search

F1ATB / Remote-SDR

Remote control of 2 Software Design Radio. Receiver and transmitter. Based on Adalm-Pluto SDR or RTL-SDR or Hack RF SDR or SDRplay and signal processing using GNU Radio on Raspberry PI. GUI on a web browser.
https://f1atb.fr
GNU General Public License v3.0
142 stars 23 forks source link

Where is Look for updates #25

Closed Fihl closed 1 year ago

Fihl commented 2 years ago

I just upgraded to 5.0, and see that front page of web page says:

Version 5.02 is installed directly by clicking on "Look for updates" in the "Tools" page. I have Tools next to Settings, bottom right. But I cannot locate any Upgrade possibility (github also gives this instruction)

Problem I just got, upgraded from v4, burning a new SD from image to my RPi400

I do have RX sound I have cleaned Chrome local storage

Thanks for nice system 73 de OZ1AAB

Fihl commented 2 years ago

PS: I am using Adalm Pluto

F1ATB commented 2 years ago

First you have to go on the Settings page. Just below the top, set the Access Key to 1234

Then you go on the Tools page and on the line 7, you have the look for updates; Click it 2 times.

Explanations and screen pictures are given here; https://f1atb.fr/index.php/2022/05/21/remote-sdr-v5-raspberry-4b-or-orange-pi-image-installation/ 73 F1ATB

Fihl commented 2 years ago

Thanks "Click 2 times" :-) My Adalm Pluto RX "man. correction" needs to be around plus 28000, so when changed i settings to be 25000..32000, it now stays as I need TX is now possible to select, as 1234 is entered i Settings. I have not been online yet though. Last fight is that Chrome on pc gives me "continue to unsecure site", while Chrome on Mac does not even though I have activated chrome://flags/#allow-insecure-localhost Strange.. 73 Christen

F1ATB commented 2 years ago

Christen

Deactivate in chrome " allow-insecure-localhost " In version 5, i have put an https access with a self-signed certificate. You don't need to put an exception as in version 4.

Regards F1ATB

Le sam. 3 sept. 2022 à 22:07, Christen Fihl @.***> a écrit :

Thanks "Click 2 times" :-) My Adalm Pluto RX "man. correction" needs to be around plus 28000, so when changed i settings to be 25000..32000, it now stays as I need TX is now possible to select, as 1234 is entered i Settings. I have not been online yet though. Last fight is that Chrome on pc gives me "continue to unsecure site", while Chrome on Mac does not even though I have activated chrome://flags/#allow-insecure-localhost Strange.. 73 Christen

— Reply to this email directly, view it on GitHub https://github.com/F1ATB/Remote-SDR/issues/25#issuecomment-1236191672, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACN7K5P2RX6NEFT3ZWRT6HDV4OVZLANCNFSM6AAAAAAQD23GTU . You are receiving this because you commented.Message ID: @.***>

-- André Buhart F1ATB https://f1atb.fr https://sea-seek.com

F1ATB commented 2 years ago

you need to enter the access key '1234' in the top of the setting page.

Regards 73 F1ATB

Le sam. 3 sept. 2022 à 12:15, Christen Fihl @.***> a écrit :

I just upgraded to 5.0, and see that front page of web page says:

Version 5.02 is installed directly by clicking on "Look for updates" in the "Tools" page. I have Tools next to Settings, bottom right. But I cannot locate any Upgrade possibility (github also gives this instruction)

Problem I just got, upgraded from v4, burning a new SD from image to my RPi400

  • Manual correct always start on -165000Hz
  • I cannot select "QO-100 Up" on TX page. It just jumps back to 70cm

I do have RX sound I have cleaned Chrome local storage

Thanks for nice system 73 de OZ1AAB

— Reply to this email directly, view it on GitHub https://github.com/F1ATB/Remote-SDR/issues/25, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACN7K5N4T52U4TO2USHF7DLV4MQMRANCNFSM6AAAAAAQD23GTU . You are receiving this because you are subscribed to this thread.Message ID: @.***>

-- André Buhart F1ATB https://f1atb.fr https://sea-seek.com

Fihl commented 2 years ago

I got the settings to work, using 1234 But only on Chrome on Windows PC

Deactivate in chrome " allow-insecure-localhost " On both my macs (M1 and an old MacMini), I cannot get access to the frontpage. Sometimes I get 2 seconds of webpage, and then it jumps into "Privacy warnings" without a button saying "proceed to unsafe page"

Message says: 172.26.1.118 normally uses encryption to protect your information. When Chrome tried to connect to 172.26.1.118 this time, the website sent back unusual and incorrect credentials. This may happen when an attacker is trying to pretend to be 172.26.1.118 or a Wi-Fi sign-in screen has interrupted the connection. Your information is still secure because Chrome stopped the connection before any data was exchanged.

