search

Equipment-and-Tool-Institute / j1939-84

J1939-84 implementation for etools.org
MIT License
7 stars 6 forks source link

V. 3.3.0 False Failure in Test 6.10 Time with MIL On > 0 #1364

Open ericthomasswenson opened 5 days ago

ericthomasswenson commented 5 days ago

V. 3.3.0 False Failure in Test 6.10

Time with MIL On > 0 is expected with Mil On DTC count > 0 in Test 6.8

Run with 1 two trip Fault A and 1 one trip Fault B

Start Test 6.8 - DM29: Regulated DTC counts 10:03:24.5500 Destination Specific DM29 Request to Engine #1 (0) 10:03:24.5519 18EA00F9 [3] 00 9E 00 (TX) 10:03:24.5541 189EF900 [8] [00 00 01 00 01 FF FF FF DM29 from Engine #1 (0): Emission-Related Pending DTC Count 0 All Pending DTC Count 0 Emission-Related MIL-On DTC Count 1 Emission-Related Previously MIL-On DTC Count 0 Emission-Related Permanent DTC Count 1

End Test 6.8 - DM29: Regulated DTC counts

Start Test 6.9 - DM31: DTC to lamp association 10:03:24.5594 Destination Specific DM31 Request to Engine #1 (0) 10:03:24.5604 18EA00F9 [3] 00 A3 00 (TX) 10:03:24.5625 18E8FF00 [8] 01 FF FF FF F9 00 A3 00 Acknowledgment from Engine #1 (0): Response: NACK, Group Function: 255, Address Acknowledged: 249, PGN Requested: 41728

End Test 6.9 - DM31: DTC to lamp association

Start Test 6.10 - DM21: Diagnostic readiness 2 10:03:24.5657 Destination Specific DM21 Request to Engine #1 (0) 10:03:24.5674 18EA00F9 [3] 00 C1 00 (TX) 10:03:24.5745 18C1F900 [8] [00 00 00 00 01 00 02 00 DM21 from Engine #1 (0): [ Distance Traveled While MIL is Activated: 0 km (0 mi) Time Run by Engine While MIL is Activated: 1 minutes Distance Since DTCs Cleared: 0 km (0 mi) Time Since DTCs Cleared: 2 minutes ] FAIL: 6.6.10.2.b - Engine #1 (0) reported with MIL on > 0 minutes, and the OBD System did not report a MIL on DTC count > 0 in its DM29 response.

End Test 6.10 - DM21: Diagnostic readiness 2