search

FabienFerrero / UCA_Board

Gerber Layout of the UCA board
35 stars 14 forks source link

How to tune the antena for a 1mm board. #11

Closed ludiazv closed 3 years ago

ludiazv commented 3 years ago

Thanks Fabien for this project.

Some manufactures do not offer 0.8mm on some services. The thiner they offer is 1mm. Can the antenna be tuned for that thickness or requires a new desing?

FabienFerrero commented 3 years ago

Dear Ludiazv,

The antenna can be easily tuned by cutting the top line (see document on antenna tuning). For 1mm pcb thickness, the actual antenna frequency will be probably decreased by few MHz, so a very short cut (1 mm max) will be needed. Whatever, if you keep actual configuration, the decrease in performance will be very small

ludiazv commented 3 years ago

Thanks a lot.