F1ATB / Remote-SDR

Remote control of 2 Software Design Radio. Receiver and transmitter. Based on Adalm-Pluto SDR or RTL-SDR or Hack RF SDR or SDRplay and signal processing using GNU Radio on Raspberry PI. GUI on a web browser.
https://f1atb.fr
GNU General Public License v3.0
144 stars 23 forks source link

CAT issue #26

Open AndyBlm opened 2 years ago

AndyBlm commented 2 years ago

Hi Andre! I leave a message on you site but today my post disappered Nevetheless, i have installed rpI4 image and updated to 5.07 and still have issue with CAT GPREDICT and setting FREQA via Omnirig Client works fine, however OmniRig did`t retrieving freq from RemSDR - field FREQ in client apps always empty and in outgoing tab of VSPE i can see only IF5 or IF7 and nothing else What is wrong ? pls help

F1ATB commented 2 years ago

I answered this morning. https://f1atb.fr/index.php/2022/01/18/omnirig-remote-sdr-2/

Le lun. 17 oct. 2022 à 09:26, AndyBlm @.***> a écrit :

Hi Andre! I leave a message on you site but today my post disappered Nevetheless, i have installed rpI4 image and updated to 5.07 and still have issue with CAT GPREDICT and setting FREQA via Omnirig Client works fine, however OmniRig did`t retrieving freq from RemSDR - field FREQ in client apps always empty and in outgoing tab of VSPE i can see only IF5 or IF7 and nothing else What is wrong ? pls help

— Reply to this email directly, view it on GitHub https://github.com/F1ATB/Remote-SDR/issues/26, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACN7K5KWRWH3AGBDSXLCRMDWDT5T3ANCNFSM6AAAAAARGYT5AQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>

-- André Buhart F1ATB https://f1atb.fr https://sea-seek.com

AndyBlm commented 2 years ago

1-2022-10-17 152206 Andre, thank you for reply, i attached a few screenshots and hope will be clear for you every time after start OmniRig client i see the new message in outgoing tab of VSPE: IF0 IF1 etc but no frequency are returned . BTW with RTS parameter in Omnirig, no differents finally between Low and Handshake - only visible green indicator in VSPE apps.

2022-10-17 150856 2022-10-17 150800 2022-10-17 150703 2022-10-17 150628

F1ATB commented 2 years ago

Andy

Which software (YONIQ-SSTV, WSJT-X...) is connected to Omnirig? It must provides the frequency. André @.***

Le lun. 17 oct. 2022 à 14:14, AndyBlm @.***> a écrit :

Andre, thank you for reply, i attached a few screenshots and hope will be clear for you every time after start OmniRig client i see the new message in outgoing tab of VSPE: IF0 IF1 etc but no frequency are returned [image: 2022-10-17 151222] https://user-images.githubusercontent.com/115976830/196174434-b419b118-b311-464a-8259-edebfb280dec.jpg [image: 2022-10-17 150856] https://user-images.githubusercontent.com/115976830/196174443-548d0427-5fad-45f1-8b1d-433f27fccf97.jpg [image: 2022-10-17 150800] https://user-images.githubusercontent.com/115976830/196174445-25957a29-4594-4d16-9cb7-c792719f4aa8.jpg [image: 2022-10-17 150703] https://user-images.githubusercontent.com/115976830/196174446-a093ea77-0293-4b24-8b5d-48c20875e4a3.jpg [image: 2022-10-17 150628] https://user-images.githubusercontent.com/115976830/196174448-02eeb99b-cccc-4cd5-b699-c1f0445d4aa0.jpg

— Reply to this email directly, view it on GitHub https://github.com/F1ATB/Remote-SDR/issues/26#issuecomment-1280763737, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACN7K5NICMEEB63BOCCMHTLWDU7MBANCNFSM6AAAAAARGYT5AQ . You are receiving this because you commented.Message ID: @.***>

-- André Buhart F1ATB https://f1atb.fr https://sea-seek.com

AndyBlm commented 2 years ago

Andre, for the time being i trying to use Log only without SSTV or WSJT apps , i hope receiving Freq should return to Log or ? With setting freq via field FREQA on OmniRig Client i can see (as example) FA000435600000 command in VSPE incoming messages however in outgoing no anything different in compare with my pics in the post above.

F1ATB commented 2 years ago

You need to transmit continuously the frequency. Otherwise, there is a timeout and you are disconnected.

André

Le lun. 17 oct. 2022 à 15:49, AndyBlm @.***> a écrit :

Andre, for the time being i trying to use Log only without SSTV or WSJT apps , i hope receiving Freq should return to Log or ? With setting freq via field FREQA on OmniRig Client i can see FA000435600000 command in VSPE incoming messages however in outgoing no anything different in compare with my pics in the post above.

— Reply to this email directly, view it on GitHub https://github.com/F1ATB/Remote-SDR/issues/26#issuecomment-1280892003, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACN7K5PHIIQS3FH52I6LO6TWDVKM5ANCNFSM6AAAAAARGYT5AQ . You are receiving this because you commented.Message ID: @.***>

-- André Buhart F1ATB https://f1atb.fr https://sea-seek.com

AndyBlm commented 2 years ago

Can be a turnaround just to retrieve freq without continiously send send send? BTW in you article -Test with “Client.exe”- visible retrived freq in the tab FREQ what i can`t get retrieve freq