SV1RXI
commented
1 year ago even when i have the rx2 all going well when i change freg on rx1 ...i am on 7170 and go to 7171 then no problem .My pc is 12th gen intel cpu ,16gb memory ,cpu usage according to the expert 3 is about 1 to 3 or 4% .But randomly the expert3 is freeze
After install the 3 and make audio tests the programm freeze ,after i open it again continue the audio tests .After some minutes i click on rx2 and transmit on the same band ,the swr is over 11 ,no modulation out.I desengage rx2 ,Go back to RX1 and transmit again hi swr and no modulation out ( i hear my selF all this time on web sdr ,that's why know about no modulation out ). I can only transmit when i have the rx2 when i move and change the freg then i hear a click sound from the unit and i can transmit without any problem .I desenagage the rx2 and again the same problem in rx1 ,when i change the freg all ok no problem but every time change freg i hear a click sound from the uint inside .In expert 2 i have not this problems i try it after the problems in expert 3 but every time i go back to 3 some problems show like randomly freeze , a distortion coming out from headphones not from speakers and one time the smeter was at +60 and the stations was not strong and nedd to close and open again the programm or press the ptt but that is for a few minutes fix .My pc is 16gb memory and 12th gen intel 12600 .SUNSDR PRO SN-EED05131900613 FIRMWARE 86.8 PCB REV 4