000 : "backupk"
[    0.852613] 0x000000cd0000-0x000000d70000 : "backupd"
[    0.858461] 0x000000d70000-0x000000f70000 : "backupa"
[    0.864394] 0x000000f70000-0x000000fb0000 : "config"
[    0.870200] 0x000000fb0000-0x000000ff0000 : "para"
[    0.875888] 0x000000ff0000-0x000001000000 : "flag"
[    0.881533] SPI NOR MTD LOAD OK
[    0.884849] tun: Universal TUN/TAP device driver, 1.6
[    0.890051] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.896623] usbcore: registered new interface driver zd1201
[    0.902457] usbcore: registered new interface driver r8152
[    0.908203] usbcore: registered new interface driver usb-storage
[    0.914573] usbcore: registered new interface driver usbserial
[    0.920625] usbcore: registered new interface driver usbserial_generic
[    0.927429] usbserial: USB Serial support registered for generic
[    0.933676] usbcore: registered new interface driver ch341
[    0.939357] usbserial: USB Serial support registered for ch341-uart
[    0.945868] usbcore: registered new interface driver cp210x
[    0.951670] usbserial: USB Serial support registered for cp210x
[    0.957822] usbcore: registered new interface driver pl2303
[    0.963621] usbserial: USB Serial support registered for pl2303
[    1.469625] i8042: i8042 controller selftest timeout
[    1.475352] jzmmc_v1.2 jzmmc_v1.2.0: vmmc regulator missing
[    1.521008] jzmmc_v1.2 jzmmc_v1.2.0: register success!
[    1.526384] jzmmc_v1.2 jzmmc_v1.2.1: vmmc regulator missing
[    1.571912] jzmmc_v1.2 jzmmc_v1.2.1: register success!
[    1.577374] hidraw: raw HID events driver (C) Jiri Kosina
[    1.583282] usbcore: registered new interface driver usbhid
[    1.589022] usbhid: USB HID core driver
[    1.593318] TCP: cubic registered
[    1.596740] NET: Registered protocol family 17
[    1.602574] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    1.609714] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.622918] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.630622] Freeing unused kernel memory: 212K (8052b000 - 80560000)
[    1.773548] dwc2 dwc2:  ++OTG Interrupt: A-Device Timeout Change++
mdev is ok......
Trying to mount SDCard...
Trying to mount SDCard...
Trying to mount SDCard...
Trying to mount SDCard...
Trying to mount SDCard...
Trying to mount SDCard...
Trying to mount SDCard...
Couldnt mount, starting normal...

