search

Ernillew / wl500g

Automatically exported from code.google.com/p/wl500g
0 stars 0 forks source link

1.9.2.7-rtn-r3300 can't boot up #259

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?

1. Try upgrading via web from 1.9.2.7-rtn-r2972 to 1.9.2.7-rtn-r3300.

What is the expected output? What do you see instead?

Expected firmware update and reboot after 3—5 minutes.

Actually:

1. Got "please wait" message.
2. wifi indicator turned off after ~1 minute.
3. Power indicator is on, one of lan ports is on and blinking.
4. Turned off power after 10 minutes of waiting.
5. Turned power on again. Got the same power indicator is on, one of lan ports 
is on and blinking.
6. Can't ping router.
7. Tried upgrading to 1.9.2.7-rtn-r3300 using tftp. Got the same state as in #4 
and #5.
8. Tried downgrading to 1.9.2.7-rtn-r2972 using tftp. Got fully functional 
device after power off - power on.

Original issue reported on code.google.com by alexander.makarow on 27 Sep 2011 at 7:44

GoogleCodeExporter commented 9 years ago 
First of all, you didn't provide your router model.

In case of you load any external modules at post-boot (or any other startup 
script), don't forget to update it.

P.S. It is unreproducible on WL500gPV1, RT-N16

Original comment by lly.dev on 28 Sep 2011 at 6:28

GoogleCodeExporter commented 9 years ago 
Sorry, it's WL500gPV1.

You mean I need to update flashfs configs prior to updating to 3300? What 
should I change there? Any reference?

Original comment by alexander.makarow on 28 Sep 2011 at 1:11

GoogleCodeExporter commented 9 years ago 
No, I mean that custom startup scripts can cause router not to boot properly. 
My guess - old/incompatible kernel modules. But I can be wrong.

I have only one similar report from WL700g owner - boot stuck at startup 
procedures in "rc", while kernel loads okay.

Original comment by lly.dev on 28 Sep 2011 at 1:40

GoogleCodeExporter commented 9 years ago 
That can be the case. When I've configured it for the first time it was Oleg's 
firmware and I've used some old tutorials to enable SSH etc. I'm not that good 
with unix to find what's wrong myself in a reasonable amount of time so will 
stay at 2972 for now.

Thanks for your help.

Original comment by alexander.makarow on 28 Sep 2011 at 2:16

GoogleCodeExporter commented 9 years ago 
If you will have time, please check night builds r3276 & r3284:
http://asus.vectormm.net/rtn/3276/wl/
http://asus.vectormm.net/rtn/3284/wl/

If first one(r3276) works but later one(r3284) not, than we have problem with 
nfs. It also complained in wl500g.info forum by one WL700g customer.

Original comment by lly.dev on 1 Oct 2011 at 3:40

GoogleCodeExporter commented 9 years ago 
OK, will check these builds next week.

Original comment by alexander.makarow on 1 Oct 2011 at 9:45

GoogleCodeExporter commented 9 years ago 
We have three similar bugreports. On results of preliminary investigation, it 
is a bug in new uClibc ld.so code

Original comment by lly.dev on 5 Oct 2011 at 6:44

GoogleCodeExporter commented 9 years ago 
Four ;-)

Original comment by dmg...@gmail.com on 7 Oct 2011 at 5:56

GoogleCodeExporter commented 9 years ago 
Sorry, I have a trip currently and can't check these nigtly builds. At least 
before Monday.

@dmg, it seems you have the same problem. Can you try firmwares from 
http://code.google.com/p/wl500g/issues/detail?id=259#c5 ?

Original comment by alexander.makarow on 7 Oct 2011 at 6:42

GoogleCodeExporter commented 9 years ago 
dmg244: Always provide your router model!

Behind this point, we have problem on WL500gPV1, WL700gE, WL500W.

Original comment by lly.dev on 9 Oct 2011 at 6:43

GoogleCodeExporter commented 9 years ago 
Please try http://wl500g.googlecode.com/files/WL500gp-1.9.2.7-rtn-r3415M.trx

Original comment by lly.dev on 9 Oct 2011 at 6:57

GoogleCodeExporter commented 9 years ago 
Any news?

Original comment by lly.dev on 16 Oct 2011 at 7:13

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
Why you add useless comments without reading the issue? It is bugtracker, not 
LJ or forum??!

Original comment by lly.dev on 16 Oct 2011 at 10:03

GoogleCodeExporter commented 9 years ago 
Fixed in toolchain r3447

Original comment by lly.dev on 20 Oct 2011 at 7:57

GoogleCodeExporter commented 9 years ago 
Thanks. Installed just fine.

Original comment by alexander.makarow on 3 Nov 2011 at 11:18

GoogleCodeExporter commented 9 years ago

Original comment by lly.dev on 3 Nov 2011 at 11:42