Closed hwystitch closed 2 years ago
So the two pictures for the 2.2 have conflicting info for pins. the one here https://github.com/FYSETC/FYSETC-SPIDER/blob/main/images/Spider_v2.2_wiring.jpg shows the ground as the first and fourth pin with the pwm pin going off to nowhere.... and the wiring pic here https://raw.githubusercontent.com/FYSETC/FYSETC-SPIDER/main/images/Spider_V2.2_Pinout.jpg shows the grounds as 2 and 5. So which way to actually wire the bltouch. Really dont wanna fry my bl touc or mainboard.
Thanks
I just update the pinout jpg, it is not right. Actually you can check the pin label at the back of the board. Thanks
thanks
So the two pictures for the 2.2 have conflicting info for pins. the one here https://github.com/FYSETC/FYSETC-SPIDER/blob/main/images/Spider_v2.2_wiring.jpg shows the ground as the first and fourth pin with the pwm pin going off to nowhere.... and the wiring pic here https://raw.githubusercontent.com/FYSETC/FYSETC-SPIDER/main/images/Spider_V2.2_Pinout.jpg shows the grounds as 2 and 5. So which way to actually wire the bltouch. Really dont wanna fry my bl touc or mainboard.
Thanks