Ingenic-uc1_1 login: [    9.174669] register all isp device successfully!
[    9.184967] @@@@ tx-isp-probe ok @@@@@
[    9.239823] exFAT: Version 1.2.9
[    9.273046] motor_probe743
[    9.317437] jz_codec_register: probe() successful!
[    9.671366] dma dma0chan24: Channel 24 have been requested.(phy id 7,type 0x06 desc a1da1000)
[    9.680656] dma dma0chan25: Channel 25 have been requested.(phy id 6,type 0x06 desc a1ca6000)
[   10.222618] RTL871X: module init start
[   10.226492] RTL871X: rtl8189es v4.3.18.3_20185.20161116_pmpinclu_mac_monitor_minMem_EDCA542B_pbyr
[   10.237962] RTL871X: build time: Oct 19 2017 11:54:52
[   10.243269] wlan power on
[   10.261460] RTL871X: module init ret=0
[   10.275117] jz_pwm_probe[198] d_name = tcu_chn0
[   10.289489] request pwm channel 0 successfully
[   10.296921] pwm-jz pwm-jz: jz_pwm_probe register ok !
[   10.321109] mmc1: new SDIO card at address 0001
[   10.339735] bFWReady == _FALSE call reset 8051...
[   10.372837] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=c0:6d:1a:f7:cd:73
GPIO 40   in  
GPIO 26   out  
GPIO 25   out  
GPIO 49   out  
GPIO 47   out  
GPIO 48   out  
GPIO 43   out  
right_count=3  value=0 last_value=0
right_count=3  value=0 last_value=0
right_count=3  value=0 last_value=0
right_count=3  value=0 last_value=0
right_count=3  value=0 last_value=0
right_count=3  value=0 last_value=0
right_count=3  value=0 last_value=0
right_count=3  value=0 last_value=0
right_count=3  value=0 last_value=0
right_count=3  value=0 last_value=0
not in singleboard test
hello Guozhixin OKOKOKOKOKOKOKOKOKOK
xxq:begin to check the sensor ty[   15.283946] name : i2c-gpio1 nr : 1
pe
[   15.292992] name : i2c0 nr : 0
[   15.356778]  sensor_read: addr=0xa value = 0xf
[   15.361777]  sensor_read: addr=0xb value = 0x22
[   15.366451] info: success sensor find : jxf22
##### sensor : jxf22
[   15.371158] misc sinfo_release
[   15.398062] zram0: detected capacity change from 0 to 16777216
Setting up swapspace version 1, size = 16773120 bytes
UUID=d1e4c598-c137-4078-acb5-ed6e0e7f98f3
[   15.419310] Adding 16380k swap on /dev/zram0.  Priority:-1 extents:1 across:16380k SS
--------------------WDIOC_SETTIMEOUT  0 -------------------- 
--------------------WDIOS_ENABLECARD  0 -------------------- 
--------------------WDIOC_KEEPALIVE  0 -------------------- 
Init WatchDog  !!!!
msg_queue_remove_by_key_a: No such file or directory
msg_queue_remove_by_key_a: No such file or directory
msg_queue_remove_by_key_a: No such file or directory
/etc/app/test_UP /etc/app/test_UP /etc/app/test_UP START START 
/bin/sh: can't create /sys/block/mmcblk0/queue/scheduler: nonexistent directory
INIT App INFO XXXXXXXXXXXXXXXXXXXXXXXXXX
uuuuuuuuuuuuuuuuuuuuu000
-------------------------------------open gpio 46 direction 
-------------------------------------open gpio 25 direction 
gpio -------------  /sys/class/gpio/gpio25/value  0  
-------------------------------------open gpio 26 direction 
gpio -------------  /sys/class/gpio/gpio26/value  0  
-------------------------------------open gpio 38 direction 
gpio -------------  /sys/class/gpio/gpio38/value  0  
-------------------------------------open gpio 39 direction 
gpio -------------  /sys/class/gpio/gpio39/value  0  
-------------------------------------open gpio 49 direction 
gpio -------------  /sys/class/gpio/gpio49/value  0  
-------------------------------------open gpio 47 direction 
gpio -------------  /sys/class/gpio/gpio47/value  0  
-------------------------------------open gpio 48 direction 
gpio -------------  /sys/class/gpio/gpio48/value  0  
-------------------------------------open gpio 43 direction 
gpio -------------  /sys/class/gpio/gpio43/value  0  
-------------------------------------open gpio 62 direction 
-------------------------------------open gpio 62 direction error
open gpio direction: No such file or directory
motorport_open success
motor_open: success
pin num == 62
pin num == 62
pin num == 62
pin num == 62
++++++++++++++++++++++++++++++14
current thread stack size:8388608
set thread stack size:1048576
1979786480
current thread stack size:8388608
set thread stack size:1048576
1978737904
++++++++++++++++++++++++++++++14
-------------------------------------open gpio 48 direction 
gpio -------------  /sys/class/gpio/gpio48/value  0  
-------------------------------------open gpio 43 direction 
gpio -------------  /sys/class/gpio/gpio43/value  0  
nRead acBuf[nReadLen-1] = a
nRead acBuf[nReadLen-1] = a
[START] test CONFIG_INFO_FIRMWARE = 5.5.1.243
[START] Cam_firmware_HTTP = 5.5.1.243
[START] CONFIG_INFO_FIRMWARE = 5.5.1.243
<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
             FIRM WARE VERSION : 5.5.1.243

