Open WLCIssuesBot opened 7 years ago
Comment by ldmldmldm
Thursday Aug 11, 2016 at 01:49 GMT
@psgarsenal no https://github.com/Cloudef/wlc/issues/166#issuecomment-237883598 does not solve the issue. I believe the profile is already flat, and there is something else screwing with the cursor when going rightwards and downwards.
Comment by ldmldmldm
Friday Aug 12, 2016 at 03:01 GMT
No. Weston works perfectly (with both mouse and touchpad) in all directions.
Comment by cafehaine
Monday Aug 29, 2016 at 06:48 GMT
Ok so I did some testing, and it turns out that "accel_profile flat" in sway does not solve my issue, and that it does not appear in weston, so this issue and mine (#166) are the same
Basically, to sum up both issues, there is a problem that causes slow movements to not be detected in certain directions, depending on the mouse. I don't know about the apple's trackpad, but it seems that our problem is still linked with hi-dpi mice
Comment by ldmldmldm
Wednesday Aug 31, 2016 at 00:09 GMT
@psgarsenal your linked issue seems to have different symptoms, are you now exhibiting my symptoms also?
Comment by cafehaine
Wednesday Aug 31, 2016 at 06:23 GMT
Symptoms were the same explained differently, i cannot move my mouse slowly, in the down-right direction, I just thought moving it in circle would show it better on video. It must be something with the hardware acting in a different way than "traditional mice", since, as you can see in my issue, a 5 buck mouse don't have this problem.
Comment by ldmldmldm
Wednesday Aug 31, 2016 at 07:01 GMT
Logitech B100 at 800dpi and Razer Deathadder Chroma at 1200dpi, Sigmachip at 800dpi
The Logitech I have at work shows the issue, but i'll check this again when I next go in.
Apple touchpad
Comment by MateusZitelli
Thursday Jan 05, 2017 at 11:14 GMT
Any updates on this? The issue persists with the actual master using Apple Touchpad.
Hi.
Moving really slowly (like 0.3cm/sec) results in the cursor not moving at all.
Note: on the touchpad I start from the middle to avoid any of the palm detection (which triggers if you start from top left or top right)
I confirmed I am using libinput on X using
My sway settings:
My X11 settings:
Version info:
Thanks.