You cannot visit 172.26.1.118 at the moment because the website sent scrambled credentials that Chrome cannot process. Network errors and attacks are usually temporary, so this page will probably work later.

I have not been much on this problem, as the PC Chrome does work Christen

F1ATB commented 2 years ago

If you do not succeed to go on the Tools page, Rest Manually the Local Browser. Ctrl+Shift+I when you are on the page. In Local Storage, clean everything belonging to Remote SDR.

If you do not succeed, I can take the control of your PC and investigate.

Regards @.***

Le mar. 11 oct. 2022 à 10:36, Christen Fihl @.***> a écrit :

I got the settings to work, using 1234 But only on Chrome on Windows PC

Deactivate in chrome " allow-insecure-localhost " On both my macs (M1 and an old MacMini), I cannot get access to the frontpage. Sometimes I get 2 seconds of webpage, and then it jumps into "Privacy warnings" without a button saying "proceed to unsafe page"

Message says: 172.26.1.118 normally uses encryption to protect your information. When Chrome tried to connect to 172.26.1.118 this time, the website sent back unusual and incorrect credentials. This may happen when an attacker is trying to pretend to be 172.26.1.118 or a Wi-Fi sign-in screen has interrupted the connection. Your information is still secure because Chrome stopped the connection before any data was exchanged.

You cannot visit 172.26.1.118 at the moment because the website sent scrambled credentials that Chrome cannot process. Network errors and attacks are usually temporary, so this page will probably work later.

I have not been much on this problem, as the PC Chrome does work Christen

— Reply to this email directly, view it on GitHub https://github.com/F1ATB/Remote-SDR/issues/25#issuecomment-1274314111, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACN7K5P62RWCN5ALX6LNEI3WCURKBANCNFSM6AAAAAAQD23GTU . You are receiving this because you commented.Message ID: @.***>

-- André Buhart F1ATB https://f1atb.fr https://sea-seek.com

Fihl commented 2 years ago

I cannot clear local storage, as the page are not there (as problem page are shown). Then I change IP on RPi, and then storage must have gone :-) No test-features are enabled. I created another user on mac and then got a clean chrome. When I start on http://IP (not HTTPS), then I see page shortly, but gets thrown into HTTPS within 2 seconds, and then the complain.

Nothing helps. Must be some certificate problem. You can look into my Mac for sure. Catch me on Christen@Fihl.net or OZ1AAB@Fihl.net I am away 2:30-3:00

F1ATB commented 2 years ago

You must accept the certificate. It's a self-certified certificate create by me. It's free. You accept validate as explained here https://f1atb.fr/index.php/2022/05/21/remote-sdr-v5-raspberry-4b-or-orange-pi-image-installation/

and you will switch to https which is mandatory to access the microphone on Chrome.

Le mar. 11 oct. 2022 à 13:19, Christen Fihl @.***> a écrit :

I cannot clear local storage, as the page are not there (as problem page are shown). Then I change IP on RPi, and then storage must have gone :-) No test-features are enabled. I created another user on mac and then got a clean chrome. When I start on http://IP (not HTTPS), then I see page shortly, but gets thrown into HTTPS within 2 seconds, and then the complain.

Nothing helps. Must be some certificate problem. You can look into my Mac for sure. Catch me on @. or @. I am away 2:30-3:00

— Reply to this email directly, view it on GitHub https://github.com/F1ATB/Remote-SDR/issues/25#issuecomment-1274525490, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACN7K5IICNUD5VYJHLL4UFDWCVELHANCNFSM6AAAAAAQD23GTU . You are receiving this because you commented.Message ID: @.***>

-- André Buhart F1ATB https://f1atb.fr https://sea-seek.com

Fihl commented 2 years ago

I must give up on Chrome on Mac

Safari and Firefox can browse to http://remsdr-rpi4.local/ Both asks "Are you damn sure", but lets me continue to site, and can listen.

In Chrome I have tried a lot, and "Insecure content" set to Allow on this page: chrome://settings/content/siteDetails?site=https%3A%2F%2Fremsdr-rpi4.local

But I never gets a button saying "Continue to site anyway". Sorry

Fihl commented 1 year ago

I am back, on QO, and started over. Got a V5.0 on RPi4. It works on pc and now also (again) on Mac too Upgraded it to V5.08, and it also works perfekt. I put the previous SD card back (V5.06 I guess, maybe V5.02). No luck

Strange though, but I am now on the air, on V5.08

Case closed, with success, thanks 73