<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
g_stConfigTable[0] Wifi_Mode = D
g_stConfigTable[1] Wifi_Active = y
g_stConfigTable[2] Wifi_IP = 192.168.1.68
g_stConfigTable[3] Wifi_Subnet = 255.255.255.0
g_stConfigTable[4] Wifi_Gateway = 192.168.1.1
g_stConfigTable[5] Wifi_DNS = 192.168.1.1
g_stConfigTable[6] Wired_IP = 192.168.1.68
g_stConfigTable[7] Wired_Mode = D
g_stConfigTable[8] Wired_Subnet = 255.255.255.0
g_stConfigTable[9] Wired_Gateway = 192.168.1.1
g_stConfigTable[10] Wired_DNS = 192.168.1.1
g_stConfigTable[11] Alarm_Motion_Switch = y
g_stConfigTable[12] Alarm_Motion_Sensitivity = 5
g_stConfigTable[13] Alarm_Motion_Region = 0,0;0,0
g_stConfigTable[14] Alarm_Audio_Switch = y
g_stConfigTable[15] Alarm_Audio_Sensitivity = 5
g_stConfigTable[16] Alarm_Audio_SmokeYXMOD = 200
g_stConfigTable[17] Alarm_pir_Switch = n
g_stConfigTable[18] Light_Net = y
g_stConfigTable[19] Light_Night = y
g_stConfigTable[20] Video_IPS = 30
g_stConfigTable[21] Video_Bright = 7
g_stConfigTable[22] Video_Constract = 3
g_stConfigTable[23] Video_Hflip = 1
g_stConfigTable[24] Video_Vflip = 1
g_stConfigTable[25] Video_Rate = 50
g_stConfigTable[26] Video_Sample = 10
g_stConfigTable[27] Video_OSD = 1
g_stConfigTable[28] Audio_Channel = 1
g_stConfigTable[29] Audio_Sample = 8000
g_stConfigTable[30] Audio_Volume = 1
g_stConfigTable[31] Device_State = u
g_stConfigTable[32] Config_Version = 
g_stConfigTable[33] HW_Version = 
g_stConfigTable[34] SW_Version = 
g_stConfigTable[35] Server_URL = apicn.hualaikeji.com
g_stConfigTable[36] P2p_UID = 
g_stConfigTable[37] Camera_Type = DF3
g_stConfigTable[38] Camera_Mqtt_Server = bzycn.ismartalarm.com
g_stConfigTable[39] Camera_UID = YHH3LWJYU9PF6621111A
g_stConfigTable[40] Camera_AP_Key = 
g_stConfigTable[41] Camera_AP_Station = 0
g_stConfigTable[42] Camera_following = 0
g_stConfigTable[43] Camera_set_cruise = 0
g_stConfigTable[44] Camera_control_cruise = 0
g_stConfigTable[45] motor_sleep_move = 0
g_stConfigTable[46] Camera_following_sensivity = 0
g_stConfigTable[47] Motor_Origin_Positision = 1300,350
g_stConfigTable[48] Xiaomi_Server_Str = 
g_stConfigTable[49] usb_enable_value = 1
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@the NETRELATED_MAC is 34CE00AF0A5534CE00AF0A55D01C0000@@@@@@@@@@@@@@@@@@@@@@
test_UP plant form [guoke]
sonix test!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
g_nMsgQueueIdg_nMsgQueueIdg_nMsgQueueId = 0
1994282240
1985893632
msg_queue_rcv time: 57FBBB01, id: 0, type: 2001, cmd: 2009
[test_UP] 01/sbin/ifconfig wlan0 down
msg_queue_rcv time: 57FBBB01, id: 0, type: 2001, cmd: 2009
[test_UP] 01/sbin/ifconfig wlan0 hw ether 34:CE:00:AF:0A:55
msg_queue_rcv time: 57FBBB01, id: 0, type: 2001, cmd: 2009
[test_UP] 01/sbin/ifconfig wlan0 up
[   17.511053] ==> rtl8188e_iol_efuse_patch 
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@the NETRELATED_IP is nPYo9tABWJNZhuaT4e8KzoEoFiMn7l+AHo2G7STBUXUCqL04fvU5s9UeuHgU9Ddr+IFhNG4FW8p4Vc4iwG/qPcKMWW/lGXCFwzIvOqXGhnR3HFHpH5hXV/8WUrR7pTH6PCMs88IkLv//T0yZQYFEU0Z4Z5Cux8T3HkxBlE1KJfc=AQAB00003d8d@@@@@@@@@@@@@@@@@@@@@@
++++++++++++++++++++++++++++++1
Come Create Video Capture Thread!
current thread stack size:8388608
set thread stack size:1048576
1977689328
current thread stack size:8388608
