search

F6ITU / K_PA_Protec

LA2NI OpenHPSDR Power Amplifier Protection board- kicad port
0 stars 0 forks source link

K_PA_Protec #1

Open 2Ntthunter opened 2 weeks ago

2Ntthunter commented 2 weeks ago

hi can you help me? I am looking for a working file for the netion display. Do you hafe on

F6ITU commented 2 weeks ago

Dear OM All software files are stored on the G8NJJ's github, under the "Aries ATU" folder, subdirectory "Nextion files" https://github.com/laurencebarker/Aries-ATU/tree/master ... but this extension was developped for a "stand alone" ATU version that never saw the light I believe. The control board works perfectly without this display (as all graphical infos are displayed in the Thetis client interface)

you also should read "Aries ATU concept nano IoT 33 version- Nextion debug.docx in G8NJJ's Aries ATU folder (https://github.com/laurencebarker/Aries-ATU/tree/master/documentation). Thus to add Nextion's lib in the Aries ATU Arduino's sketch.

The Nextion display is totally dependant of the ATU board. If you intend to use LA2NI's Munin400 amplifier without the ATU, just use the control board "as is"

2Ntthunter commented 2 weeks ago

I actually want to build a munin 400 with the atu and install a hermes lite 2 in it

F6ITU commented 2 weeks ago

It may be possible to adapt the Hermeslite I/O board to this project, in order to emulate the "open collector" outputs of the OpenHPSDR SDR (orion/angelia/anvelina etc.)

You'll find attached the general schematic of the project by LA2NI and G8NJJ. For questions of compatibility and CAT command management between Thetis and all these boards, only Laurence G8NJJ can answer seriously. My work is limited to porting Kjell's work to Kicad, so that as many OMs as possible can have access to it... but alas, I don't master all the firmware aspects of the Aries ATU.

ATU_munin_zolotaref_schematic.pdf

2Ntthunter commented 2 weeks ago

works the ATU with the esp32 software i have found ?

F6ITU commented 2 weeks ago

Hi 2Ntthunter,can we continue this conversation via email? this github section is intended for bug-related talks and isn't very practical for providing "user manuals". My email address : marc.olanie@decision.fr VY 73' f6itu ps : yes, the ATU is powered by an Arduino IOT 33 using an ARM Cortex M0, and G8NJJ's code should be compiled/loaded in this device