Script for Programming Igloo FPGAs

FNAL-HCAL-Ph1Upgrade / gui-step1

A small gui for the first step in the QIE testing process

0 stars 1 forks source link

Script for Programming Igloo FPGAs #28

Closed caleb-james-smith closed 6 years ago

caleb-james-smith commented 6 years ago

Dedicated scripts for programming Igloo FPGAs.

scripts.py
programIgloos.py
uploadIgloo.sh

A smaller GUI used at CERN for reading QIE card info

Simple-Gui.py

caleb-james-smith commented 6 years ago

The scripts for programming Igloos have been tested. Right now Simple-Gui.py is deprecated. We can work on updating it.

caleb-james-smith commented 6 years ago

I have made Simple-Gui.py identical to User-Interface.py. It is now only a starting point if we want to make a simplified gui for future use that allows for reading card info but does not contain the tests that we will complete at FNAL.

caleb-james-smith commented 6 years ago

Now the pi ip addresses are set for two backplanes

pi6 for GUI and Bridge programming
pi7 for script and Igloo programming

caleb-james-smith commented 6 years ago

The multiplexing was fixed for jslots 23,24,25,26.

caleb-james-smith commented 6 years ago

Now the Windows PC can use the GUI (for reading info only, not for uploading results). The pi ip address is now explicit.