2.3. Heater

[AaronITCL]

We will classify all the issues referenced to all the equipments and proccess validated by ITCL into 5 types, we will update this information in the future:

Process question

1. Display issues

EMSA doesn´t display this questions correctly in function of the conditions imposed.

2. Proposal

Currently the following question is asked depending of the type of heater, when it should be the power source Our proposal is: Please @SOCAMEX could you validate this?

Where:

3. Label of the ratios issue.

We miss recommended value and recommendation in P02E06F29

• The Recommended value should be "MEASURED"

• The Recommendation should be "Consider installing measurement equipments in all the main parameters that affect the energy efficiency from the pumping process, such as water flow and water consumption"

Ratio´s calculations

1. Missing heater efficiency ratio

Energy improvements identification

In validation process

Saving simulation

In validation process

Ratios display and comparison

In validation process

[WINGSTeam]

1. Display issues

Done

3. Label of the ratios issue.

Done

Ratio´s calculations

Done

[AaronITCL]

I make a mistake in this type of issues, the change is marked in bold, please check it again

4. Label of the ratios issue.

We miss recommended value and recommendation in P02E06F29

• The Recommended value should be "MEASURED"

• The Recommendation should be "Consider installing measurement equipments in all the main parameters that affect the energy efficiency from the heater equipment, such as energy consumption and water flow"

[WINGSTeam]

make a mistake in this type of issues, the change is marked in bold, please check it again

4. Label of the ratios issue. We miss recommended value and recommendation in P02E06F29

The Recommended value should be "MEASURED"

The Recommendation should be "Consider installing measurement equipments in all the main parameters that affect the energy efficiency from the heater equipment, such as energy consumption and water flow"

Done.

[WINGSTeam]

@AaronITCL The improvements work just fine for us. So, could you send us your user account (username, password) in order to check if there is any problem?

[AaronITCL]

Ratio´s calculations

1. Missing heater efficiency ratio

Still working wrongly

[WINGSTeam]

Still working wrongly

It works fine now. You can check it as well.