Tunning antenna - Githubissues

FabienFerrero / UCA_Board

Gerber Layout of the UCA board

35 stars 14 forks source link

Tunning antenna #9

Open lbauchwitz opened 5 years ago

lbauchwitz commented 5 years ago

I configure gw with 91 MHZ Band, in the frequency 913.88 I read the antenna tuto but i dont understand. I need to make a cut at 21 mm? to tune? (I see the yellow curve) Thanks in advance

FabienFerrero commented 5 years ago

Hi,

Sorry for my late answer,

Yes, you need to cut at 21mm from the edge. To move the antenna from 868 to 914MHz, the antenna need to be shorter.

Kind regards

Fabien