ESDR3 V0.10.0 Alpha
Win-10 Home 64
MB-1
Audobe Audition 1.5
WIN -10 HOME 64
transceiver MB-1
Dear PROGRAMMER!
You are welcome!! SET THE CORRECT MIC meret READINGS, the TX Panorama readings (the cell pitch
in the PANORAMA I TOOK 5dB) WITH a SINGLE-TONE EXTERNAL GENERATOR connected to the MIC Pc input, MIC-1, MIC-2 must match!! And today they match ONLY WITH the INPUT 0dB!!! And that's about it !!! the
Mic PC gain control is in the 0 dB "ALWAYS" position. All processing modules "PROC" are "OFF"
input 0 dB MICLEVEL shows 0 dB
input minus 5 dB -MIC LEVEL shows minus 2.4 dB input minus
10 dB- MIC LEVEL shows minus 4.9 dB
input minus 15 dB - MIC LEVEL shows negative 7.4 dB
input minus 20 dB -MIC LEVEL shows minus -9.9 dB
input minus 25 dB - MIC LEVEL shows minus 12.4 dB
input minus 30 dB - MIC LEVEL shows minus 14.9dB
input minus 35dB MIC LEVEL shows minus 17.4dB
I beg you very much, PLEASE DO NOT FORGET about the correctness of the "Boost" indicator readings in the "BYPASS" mode at the levels of minus 12dB, minus 24dB, minus 36dB, minus 48dB, minus 60dB!!! The 0dB level of the "Boost" indicator completely matches the MIC meret in the readings, while the position of the "Boost" gain control is at 0dB "ALWAYS"!!!
Note that when the TWO-TONE GENERATOR is "TURNED ON" (the ESDR3 program itself. then the Mic meter level is minus 3 dB, and this is not correct, the two tone generators should add up to the amplitude and subtract by level!!
Namely, the panorama of the transmitter should have a reading of minus 6dB! And the MIC meter indicator, the ESDR3 program when the generator of two tones of the PROGRAMESDR3 itself is running. should show 0dB!!! I applied two tones from an external oscillator, the Mic meter 0 indicator shows! But the panorama "LIES"
ESDR3 V0.10.0 Alpha Win-10 Home 64 MB-1 Audobe Audition 1.5
WIN -10 HOME 64 transceiver MB-1 Dear PROGRAMMER! You are welcome!! SET THE CORRECT MIC meret READINGS, the TX Panorama readings (the cell pitch in the PANORAMA I TOOK 5dB) WITH a SINGLE-TONE EXTERNAL GENERATOR connected to the MIC Pc input, MIC-1, MIC-2 must match!! And today they match ONLY WITH the INPUT 0dB!!! And that's about it !!! the Mic PC gain control is in the 0 dB "ALWAYS" position. All processing modules "PROC" are "OFF" input 0 dB MICLEVEL shows 0 dB input minus 5 dB -MIC LEVEL shows minus 2.4 dB input minus 10 dB- MIC LEVEL shows minus 4.9 dB input minus 15 dB - MIC LEVEL shows negative 7.4 dB input minus 20 dB -MIC LEVEL shows minus -9.9 dB input minus 25 dB - MIC LEVEL shows minus 12.4 dB input minus 30 dB - MIC LEVEL shows minus 14.9dB input minus 35dB MIC LEVEL shows minus 17.4dB I beg you very much, PLEASE DO NOT FORGET about the correctness of the "Boost" indicator readings in the "BYPASS" mode at the levels of minus 12dB, minus 24dB, minus 36dB, minus 48dB, minus 60dB!!! The 0dB level of the "Boost" indicator completely matches the MIC meret in the readings, while the position of the "Boost" gain control is at 0dB "ALWAYS"!!! Note that when the TWO-TONE GENERATOR is "TURNED ON" (the ESDR3 program itself. then the Mic meter level is minus 3 dB, and this is not correct, the two tone generators should add up to the amplitude and subtract by level!! Namely, the panorama of the transmitter should have a reading of minus 6dB! And the MIC meter indicator, the ESDR3 program when the generator of two tones of the PROGRAMESDR3 itself is running. should show 0dB!!! I applied two tones from an external oscillator, the Mic meter 0 indicator shows! But the panorama "LIES"