set thread stack size:1048576
1976640752
++++++++++++++++++++++++++++++1
++++++++++++++++++++++++++++++3
current thread stack size:8388608
set thread stack size:1048576
1975592176
++++++++++++++++++++++++++++++3
++++++++++++++++++++++++++++++4
current thread stack size:8388608
set thread stack size:1048576
1974543600
++++++++++++++++++++++++++++++4
++++++++++++++++++++++++++++++2
current thread stack size:8388608
set thread stack size:1048576
1973495024
++++++++++++++++++++++++++++++2
++++++++++++++++++++++++++++++6
current thread stack size:8388608
set thread stack size:1048576
1972446448
++++++++++++++++++++++++++++++6
++++++++++++++++++++++++++++++7
current thread stack size:8388608
set thread stack size:1048576
1971397872
++++++++++++++++++++++++++++++7
++++++++++++++++++++++++++++++8
current thread stack size:8388608
set thread stack size:1048576
1970349296
++++++++++++++++++++++++++++++8
[GUOZHIXIN]AC_thread_init  8536 
[GUOZHIXIN]audio_alarm_para_init  2364 
[GUOZHIXIN]cloud_thread_init  8376 
g_pstCloudInfo->threadMsgId = 65538
g_pstCloudInfo->processMsgId = 32769
g_pstCloudInfo->acServerDomainAddr = apicn.hualaikeji.com
FUNC VC_video_thread, line is 197, thread start time is 1476115202
Come Start Video Capture Thread! Main loop========================
cloud init ok okok okok okok okok ok
NewsChannel thread start success
[GUOZHIXIN]networkset_thread  2056 
network init ok, creat check thread ok
NewsChannel_usrInfoClear: success
NewsChannel initialize success
[GUOZHIXIN]NewsChannel_threadRun  1356 
NewsChannel thread synchronization start
[GUOZHIXIN]VC_video_thread  1000 
VC_thread_init  396080  
FUNC VC_video_thread, line is 216, thread init end time is 1476115202
[   18.630881] codec_set_device: set device: speaker...
++++++++++++++++++++++++++++++10
current thread stack size:8388608
set thread stack size:1048576
1960563952
++++++++++++++++++++++++++++++10
++++++++++++++++++++++++++++++11
current thread stack size:8388608
set thread stack size:1048576
1959515376
++++++++++++++++++++++++++++++11
++++++++++++++++++++++++++++++15
current thread stack size:8388608
set thread stack size:1048576
1958466800
++++++++++++++++++++++++++++++15
++++++++++++++++++++++++++++++18
current thread stack size:8388608
set thread stack size:1048576
1957418224
current thread stack size:8388608
set thread stack size:1048576
1956369648
++++++++++++++++++++++++++++++18
++++++++++++++++++++++++++++++20
current thread stack size:8388608
set thread stack size:1048576
1955321072
++++++++++++++++++++++++++++++20
++++++++++++++++++++++++++++++20
current thread stack size:8388608
set thread stack size:1048576
1954272496
++++++++++++++++++++++++++++++20
++++++++++++++++++++++++++++++22
current thread stack size:8388608
set thread stack size:1048576
1953223920
++++++++++++++++++++++++++++++22
Alarm_set_load_File
jiabo_serial_port_lmsgid=65538
jiabo_serial_port_rmsgid=32769
[GUOZHIXIN]udpServer_init  2620 
[GUOZHIXIN]ioctl_thread  1032 
get_config_item_value(CONFIG_LIGHT_NIGHT       y    
==================================jiabo_ioctl_ircut_on=============================
[GUOZHIXIN]local_storage_module_init  6024392 
[GUOZHIXIN]user_control_module_init  424 
current thread stack size:8388608
