Typhon2 fire alarm wiring

[AdrianNumbers]

Disclaimers

• [X] I have searched the issue tracker to check if the issue has already been reported.
• [ ] My issue happened while using mods.

What happened?

i was doing some editor/electrical "magic" on Typhon2 since im customizing for my crew and while checking if i didnt screw any old systems i found that fire alarm system is not wired properly. Since it might have been me who changed it and forgot about it i checked fresh vanila sub and those few "faulty" components and wires are the same in both so i can only assume that its broken originally. also it seams that light component (in command room) next to text display "airlock" isnt connected to anything so it looks as unfinished or abandoned system.

Reproduction steps

if you look at fire alarm in command room and go 2 "or" components down the wire you will come to point where it have 2 smoke detectors wired in 1 right next to it and second in reactor room , and next to that one in reactor room is another "or" with one wire in that comes from next "or" in system and all other pins empty, so i assume smoke detector in reactor room should be connected to that "or" insted and its output to "or" in central access passage (long horizontal corridor with windows) on pin that was occupied by reactors room smoke detector.

Bug prevalence

Happens every time I play

Version

v1.0.8.0

-

No response

Which operating system did you encounter this bug on?

Windows

Relevant error messages and crash reports

No response

[Regalis11]

Fixed in https://github.com/Regalis11/Barotrauma-development/commit/f92174d7827ec162f149ae072a65db465c1f42e1

[Rokvach]

Tested, working correctly. Closing.