Printer HP1010 problem

[GoogleCodeExporter]

What steps will reproduce the problem?
1.reboot router
2.sorry my English
3.

What is the expected output? What do you see instead?
manually connecting or disconnecting the printer address increases:
kernel: usb 1-2.4: new full speed USB device using ehci_hcd and address 8
then there is this:
kernel: drivers/hid/usbhid/hid-core.c: control queue full

What version of the product are you using?
Firmware RT-N16-1.9.2.7-rtn-r3497

Please provide any additional information below.
connection:
[RT-N16] > [USB HUB] > [printer HP1010]

Original issue reported on code.google.com by sa...@karneval.cz on 9 Nov 2011 at 9:36

[GoogleCodeExporter]

First of all, you hide information about other devices connected to usb hub. It 
is unacceptable in case of you want to get help.

Second, seems to be your usb hub buggy or running out of power. Problem come 
from other unknown usb device, probably UPS. You can google similar bugreports, 
for example: http://www.spinics.net/lists/linux-usb/msg27318.html

Original comment by lly.dev on 9 Nov 2011 at 10:08

[GoogleCodeExporter]

Other devices connected to the USB HUB: USB HDD, UPS and USB/RS232, it's all 
right. It does this only when connected printer.

Original comment by sa...@karneval.cz on 9 Nov 2011 at 11:22

[GoogleCodeExporter]

1) Provide full syslog.log

2) Router is not a PC, and there might be not enough power on USB ports. 
Decrease number of consumers or add external usb power supply.

3) Try to read wl500g.info forum or similar resources to understand routers 
real capabilities. Never trust commercial ads from manufacturers.

Original comment by lly.dev on 9 Nov 2011 at 11:42

[GoogleCodeExporter]

The USB hub I connected an external power supply. A printer I connected and 
disconnected. Message "kernel: drivers / hid / usbhid / hid-core.c: control 
queue full" is not yet appeared.

Original comment by sa...@karneval.cz on 9 Nov 2011 at 12:45

Attachments:

• log.txt

[GoogleCodeExporter]

Once more again - it is cutted syslog.log. Sorry, we are unable to provide 
personal support.

Moreover, I see following messages

 kernel: usb 1-2.4: device descriptor read/64, error -145

it assumes bad usb cable or other hardware problem.

Original comment by lly.dev on 9 Nov 2011 at 1:04

• Changed state: Invalid

[GoogleCodeExporter]

OK. Problem no longer do not care. Here is the entire log.

Dne 9.11.2011 14:04, wl500g@googlecode.com napsal(a):

Original comment by sa...@karneval.cz on 9 Nov 2011 at 10:37

[GoogleCodeExporter]

log

Original comment by sa...@karneval.cz on 9 Nov 2011 at 10:44

Attachments:

• syslog.log.3.gz

[GoogleCodeExporter]

Just for clarification - FULL syslog must include initial usb devices 
recognition to determine their type, speed, etc. In case of you(or someone 
else) install logrotate or any other software, he(she) must understand what he 
done.

Original comment by lly.dev on 10 Nov 2011 at 6:23