set thread stack size:1048576
1946146032
1111111111111111111111111111111111111111111111111111110ret=0
=============================jiabo_ioctl_ircut_off===========================
current thread stack size:8388608
set thread stack size:1048576
1945097456
current thread stack size:8388608
set thread stack size:1048576
1944048880
current thread stack size:8388608
set thread stack size:1048576
1943000304
XIAOMI_THREAD get Str 34CE00AF0A55|63912496|F9uJONM4FQtsf1cc|2820 
34CE00AF0A55 
63912496 
F9uJONM4FQtsf1cc 
2820 
child_process_init: success
child process synchronization start, time is 1476115203
get valid flag =  0
CC THREAD START
IOTC_Initialize2 success 
????????????????????????????IOTC_Get_Version   33622025  ??????????????????????????
[samba] set time 0, 8
[samba] set time 1, 17
stLocalStorage.threadMsgIdstLocalStorage.threadMsgIdstLocalStorage.threadMsgId = 65538
current thread stack size:8388608
set thread stack size:1048576
1924662512
[samba] set time 2, 25
[samba] set time 3, 25
******* sd_ready 0, sd_long 1 timezone_min 25200********
current thread stack size:8388608
set thread stack size:1048576
1923613936
current thread stack size:8388608
set thread stack size:1048576
1922565360
current thread stack size:8388608
set thread stack size:1048576
1921516784
current thread stack size:8388608
set thread stack size:1048576
1920468208
current thread stack size:8388608
set thread stack size:1048576
1919419632
local_storage_thread ok
[GUOZHIXIN]Xiaomi_Thread_Init  2064 
g_pstCloudInfo->threadMsgId = 65538
g_pstCloudInfo->processMsgId = 32769
++++++++++++++++++++++++++++++++child_process_synchronization ok++++++++++++++++++++++++
child process synchronization end, time is 1476115204
io module sync ok
Udp Server start success
NewsChannel thread synchronization stop
[GUOZHIXIN]G711_encode_thread  
FUNC VC_video_thread, line is 218, thread sync after time is 1476115204
read buf 22  ISA_VERSION=5.5.1.243
F9uJONM4FQtsf1cc  
write buf  ISA_VERSION=5.5.1.243
  22
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IR_CUT_STATE_CLOSE222222222222222!!!!!!!!!!!!!!!!!!!!!!!!!
jiabo_LED_STATE_OFF
!!!!!!!!!!!!=============================jiabo_ioctl_ircut_off===========================
*************************************************************
******************    begin Cooee      **************
*************************************************************
msg_queue_rcv time: 57FBBB04, id: 0, type: 2001, cmd: 2009
[test_UP] 01wpa_cli -p /var/run/wpa_supplicant -i wlan0 disconnect
Failed to connect to non-global ctrl_ifname: wlan0  error: No such file or directory
[   19.971249] codec_set_device: set device: MIC...
sample_system_init info: name is jxf22, i2c addr is 64
nPCMBufferSize  2048,nMaxOutputBytes  768
aac_encoder_init ret value:0
[   20.197507] set sensor gpio as PA-low-10bit
[GUOZHIXIN]AAC_decode_thread  6144 
[   20.234646] jxf22 0-0040: jxf22 chip found @ 0x40 (i2c0)
AudioAlarmMain: level=-43
[   20.241508] tx_isp: Registered sensor subdevice jxf22 0-0040
set safe_suppression_value 1.500000 
[   20.575192] motor_ops_reset468
                                        1476115205...54.508659
xiaomi_client_station 0 
aecMode = 0
dtdEnable = 1
dtdBandNum = 4
dtdPowThd = 22407710.000000
