Closed evilUrge closed 4 years ago
try connecting using other method as it will be using Bluetooth. i have experienced this myself.
Sendt fra min MI MAX 3 Den Gilad Maoz notifications@github.com, skrev 30. okt. 2019 17:56:
I've installed version 0.8.7 with 0099 firmware, the firmware was installed successfully and downgraded my camera (tf_recovery.img was renamed to tf_recovery.img.bak )
Because it wasn't connected yet to MI Home; I had to remove the SD card and connect it to my network via MI Home.
The camera was talking in Chinese as it should; but i never managed to pass the WIFI QR Code scanning I suspect that the driver of the camera might be fucked and it doesn't taking a proper image (hence can't really scan a simple QR)
Tried all the firmwares mentioned in Recovery Debrickhttps://github.com/Filipowicz251/mijia-1080P-hacks/wiki/Recovery---Debrick; but same result.|
Any idea on how can I perhaps make the camera connect to the network without using MI Home\QR scanning =| (or revert to factory version; this camera used to work)
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHubhttps://github.com/Filipowicz251/mijia-1080P-hacks/issues/66?email_source=notifications&email_token=AHLBSJTUZU5CLYATWSEYXHDQRG4FDA5CNFSM4JG43S62YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HVPV3ZQ, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AHLBSJUA63G3BEX5FXTUW4DQRG4FDANCNFSM4JG43S6Q.
Yeah I read about it before; but because I couldn't find "Pair using bluetooth" in MI home I thought it's not possible.
Just downgraded to 4.0.11 and it worked!!!!! =D
Thanks @tobbegutt
Yeah I also had issues - and there is indeed a hidden connect via Bluetooth option - connected on my Android phone with MI Home 4.0.11. When I did it up and going again the image was corrupted in MiHome. I've obviously borked the sensor information. Annoying as I've battled my way to getting SSH working - although the camera just makes an AP and a new network.
I've installed version 0.8.7 with 0099 firmware, the firmware was installed successfully and downgraded my camera (
tf_recovery.img
was renamed totf_recovery.img.bak
)Because it wasn't connected yet to MI Home; I had to remove the SD card and connect it to my network via MI Home.
The camera was talking in Chinese as it should; but i never managed to pass the WIFI QR Code scanning I suspect that the driver of the camera might be fucked and it doesn't taking a proper image (hence can't really scan a simple QR)
Tried all the firmwares mentioned in Recovery Debrick; but same result.|
Any idea on how can I perhaps make the camera connect to the network without using MI Home\QR scanning =| (or revert to factory version; this camera used to work)