search

FYSETC / FYSETC-Mini-12864-Panel

This is a opensouce, cheap, with RGB indicator, common to Marlin's display, supports offline printing, resolution is 12864, display area is 2.4'', SD card holder can be side or vertical, convenient for different installation occasions Ideal for small 3D printers.
https://www.aliexpress.com/item/32970936729.html
65 stars 26 forks source link

Screen does not activate/update until click button #10

Open danbrianwhite opened 3 years ago

danbrianwhite commented 3 years ago

When using Marlin, mks robin e3 board and a Fysetc mini display, the display does not automatically.change from the "Marlin" version screen. It gets stuck and needs a rotary button press. Then once button pressed, it goes to info screen.

Sometimes, the screen does not update after button reset pressed. And is "stuck" on previous printing screen until you press.the rotary button.

Any ideas of what is wrong or what code needs to be added to Marlin to fix this?

I can code it if I get a hint or direction front he Fysetc devs.

Best, Dan

kjanek commented 3 years ago

Could you send me a link to a guide how you have made this screen almost working on the mks robin e3. Because I have a MKS Robin E3D and cant figure out how to set things correctly in marlin, so that it shows text on screen (neopixel is working - i have a 2.1 version of the screen) but the screen stays blank.

mks-viva commented 3 years ago

@danbrianwhite @kjanek https://github.com/makerbase-mks/MKS-Robin-E3-E3D/wiki/FYSETC_BTT_MINI12864

Yurumakum48 commented 3 years ago

Hello how are you? I'm having a problem with the MINI FYSETC 12864 RGB LCD board, I'm not able to configure it in Marlim at all! I've tried it in several versions of Marlim since 1.1.9 / 1.1.x / 2.9.1 / 2.9.2 / 2.0.x but in none of them I can get it right! The motherboard is from Creality ATMEGA 2560 V2.2. The most I could do was make the LCD turn on all the lights, but it doesn't turn on the screen, I tried everything but nothing solved, it was a long 5 days trying, could anyone out there help me with this problem? Attached images for further clarification. Arduino used and the 1.8.16 Thank you all. Placa Creality v2 2 FYSETC LCD MINI 12864

ejhoness commented 2 years ago

"Connect the EXP1 and EXP2 cable to the screen and to the motherboard if it still doesn't work this means you have to rotate the plug 180 degrees."