search

EliasKotlyar / Xiaomi-Dafang-Hacks

4.18k stars 1k forks source link

Is my cam bricked? Very odd behavior. #1794

Closed kram12085 closed 2 years ago

kram12085 commented 2 years ago

Wyzecam V2 running modified firmware. Was working fine for a few months then stopped working. When I connect to it, the admin panel appears malformed and none of the links work. I've tried re-partitioning the SD card, using a different SD card, and reflashing the bootloader. Every time I get the same resulting admin panel, which leads me to believe the issue is with the camera and not the firmware or SD card. Any thoughts?

dafang startup.log wifi.log

vswee commented 2 years ago

Is your camera daisy-chained, using an extra-long power lead or a power supply of less than 1A? Sometimes issues displaying the web interface and accessing the device via ssh can be due to low power.

kram12085 commented 2 years ago

Is your camera daisy-chained, using an extra-long power lead or a power supply of less than 1A? Sometimes issues displaying the web interface and accessing the device via ssh can be due to low power.

Nope, plugged in directly to an outlet with the OEM cable and adapter. The only options I can think of is maybe corrupted SD card or firmware, even though nothing stands out (to me at least) in the logs.

vswee commented 2 years ago

In case you haven't tried it; ssh-ing into the device and running /system/sdcard/autoupdate.sh can often sort out a myriad of firmware issues.

kram12085 commented 2 years ago

In case you haven't tried it; ssh-ing into the device and running /system/sdcard/autoupdate.sh can often sort out a myriad of firmware issues.

What fixed it was reformatting a different SD card and adding the mod firmware. What's odd is it took a couple of tries with two different cards, would get the same result making a 512 MB partition. I finally gave up and reformatted the card as 16 GB and that's what fixed it. I'm not sure if it's a faulty SD card or touchy system.