search

ExpertSDR3 / ExpertSDR3-BUG-TRACKER

19 stars 13 forks source link

ExpertSDR3 1.0.2 beta - SunSDR2DX: SSB Monitor isn't transferred to sound card #541

Open HA1AH opened 1 year ago

HA1AH commented 1 year ago

OS: Windows 10 Radio:EED06202100490 Headset connected directly to the SunSDR2DX through MIC1 and PHONES sockets.

I use the "Enable/Disable Sound Card" button in the status bar of the software. With right mouse click I've set up a virtual cable to send audio to an external recorder software.

On CW everything is OK, both the received and the sent signals can be recorded for both RX1 and RX2. It works as expected: what I hear in my headphone connected to the PHONES socket of the radio, I can also record.

BUT: on SSB I can record only the received signals. The sent voice audio is not transferred to the recorder software. It's indifferent if I switch on or off the "Monitor" at the top of the main window. It switches on/off the SSB monitor audio only for the directly connected headset. It's also indifferent if the sent audio comes from the microphone or fromN1MM through a virtual cable, none of them is transferred to the virtual cable.

(I know the possibility of "RX1 Sound Card" and "RX2 Sound Card" in the main Settings panel, but this has also a bug: #542)

Expected behavior: what I hear in the directly connected headphone should be one to one transferred to the audio device configured as target device in the bottom status bar row of the main window.

HA1AH commented 1 month ago

Would it be possible to fix this issue? I'd really need it.