search

EvanMulawski / FanControl.CorsairLink

The unofficial CorsairLink plugin for Fan Control. Adds support for Corsair controllers, liquid coolers, and power supplies. An alternative to iCUE.
143 stars 10 forks source link

iCUE H100i RGB PRO XT AIO RGB Pump Head getting color defects with 1.6.0 #174

Open Zeromoon95 opened 4 months ago

Zeromoon95 commented 4 months ago

I have starting getting rgb Issues ever since installing the 1.6.0.

It's the one when the blue tint shows up eventually after displaying full color for a while. This is what the issue I spotted: IMG_20240602_234306_099

EvanMulawski commented 4 months ago

Hi @Zeromoon95, is the blue always in the same location? Also, do you observe any flickering?

Zeromoon95 commented 4 months ago

I think it's the same location. Doesn't seem to flick.

EvanMulawski commented 4 months ago

@Zeromoon95 How much time passes before the blue appears?

Zeromoon95 commented 3 months ago

Like between15 mins to 30?

ChapvQ commented 3 months ago

same here

RyuConnor commented 1 month ago

I believe I also have this defect, but on the Corsair H115i RGB Pro XT.

I set the environment variables that defined the color to 0,0,0. This works for about 24 to 48 hours, then all the sudden, the pump area lights up with a blue color.

I thought maybe I needed to also set the intensity environment variable. So I placed that variable at 0.

Same situation. After 24 hours to 48 hours, the light turns back on with a blue color.

There are ACPI S3 sessions happening during this time frame, but it resumes fine. This never happens on resume. It hasppens during active use after enough time has elapsed.

If there's a logging fucntion that would catch when this happens, I'm more than happy to turn that on.