EloiStree
commented
3 years ago What to do ?
V1
- Collect dust at the source with dust collector
- Cover your noose and mouth
- What means N95?
- N is for gaz and other
- 95% = pourcent of small particules capture.
- Reusable respirator
V2
- Dust in micron scale = 0.001mm
- Most regular mask don't fit your face
- Pro mask are less painful to weak on long time.
- What is inside reusable mask
- Activated Carbon / Organic filter
- You can use sequence of filter
- Use air cleaner box
- But don't use it stupidly
- Don't put it between you and the source
- Try to make it works when you are not there
V3: How to maintain
- Clearn the valves
- Clean the mask
- Check the sealing of the vavle
- Do it once a month depending of your use
RZ mask
V4
Lost the timecode:
- Some shop have mask test to check that it fit you.
- If you can breath because your mask don't fit you, go change it in the store.
Ok, I have some respiratory problem and a wood smell that stay in the room. When I use a 95% protective dust box that I made. So it leads to a question: what does I risk to work near the CNC all day? (As it is mandatory to stay near the CNC in case of emergency procedure).