FUjr
commented
4 days ago Flashing Tutorial
Materials Needed:
- An IPQ4019 device with SPI and NAND
- SPI flashed with AC2/AC3 routerboot dump
- Properly connected serial port
- Netinstall
- RouterOS
- Optional packages
Extract Netinstall and Configure Firewall Permissions
- Some software or specific versions of Windows have strict security settings, so you may need to manually allow the firewall (optional).
Configure Network Adapter
- Set a static IP for the network adapter. Example: IP: 192.168.88.2, Subnet Mask: 255.255.255.0. The gateway and DNS do not affect the process, but Windows requires a valid address, so you can use 192.168.88.1.
Set Up Netinstall
- Click on NetBIOS and enable it.
- Enter an IP to assign to the router. Example: 192.168.88.3 (must be in the same subnet and not conflict with other IPs).
Connect the Router and Power It On [Watch Serial Output]
- If the mainboard has no system, it will automatically boot via BOOTP, and you can skip the following steps.
- If the mainboard has a system, you need to interrupt routerboot, enter 'o' to select the boot device, then enter '1', followed by 'x', and finally 'y' to wait for a reboot.
Netinstall System Installation
- When BOOTP scans and detects Netinstall, it will automatically enter the waiting screen for flashing.
- On your computer's Netinstall, select the device, choose the required packages, and install them.
Copy Software ID to GitHub Issue to Obtain Key
- For personal research use only.
- If you paid for this tutorial, please provide timely feedback and report the seller.
刷机教程
材料准备：
- 一台有spi和nand的ipq4019设备
- spi刷好ac2/ac3的routerboot dump
- 将串口连接好
- [netinstall ](https://github.com/FUjr/MikroTikPatch/releases/download/7.16.2/netinstall-7.16.2.zip)
- [routeros](https://github.com/FUjr/MikroTikPatch/releases/download/7.16.2-arm/routeros-7.16.2-arm.npk)
- 可选的[软件包](https://github.com/FUjr/MikroTikPatch/releases/download/7.16.2-arm/all_packages-arm-7.16.2.zip)
将netinstall解压并添加防火墙通过许可
- 安装了某些软件或者特定版本的windows有较强的安全性设置，需要手动放行防火墙（可选）
设置网卡
- 设置网卡静态ip 示例： IP: 192.168.88.2 子网掩码:255.255.255.0 网关和DNS不影响流程的进行，但是windows要求输入一个合法的地址，因此可以取192.168.88.1
设置netinstall
- 点击netbois 选择启用
- 输入一个分配个路由器的IP 示例: 192.168.88.3 (需要同网段且IP不可冲突)
将路由器连接好网线，接入电源【留意串口输出】
- 若主板已经没有系统，会自动bootp，可跳过下面的步骤
- 若主板已经有系统，则需要打断routerboot，输入o选择启动设备，输入 1 再输入 x 最后输入 y 等待重启
netinstall安装系统
- 当bootp扫描到netinstall后会自动进入等待刷机的界面
- 在电脑上的netinstall选择设备，选择需要的软件包并安装
复制software-id到github issue以获取key
- 仅限个人研究使用
- 如果你为此教程付费，请及时反馈并投诉卖家
Zxhnet8
king007git01
中文： 本镜像仅限个人测试使用，请大家在此处粘贴software-id，我会定期检查该issue并回复激活码。
English: This image is for personal testing purposes only. Please paste your software ID here, and I will regularly check this issue and respond with the activation code.
Русский: Этот образ предназначен только для личного тестирования. Пожалуйста, вставьте свой идентификатор программного обеспечения сюда, и я буду регулярно проверять этот вопрос и отвечать кодом активации.