Closed itsme200 closed 9 months ago
vr2045
commented
1 year ago Looks like the FTDI EEPROM got blown away somehow so you're seeing this as a 'single rs232'. This should show up as a UPduino 3.0/3.1 so icestudio can recognize it. Please use the script here to reinitialize the EEPROM then unplug/replug the board. Should then get recognized by icestudio.
dee2dee3
commented
10 months ago im having a similar problem where i cant upload to my upduino because Icestudio cant seem to recognize it, would this solution work for me? if so how do I do it
cavearr
commented
9 months ago Hi !! yo fix the problem? i'll keep open the issue some more days awaiting for your response and if not i'm closing it.
The problem is more related to upduido than icestudio.
Reopen when you want if you encountered it closed.
vr2045
commented
9 months ago Hello, Please stop by the tinyVision.ai discord server so we can help you: https://discord.gg/3qbXujE Agreed, this is not an icestudio issue and should be closed.
On Mon, Feb 5, 2024 at 10:36 AM Carlos Venegas Arrabé < @.***> wrote:
Hi !! yo fix the problem? i'll keep open the issue some more days awaiting for your response and if not i'm closing it.
The problem is more related to upduido than icestudio.
Reopen when you want if you encountered it closed.
— Reply to this email directly, view it on GitHub https://github.com/FPGAwars/icestudio/issues/686#issuecomment-1927767462, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHDV6C5IWHAMQVPLC56E7UDYSERBVAVCNFSM6AAAAAAV7P4QW6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRXG43DONBWGI . You are receiving this because you commented.Message ID: @.***>
So i bought an upduino 3.1 for a school project. I installed Ice studio and selected the board. I checked that the version was 0.10.0 since only this one supports it. At first I was getting the ftdi_usb_get_strings failed: -4 (libusb_open() failed) error. after that I installed apio manually since that could of have been an issue. And after that the apio system --lsftdi outputed that one device was found and the name was single rs232. So that was sorted. I enabled the drivers and after trying to upload again it only outputed the Upduino 3.1 not connected error. I have tried multiple fixes but none of them worked. Any help would be apreciated.