dtdDxRatio = 0.100000
safeSupression = 1.500000
[   21.430590] ###### image_tuning_v4l2_open 4219 #######
the org sensor fps_num is 15, fps_den is 1
i264e[info]: profile Main, level 4.0
IMP_Encoder_SetMbRC_ENABLE!!!
i264e[info]: profile Main, level 2.2
******sample_framesource_streamon test to enable frame channel is 0***********
[   21.576257] &&& chan1  scaler.max_width = 1920 max_height = 1080  min_width = 128 min_height = 128 &&&
[chn0] scaler->outwidth = 1920 scaler->outheight = 1080, sscaler[   21.590818] &&& chan2  scaler.max_width = 800 max_height = 800  min_width = 128 min_height = 128 &&&
.outwidth = 1920 sscaler.outheight = 1080
******sample_framesource_streamon test to enable frame channel is 1***********
[chn1] scaler->outwidth = 640 scaler->outheight = 360, sscaler.outwidth = 640 sscaler.outheight = 360
(((((((((((((((((jiabo_OSD_VC_OSD_set   0   1  )))))))))))))))))))
-----------------------------Video After Sync!!
-----------------------------Video After begin!!
*********************************video_channel[].resolution**** 7 *********************
@@@@@@@@@@@@@@@Apps set the bitrate is 400@@@@@@@@@@@@@@
******stop_framesource_channel test to disable frame channel is 0***********
current dac value is 0
############stop_framesource_channel ret is 0###############
i264e[info]: profile Main, level 4.0
IMP_Encoder_SetMbRC_DISABLE!!!
******start_framesource_channel [   22.607363] &&& chan1  scaler.max_width = 1920 max_height = 1080  min_width = 128 min_height = 128 &&&
test to enable frame channel is 0***********
[chn0] scaler->outwidth = 1920 scaler->outheight = 1080, sscaler.outwidth = 1920 sscaler.outheight = 1080
((((((((((((((((((((????????????????????????????))))))))))))))))))))) 
((((((((((((((((((((Video_Code_Status_N  is  1   1  ))))))))))))))))))))) 
((((((((((((((((((((????????????????????????????))))))))))))))))))))) 
((((((((((((((((((((????????????????????????????))))))))))))))))))))) 
((((((((((((((((((((Video_Jpeg_Status  is  2   ))))))))))))))))))))) 
((((((((((((((((((((????????????????????????????))))))))))))))))))))) 
((((((((((((((((((((????????????????????????????))))))))))))))))))))) 
((((((((((((((((((((Video_Code_Status_N  is  3   1  ))))))))))))))))))))) 
((((((((((((((((((((????????????????????????????))))))))))))))))))))) 
current dac value is 0
((((((((((((((((((((????????????????????????????))))))))))))))))))))) 
((((((((((((((((((((Video_Code_Status_N  is  4   1  ))))))))))))))))))))) 
((((((((((((((((((((????????????????????????????))))))))))))))))))))) 
[auto] param cType = 1
[auto] param cSegmentNum = 1
[auto] param >cIfFullTime = 1
[auto] param >cLoopType = 1
[auto] param date = 1111111
[AUTO] stSegInfo[0].cStartHour = 18
[AUTO] stSegInfo[0].cStartMin = 0
[AUTO] stSegInfo[0].usDurationTime = 1440
[AUTO] stSegInfo[0].nTimeStamp = 1
auto para switch = 1
Init g_stAutoRecordInfo.cSwitch = 1
auto para owner = 1
Init g_stAutoRecordInfo.cOwner = 1
auto switch_enable_time_r = 0
Init g_stAutoRecordInfo.nSwitchEnableTime = 0
g_stAutoRecordInfo.cSwitch = 1, cSwitch = 1
END END END END END END END END END END END END END END END 
[SD state] ^ ^ set_sd_card_state = 1
g_stNewestInfo = 1502380800 1502467199
[AUTO] set g_nNewestSdTime = 2

