search

Esri / Trek2There

Trek2There™
Apache License 2.0
10 stars 5 forks source link

Arrived too early #59

Closed Matronek closed 7 years ago

Matronek commented 7 years ago

I had a chance to use Trek2There with a Leica Zeno 20. The Zeno 20 has centimeter accuracy so I was going to try using Trek2There to find buried valve. If I got within 20ft it would say I arrived. Is there a way to make this app never arrive? The Zeno 20 has a program for staking out a point and the direction and distance are constantly changing as you get closer to the object. Trek2There could be used for staking to a point if the arrived message doesn't come up. I think a reset button would work better for this.

defiantgoat commented 7 years ago

@Matronek Thanks for your feedback. This is certainly something we will be looking at as we enhance the application.

defiantgoat commented 7 years ago

Disabled arrival logic by speed and distance. For this version, the user should never receive the arrival message. If a request is made to re-implement arrival logic and arrival message, the logic can be finessed and re-introduced in a later version.

marikavertzonis commented 7 years ago

tested with 2.0.287 to 2.0.301 on

and i see that the arrival message never appears. this is quite fine - as I approach my destination the distance does get small(3-5m) and then as i move around and away from it, it grows. This is good. I can successfully click end to go back to my referring app.