Pad Mounted Three Phase Regulator

jalsup commented 5 years ago

Mike has example near his house that he will model.

MichaelZeiler commented 5 years ago

This is the instance on my home from town. On the source side of the three pad mounted regulators is a PMH-11 switchgear

MichaelZeiler commented 5 years ago

Wiring diagram of bypass switch inside pad mounted regulator cabinet. @jalsup, this shows two disconnect switches around bypass switch. Do we model all this?

PM regulator and bypass

MichaelZeiler commented 5 years ago

Pad Mounted Voltage Regulator Bank-01

This is the case of three nearby single phase pad mounted regulators as shown in the photo above. There are three issues to discuss here:

Should we model UG lines as three underground lines within a trench (container)? Or with line ends on a 3 phase UG line with connectivity associations to the elbows?
The wiring diagram shows three connections to the two disconnect switches. Will normal switches work for this?
I modeled the two types of switches as 'Underground Single Phase Disconnect' and 'Underground Single Phase Load Break'. But they really should be 'Pad Mounted Single Phase Disconnect' and 'Pad Mounted Single Phase Load Break', but those types do not yet exist in our AG/AT list.

jalsup commented 5 years ago

this looks good to me. Can you upload the file?

MichaelZeiler commented 5 years ago

It should be uploaded already. It was part of a pull request on April 23rd.

jalsup commented 5 years ago

@MichaelZeiler I found an issue with the diagram. The Ar in the Table of Contents should be Lb Can you correct this for me?

MichaelZeiler commented 5 years ago

Fixed. PDF at https://www.dropbox.com/s/vm5kiceghbh6pqd/Pad%20Mounted%20Voltage%20Regulator%20Bank%20detail%20UN.pdf?dl=0

Esri / utility-network-modeling

Pad Mounted Three Phase Regulator #98