 after reading hid device:

hid device not found!

[add_device_information] is :[[add@/devices/platform/jz-i2c.0/i2c-0/0-0040]]\n[SD state] ^ ^ set_sd_card_state = 1
jiabo_SD_STATE_NO_SD44444444444444444444444444!!!!!!!!!!!!!!!!!!
set storage_action_notifystorage_action_notifystorage_action_notify
set storage_action_notifystorage_action_notifystorage_action_notify
set storage_action_notifystorage_action_notifystorage_action_notify
get_USB_state = 1,get_if_format_USB_state = 0 !!!!!!!!!!
set_USB_state = 1!!!!!!!!!!
add by wangfengbo USB_STATE_NOT_WORKUSB_STATE_NOT_WORKUSB_STATE_NOT_WORKUSB_STATE_NOT_WORKUSB_STATE_NOT_WORK
set storage_action_notifystorage_action_notifystorage_action_notify
set storage_action_notifystorage_action_notifystorage_action_notify
set storage_action_notifystorage_action_notifystorage_action_notify

 after reading hid device:

hid device not found!

nCurUseDev = CUR_USE_NO!!!!!!!!!!!!!
Do not need change nCurUseDev[0] g_nCurUseDev[0]
current dac value is 0
current dac value is 0
x_max_steps=2600,y_max_steps=700,x_cur_step=1300,y_cur_step=350
MOTOR_STOP
1300
350
move_positisionx=1300
move_positisiony=350
jb_motors_steps.x=0,jb_motors_steps.y=0
MOTOR_MOVE
SET_CONTROL_CAMERA_CRUISE_OFF 0 
current dac value is 0
local storage local storage local storage local storage 
local storage local storage local storage local storage 
local storage local storage local storage local storage 
local storage local storage local storage local storage 
local storage local storage local storage local storage 
msg_queue_rcvmsg_queue_rcvmsg_queue_rcvmsg_queue_rcvmsg_queue_rcvmsg_queue_rcvmsg_queue_rcv
LS: MSG_LS_T_RECORD_STATE = 0 (0:ready 1:stop)
VideoAlarm_Variable_Init  1014  
self->MotionSense  5  
@@@@@@@@@@@@ init_video_alarm_detection with lisence.txt @@@@@@@@@@@@@@ 
@@@@@@@@@@@@@@@@@@@@@ program version 1.2.43 @@@@@@@@@@@@@@@@@@@@@ 
@@@@@@@@@@@@@@@@@ Ingenic Processing started. @@@@@@@@@@@@@@@@@@@@
recv_Msg =13,  moving_detection_flag = 1, moving_detection_sensitivity =5 
IVS Version:1.0.5 built: May 26 2017 14:32:52
INFO(verify): Version: 1.2.0
current dac value is 0
current dac value is 0
>>>>>>>>>> setSaveAlarmFlag = 1 <<<<<<<<< 
@@@@@@@@@@@@@@@ send Moving_Alarm @@@@@@@@@@@@@@@@@@@@ 
xiaomi_client_station 0 
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
already to 30, new audio alarm start
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
>>>>>>>>>> setSaveAlarmFlag = 1 <<<<<<<<< 
@@@@@@@@@@@@@@@ send Moving_Alarm @@@@@@@@@@@@@@@@@@@@ 
xiaomi_client_station 0 
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
current dac value is 0
samba start samba start samba start samba start samba start 
current dac value is 0
jmtatsch commented 3 years ago

So obviously you have a problem at

/system/sdcard/scripts/wifi.sh

My guess without looking at it in depth is that your device cannot connect to your wifi in the allotted time frame and tries to open an access point and something goes wrong. Probably your Wi-Fi is weak or your credentials are messed up.

NickNameNemo commented 3 years ago

So obviously you have a problem at

/system/sdcard/scripts/wifi.sh

My guess without looking at it in depth is that your device cannot connect to your wifi in the allotted time frame and tries to open an access point and something goes wrong. Probably your Wi-Fi is weak or your credentials are messed up.

Thank you for replay me.

How can I check my WI-FI? My laptop shows me signal level is about :

MODE   CHAN    FREQ          RATE        SIGNAL     BARS     SECURITY   WPA-FLAGS  
Infra   1    2 412 MHz     65 Mbit/s     99       ▂▄▆█        WPA2           none)

and I add my credentials to wpa_supplicant.conf

NickNameNemo commented 3 years ago

In boot_with_CFW file some errors occur:

jiabo_do_auto_update!!!!!!!!!!!!!!!!!!!!!!!!
gpio_request lable = sdupgrade gpio = 46
the manufacturer c8
SF: Detected GD25Q128

jiabo_update_to_flash!!!!!!!!!!!!!!!!!!!!!!!!
jiabo_au_do_update!!!!!!!!!!!!!!!!!!!!!!!!
start=0
start=40000
len=40000
flash check read...
FWGRADEUP not find !!!!!!!!!
gradeup check fail!!!!!!!!!!!!!!!!!!!
the manufacturer c8
SF: Detected GD25Q128

Erasing SPI flash...addr align as 10000 !
sfc erase error
the manufacturer c8
SF: Detected GD25Q128

Is it possible to be reason of the issue? actually I don`t understand what does it mean.

NickNameNemo commented 3 years ago

In boot_with_CFW file some errors occur:

jiabo_do_auto_update!!!!!!!!!!!!!!!!!!!!!!!!
gpio_request lable = sdupgrade gpio = 46
the manufacturer c8
SF: Detected GD25Q128

jiabo_update_to_flash!!!!!!!!!!!!!!!!!!!!!!!!
jiabo_au_do_update!!!!!!!!!!!!!!!!!!!!!!!!
start=0
start=40000
len=40000
flash check read...
FWGRADEUP not find !!!!!!!!!
gradeup check fail!!!!!!!!!!!!!!!!!!!
the manufacturer c8
SF: Detected GD25Q128

Erasing SPI flash...addr align as 10000 !
sfc erase error
the manufacturer c8
SF: Detected GD25Q128

Is it possible to be reason of the issue? actually I don`t understand what does it mean.

jmtatsch commented 3 years ago

Dunno. I would recommend to s3earch the issues for it. Maybe its a factory broken boot loader? https://github.com/EliasKotlyar/Xiaomi-Dafang-Hacks/issues/1563

NickNameNemo commented 3 years ago

Problem was incompatibility my camera and router, even all other wifi devices connect without problem, camera can`t. After change router camera connected successfully. Thanks for help.