TODO for 4Pro

[encryptize]

• [x] Remove Model Lock
• [x] DPC
• [x] Remove Speed Check
• [x] Remove Charging Mode
• [x] No KERS
• [x] Motor Start Speed
• [x] CRC
• [x] Shutdown Time
• [x] Cruise Control Delay
• [x] Region-Free
• [x] Pedestrian -> Eco Mode
• [ ] Static Brakelight
• [ ] Auto-Light
• [x] Pedestrian No-Blink
• [x] Current-Meter (not planned)
• [ ] Button Swap (not planned)
• [x] Custom KERS
• [x] Speed Limit for each mode
• [x] Nominal Current
• [x] Maximum Current
• [x] Minimum Brake Current
• [x] Maximum Brake Current
• [x] Wheel Size
• [x] Baudrate
• [x] Voltage Limit

[dnandha]

Good job @Encryptize ! If you need a simpler version of the "Static Brakelight" Mod, check the old version: https://github.com/dnandha/firmware-patcher/blob/d49ad0054488a9df1ded10a4f5a2c8a8646dcc2f/patcher.py#L194 It does not support "Auto-Light" though.

[encryptize]

If you need a simpler version of the "Static Brakelight" Mod

@dnandha I have prepared a patch for the 4Pro, but I currently have no way to test it to see if it works properly. I don't have a controller with a working taillight, a common fault in this model. I will try this week to finish the remaining patches that do not require checking the tail light.