3.3.0 100Hz Full only 14 channels

ExpressLRS / ExpressLRS

ESP32/ESP8285-based High-Performance Radio Link for RC applications

GNU General Public License v3.0

3.6k stars 901 forks source link

3.3.0 100Hz Full only 14 channels #2315

Closed jasc76 closed 1 year ago

jasc76 commented 1 year ago

Current Behavior

I only got 14 channels.

Steps to Reproduce

Hyppymodel 2.4 EP Dual flash from 3.2.1 to 3.3.0 channels dont work flashed back to 3.2.1 channels work again

Possible Solution (Not obligatory)

Details

100Hz Full in 16/2 mode

Your Environment

TX hardware: Jumper AION 2.4
RX hardware: Happymodel EP Dual
Handset model: X20s
OpenTX version (including nightly number): Ethos 1.4.8
ExpressLRS version (TX & RX MUST MATCH): 3.3.0
Packet Rate: 100hz
Telemetry Ratio: 1:4
user_defines:

pkendall64 commented 1 year ago

If this is with CRSF output then that is correct as the last 2 channels of CRSF are RSSI dBm and LQ. I'm not sure what you are actually reporting as the bug here! Is that you only get 14 channel output in 3.3.0 or no channels at all?

jasc76 commented 1 year ago

I only get 14 I didn’t change anything, I just updated to 3.3 Yes output is crsf. But thats the same on 3.2 So how do I have to set it on 3.3 ?

pkendall64 commented 1 year ago

I only get 14 I didn’t change anything, I just updated to 3.3 Yes output is crsf. But thats the same on 3.2 So how do I have to set it on 3.3 ?

CRSF output has always only ever had 14 channels from the transmitter and the channel 15 and 16 are RSSI dBm and LQ generated on the receiver side.