Two tests fail after installation

[fperrone2]

I have installed OpenMDAO correctly. After activating OpenMDAO e being in Fusedwind folder, I did the following:

C:\fusedwind> python setup.py install C:\fusedwind> plugin install

I then tried to run the tests one by one. The all succeed, except for

test_loadcaseIO.py test_plant_flow_asym.py

Do you have a clue why?

[fzahle]

Hi fperrone2, First of all you don't need to run both python setup.py install and plugin install. The latter essentially does what the first one does except it installs the code as a so-called develop egg so you can edit the source from where you checked out the code. To be sure that all is OK, best thing is probably to remove the fusedwind egg from <python install dir>/Lib/site-packages/fusedwind* and then rerun plugin install.

That said, I don't think the above should give rise to the errors you're getting. Are you running the develop branch or the 0.1.0 of FUSED-Wind? Also, FUSED-Wind currently only supports OpenMDAO v0.10.3.2, so please make sure you're not on either their dev branch or v0.12.0.

[fperrone2]

Well, I am using OpenMDAO v0.10.3.2 and FUSED-Wind v0.1.0. I also have a second question: could you please indicate all the Python packages required to correctly run FUSED-Wind? The list given on the webpage is definitively not complete, since in the very eary stages also other tests failed because of missing Python packages (like ipdb for example).

[fzahle]

the ipdb import shouldn't have been there, now removed. Which other packages did you need to install that wasn't listed as dependencies?

Could you please paste in the output of the error you're getting when running the tests?

[fperrone2]

If I remember right, I also needed ipython (which is not on the list) and one onether package, whose name I cannot currently recall. You said ipdb is "now" removed: you mean from the new dev version? Anyway I'm giving another try to the installation. I will report whether it went through or not.

[fperrone2]

So, after re-installing, test_loadcaseIO.py runs through (after commenting out "import ipdb"); however I still have issues with test_plant_flow_asym. The report is the following:

(openmdao-0.10.3.2) C:\Users\PerroneF\Desktop\fusedwind-0.1.0\src\fusedwind\test

python test_plant_flow_asym.py :0: FutureWarning: IPython widgets are experimental and may change in the future .

EE.E.E

ERROR: test_configure (main.test_AEPMultipleWindRoses)

Traceback (most recent call last): File "test_plant_flow_asym.py", line 59, in test_configure aep = AEPMultipleWindRoses() File "c:\users\perronef\desktop\fusedwind-0.1.0\src\fusedwind\interface.py", l ine 209, in init super(FUSEDAssembly, self).init() File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\assembly.py", line 175, in init set_as_top(self, first_only=True) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\assembly.py", line 71, in set_as_top cont.cpath_updated() File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\component.py", line 378, in cpath_updated self.configure() File "c:\users\perronef\desktop\fusedwind-0.1.0\src\fusedwind\plant_flow\asym. py", line 236, in configure self.add('case_gen', MultipleWindRosesCaseGenerator()) File "c:\users\perronef\desktop\fusedwind-0.1.0\src\fusedwind\interface.py", l ine 228, in add obj = self._add(name, obj, replace=True) File "c:\users\perronef\desktop\fusedwind-0.1.0\src\fusedwind\interface.py", l ine 272, in _add return super(FUSEDAssembly, self).add(name, obj) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\component.py", line 598, in add super(Component, self).add(name, obj) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\container.py", line 592, in add setattr(self, name, obj) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\datatypes\instance.py", line 90, in validate self._iface_error(obj, name, self.klass.name) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\datatypes\instance.py", line 114, in _iface_error (name, iface_name), TypeError) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\container.py", line 1451, in raise_exception raise exception_class(full_msg) TypeError: : case_gen must provide interface 'IGenericWindRoseCaseGenerator'

ERROR: test_execute (main.test_AEPMultipleWindRoses)

Traceback (most recent call last): File "test_plant_flow_asym.py", line 64, in test_execute cG.add('wf', MyTestWindFarm()) File "c:\users\perronef\desktop\fusedwind-0.1.0\src\fusedwind\interface.py", l ine 228, in add obj = self._add(name, obj, replace=True) File "c:\users\perronef\desktop\fusedwind-0.1.0\src\fusedwind\interface.py", l ine 272, in _add return super(FUSEDAssembly, self).add(name, obj) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\component.py", line 598, in add super(Component, self).add(name, obj) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\container.py", line 592, in add setattr(self, name, obj) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\datatypes\instance.py", line 90, in validate self._iface_error(obj, name, self.klass.name) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\datatypes\instance.py", line 114, in _iface_error (name, iface_name), TypeError) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\container.py", line 1451, in raise_exception raise exception_class(full_msg) TypeError: : wf must provide interface 'IGenericWindFarm'

