EmulatorArchive / uae-wii

Automatically exported from code.google.com/p/uae-wii
GNU General Public License v2.0
0 stars 0 forks source link

Mouse/keyboard #76

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago
What steps will reproduce the problem?
1.wireless mouse/keyboard at the same time
2.either only the mouse or the keyboard will work
3.when keyboard and mouse are attached the emulator ofrene freezes

What is the expected output? What do you see instead?

What version of the product are you using? On what operating system?
WiiUae v11 on a wii 4.3e with homebrew

Please provide any additional information below.
I can get the keyboard to work and also the mouse but not at the same time. I 
also have tried with a 4 port USB 2.0 hub without external powersupply. Right 
now the keyboard is attached in port 1 on the wii but i tried to swich between 
port 0 & 1. Mouse in port 0 keyboard port 1 and the other way around. I tried 
to connect the hub in port 0 & 1 and put the recievers for the wireless mouse 
and keyboard there to, but nohing works. I'm using logitech mouse and keyboard

Original issue reported on code.google.com by wiewa...@gmail.com on 11 Dec 2014 at 7:27

GoogleCodeExporter commented 9 years ago
This is not a proper Wii UAE issue.

The mouse and keyboard are managed by the low level libraries (ogc and 
libwiikeyboard) and by Nintendo IOS (typically 58).

It means the those libraries do not well support your mouse and keyboard.

You can try launching UAE wii with a different IOS or CIOS using a launcher 
(like Wiiflow and maybe wiixplorer).

I tested UAE Wii with my mouses and keyboards (also wireless) and they all work.

There is another report of wireless keyboard not working: 

https://code.google.com/p/uae-wii/issues/detail?id=63&can=1

Original comment by olimpier...@gmail.com on 12 Dec 2014 at 8:17

GoogleCodeExporter commented 9 years ago
Helle again. 
I have tried as you suggested (launching from wiixplorer & wiiflow) and 
unfortunally it did not solve the problem😞
Just in short. Do you think it could be that there is one reciever for both 
mouse and keyboard?

Original comment by wiewa...@gmail.com on 13 Dec 2014 at 8:06

GoogleCodeExporter commented 9 years ago
You should try using wiiflow with different IOS or CISO (e.g. 249) (there is a 
specific option for it) even if this likely does not solve the issue.

I do not think that one reciever for both mouse and keyboard will solve the 
issue even if I have never tried.

I think the issue is due to the incompatibility of some wireless device with 
the WII low level library. 

Original comment by olimpier...@gmail.com on 14 Dec 2014 at 9:57

GoogleCodeExporter commented 9 years ago
Hello again. 
Just a brief follow up. I will try bying a new mouse/keyboard with just one 
common reciever for both. 
Just yesterday i went through the issues on this side and many of the issues is 
about mouse jerkiness. 
Last night i tried to install Dmouse from fish disk 407 and that was a 
tremendous improvement. 
I have never experienced such a good and smooth respond from the wiimote on 
wiiuae. And the pointer stayed inside the screen all the time and responded 
very, very fast. 
You can tell people to try that. 😃👍

Original comment by wiewa...@gmail.com on 15 Dec 2014 at 6:07

GoogleCodeExporter commented 9 years ago
That's a very good piece of news. I have tried several solutions to fix the 
mouse jerkiness. I got only some improvements without a final fix.

I will soon test the program that you suggest.

Original comment by olimpier...@gmail.com on 15 Dec 2014 at 11:54

GoogleCodeExporter commented 9 years ago
I know it won't solve the problem like that but i experienced great 
improvements with that little program. 
I know it can be setup in the CLI/SHELL and it also can be run via the 
"s:/startup-sequence". In the setup i think it is possible to adjust the 
smoothness/reaction of the "mouse" eg wiimote. 
Good luck and thx for your great work. 
Right now i am "playing" with 3  X  1GB, 1 X 500 MB and 1 x 200 MB hardfiles 
thanks to v11 of UAE Wii. 
I also managed to make a bootable DH0 and i am working on WHDLOAD with a 
complete set of WHD files. 

Original comment by wiewa...@gmail.com on 15 Dec 2014 at 3:43

GoogleCodeExporter commented 9 years ago
At last success. 
Launching through wiiflow and a new set of mouse/keyboard and it all works. 
I don't know which IOS/CIOS wiiflow uses and not how i can change it?
Thank you for your advice and splendid work and a merry christmas🎅

Original comment by wiewa...@gmail.com on 19 Dec 2014 at 5:52

GoogleCodeExporter commented 9 years ago
Happy to see you have solved the issue.
There is an option to change the ios when you select the program to launch.

UAE wii can be also launched as plugin inside Wiiflow.

Abdallahterro included UAE wii inside his pack but he did not update it yet 
with the last Wii UAE version (he will).

See at the end of this page:

https://sites.google.com/site/wiiflowiki4/home

Merry Christmas

Original comment by olimpier...@gmail.com on 19 Dec 2014 at 8:26

GoogleCodeExporter commented 9 years ago
Thanks again. 

Looks very nice with that wiiflow install. 

I will wait untill UAE WII V11 appears to install/update the lot. 

Original comment by wiewa...@gmail.com on 21 Dec 2014 at 6:23