search

FYSETC / Catalyst_Kit

Control board kit dedicated to voron0, minimalist wiring.
17 stars 4 forks source link

Display problem #8

Open edanko opened 9 months ago

edanko commented 9 months ago

Hi. Encoder usage on the display causes i2c timeout errors. Updating to latest debian image and klipper firmware does not affect this issue. klippy.log.2024-02-16.zip

DylanPW commented 7 months ago

I've had the same issue for a long time, unfortunately recently I think the display has started becoming intermittent during printing. I did read somewhere that the display cable running over the power supply could be a contributing factor but I'm yet to test this. Will report back once I do.

niedze72 commented 4 months ago

Ich hatte das gleiche Problem, Trennt auf der einen Seite das Kabel Leitung 5 und 6 (SDA ,SDL). Verdrillt die Leitungen miteinander und verbinde sie wieder. Das Problem ist danach weg.

Viel Eerfolg

I had the same problem, On one side, separates cable lines 5 and 6 (SDA, SDL). Twist the cables together and reconnect them. The problem goes away after that.

Many success