ERROR: test_configure (main.test_AEPSingleWindRose)

Traceback (most recent call last): File "test_plant_flow_asym.py", line 23, in test_configure aep.configure() File "c:\users\perronef\desktop\fusedwind-0.1.0\src\fusedwind\plant_flow\asym. py", line 193, in configure self.add('case_gen', SingleWindRoseCaseGenerator()) File "c:\users\perronef\desktop\fusedwind-0.1.0\src\fusedwind\interface.py", l ine 228, in add obj = self._add(name, obj, replace=True) File "c:\users\perronef\desktop\fusedwind-0.1.0\src\fusedwind\interface.py", l ine 272, in _add return super(FUSEDAssembly, self).add(name, obj) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\component.py", line 598, in add super(Component, self).add(name, obj) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\container.py", line 592, in add setattr(self, name, obj) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\datatypes\instance.py", line 90, in validate self._iface_error(obj, name, self.klass.name) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\datatypes\instance.py", line 114, in _iface_error (name, iface_name), TypeError) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\container.py", line 1451, in raise_exception raise exception_class(full_msg) TypeError: : case_gen must provide interface 'IGenericWindRoseCaseGenerator'

ERROR: test_run (main.test_AEPSingleWindRose)

Traceback (most recent call last): File "test_plant_flow_asym.py", line 28, in test_run aep.add('wf', TestWindFarm()) File "c:\users\perronef\desktop\fusedwind-0.1.0\src\fusedwind\interface.py", l ine 228, in add obj = self._add(name, obj, replace=True) File "c:\users\perronef\desktop\fusedwind-0.1.0\src\fusedwind\interface.py", l ine 272, in _add return super(FUSEDAssembly, self).add(name, obj) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\component.py", line 598, in add super(Component, self).add(name, obj) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\container.py", line 592, in add setattr(self, name, obj) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\datatypes\instance.py", line 90, in validate self._iface_error(obj, name, self.klass.name) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\datatypes\instance.py", line 114, in _iface_error (name, iface_name), TypeError) File "C:\OpenMDAO\openmdao-0.10.3.2\lib\site-packages\openmdao.main-0.10.3.2-p y2.7.egg\openmdao\main\container.py", line 1451, in raise_exception raise exception_class(full_msg) TypeError: : wf must provide interface 'IGenericWindFarm'

---

Ran 6 tests in 0.047s

FAILED (errors=4)

Are you able to easily detect where the issue is? I thank you for the support.

[fzahle]

I'll assign this to @piredtu since its his code you're having issues with.

[fperrone2]

As far as I see, the problem is related to 'IGenericWindRoseCaseGenerator' and 'IGenericWindFarm' interfaces.

[fzahle]

weird, I can't reproduce the error on Mac, but in Windows I can. @piredtu, something goes wrong with this InterfaceSlot you use in your code:

https://github.com/FUSED-Wind/fusedwind/blob/develop/src/fusedwind/plant_flow/asym.py#L171

[fperrone2]

Yep, I forgot saying that I do work on a Windows machine.

[rethore]

Hi @fperrone2 , Thanks for reporting this. It's indeed only an issue under Windows. @fzahle and I mostly develop under mac, so this bug went under our radar. I have commented out some of the worst offender. The test should hopefully pass now. This is a temporary fix, so I'm not closing this issue yet. I'm going in vacation next week, so nothing new will happen before I'm back.

[fperrone2]

So now I should just download again FUSED-Wind from the github repository, install and run the tests again?

[rethore]

If you do a git pull in the fusedwind directory, that should download the newest commits. After that, you should be able to run the tests directly. I don't have to reinstall all the time, but I'm not 100% sure this will work for you as you are using a different setup that I do. If it doesn't work, try to re-install fused wind again (setup.py install...)

[fperrone2]

I just checked the tests again and, as hoped, they all succeeded. The last question I have so far is: since now all the tests worked out, am I in the position of running the tutorials without major efforts? However, for the future, I'd like knowing if this mini Windows-bug will be successfully solved.

[rethore]

Yes, the tutorials should be functional now. We do plan to support windows, linux and mac. So the bug will be fixed.